|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
January 24, 2013, 12:05 PM | #276 |
Senior Member
Join Date: July 18, 2010
Location: Independence Missouri
Posts: 4,585
|
Getting ready to load and test some 150 E-Tip bullets from Nosler, using RL19. They send the bullets packed with a little yellow piece of paper saying start at min. powder weights and don't go over mid level loads, also this bullet needs to be seated .050 to .090 off lands.
I hope this ain't another goose chase, I can't afford those!!
__________________
Keep your Axe sharp and your powder dry. Last edited by hooligan1; January 27, 2013 at 09:28 AM. |
January 26, 2013, 08:10 PM | #277 |
Member
Join Date: December 18, 2010
Location: Central California
Posts: 65
|
38 super+p
just got done loading 500 38 super with brand new starline brass 6.6gr of power pistol pushing a .356 125gr hornady Hap bullet. I really can't wait to blast these off and repeat the process
Huh |
January 27, 2013, 10:01 PM | #278 |
Senior Member
Join Date: October 24, 2009
Posts: 280
|
Finished reloading some test rounds for .357 magnum and 7.62x54r.
__________________
When seconds count, why is help minutes away? |
January 27, 2013, 10:20 PM | #279 |
Member
Join Date: November 11, 2012
Posts: 72
|
Today, I did another 20 rounds of 223.
Hornady 55 grain FMJ, 25.3 grains H4895, CCI 400 primer and Remington brass. I consistently get 2" groups at 100 yards with my Mini-14, using this load. I've got plenty now for my summer shooting, about 400 rounds of 223 loaded up, ready to go. |
January 28, 2013, 09:54 AM | #280 |
Senior Member
Join Date: January 23, 2013
Location: Forgottonia, Il
Posts: 217
|
Got the day off because of the rain and thawing yesterday. The ground is an inch of slick mud atop frozen. So we are done until it freezes back up.
Got the TiteGroup out and starting at 4.1 going to put in some 115 FMJ to 9mm Brass. I am breaking out my old cronograph and if I can get it working I am going to crono some of my 9mm Red Dot loads. I also found some '70s State Police issued Winchester 9mm in the cabinet and 5 of them are going through the crono as well. If there is time the 4.1 grain TiteGroup is going through. Also slow cooking a pork shoulder in BBQ sauce. |
January 28, 2013, 10:36 AM | #281 |
Member
Join Date: March 20, 2011
Posts: 50
|
I'll be finishing up a batch of 100 .270 Win, tipped with 130 grain Speer spitzer,
being pushed by 53 grains of H 4350, and primed with Rem No. 9 1/2 LRP. Ill be getting started on a batch of 100 .380's for the wife, 95 grain Rem FMJRN, pushed by 3.7 grains of 231, primed with CCI SPP. If I have time, I need to get started on a batch of 6 MM Rem. tipped with 75 grain Speer HP. 47 grains of H 4350, primed with Rem No. 9 1/2 LRP |
January 29, 2013, 02:51 PM | #282 |
Senior Member
Join Date: September 16, 2009
Location: I live in the foot of the Green Mountains of Vermont
Posts: 1,602
|
35 Whelen , 200Gr. Hornadys
__________________
Don't forget to have your liberals spayed or neutered ! |
January 30, 2013, 05:00 PM | #283 |
Senior Member
Join Date: July 18, 2010
Location: Independence Missouri
Posts: 4,585
|
JHLL, My rifle loves that load, however I use a 130 grain Accubond, and a Barnes TTSX in 130 grain, they shoot almost identical......
__________________
Keep your Axe sharp and your powder dry. |
January 30, 2013, 06:24 PM | #284 |
Senior Member
Join Date: January 27, 2013
Posts: 116
|
Just finished up loading 80 rounds of 7mm mag. 150 gr.Sierra Game King, 60.2 grains of H4831, CCI lrm primmer. This is a moa load out of my browning a-bolt.
|
January 30, 2013, 06:34 PM | #285 |
Junior member
Join Date: July 13, 2012
Posts: 179
|
Made 18 .44 Magnum rounds of an SD workup load and Im waiting to see what my S&W 629-4 likes the best..
6 - Hornady XTP 300gr over 15.4gr of 2400 w/ CCI Mag Primer 6 - Hornady XTP 300gr over 16.2gr of 2400 w/ CCI Mag Primer 6 - Hornady XTP 300gr over 17.0gr of 2400 w/ CCI Mag Primer Cant wait to get to the range see the fruits of my labor at work! DASHZNT |
January 30, 2013, 09:14 PM | #286 |
Senior Member
Join Date: February 2, 2007
Location: Iowa
Posts: 2,676
|
190 - .32 H&R - 2.5grs TiteGroup, 98gr RNFP
50 - .32 H&R - 6.6grs BlueDot, 85gr. XTP Single Stage |
January 30, 2013, 10:43 PM | #287 |
Junior Member
Join Date: February 29, 2012
Location: southcentral Iowa
Posts: 9
|
40 rds 50 cal. for the S&W 500. 15 gr. Titegroup, 350 gr Hornady XTP, cci large rifle primer.
Nice light load for practice |
January 30, 2013, 10:49 PM | #288 |
Senior Member
Join Date: January 6, 2008
Location: Northeast Colorado
Posts: 1,993
|
327 Fed Mag.
85 Gr. XTP 5.5 gr Unique This is not a published load. Use at your own risk. In my gun it works great. |
January 30, 2013, 10:58 PM | #289 |
Junior member
Join Date: January 21, 2013
Location: NY
Posts: 150
|
Gonna' hit the 45acp's hard this weekend. 230gr lead over 3.5grs Bullseye! Good load, no leading. Gotta' break in my new S&W M&P 45c!
|
January 30, 2013, 11:42 PM | #290 |
Senior Member
Join Date: January 27, 2013
Location: Eastern NC
Posts: 553
|
Loaded 50 rounds of "light" .40 sw loads with unique. 155 grn hp
|
January 31, 2013, 01:50 AM | #291 |
Senior Member
Join Date: March 6, 2009
Location: Middle Tennessee
Posts: 1,128
|
.22-250, 50 grain Nosler Ballistic Tip, H380 powder. Five with 38 grains, five with 38.5. Gonna see what the groups look like when the weather lets up a bit.
__________________
'Merica: Back to back World War Champs |
January 31, 2013, 12:03 PM | #292 |
Senior Member
Join Date: September 21, 2010
Location: az
Posts: 1,332
|
Loaded up some 45 Colt last night, 7.5gr and 8.0gr Unique under a 260gr LSWC. Gotta feed the new Vaquero.
__________________
"When there’s lead in the air, there’s hope in the heart”- Hunter’s Proverb "Feed me, or feed me to something. I just want to be part of the food chain." -Al Bundy |
January 31, 2013, 01:16 PM | #293 |
Senior Member
Join Date: March 27, 2009
Posts: 315
|
Some .303 Brit, 7.62 X 54R Russian, 7.92 X 57 Mauser. Next up (today) 6.5 X 52 Carcano. Spring is coming!
|
February 17, 2013, 11:15 AM | #294 |
Senior Member
Join Date: July 18, 2010
Location: Independence Missouri
Posts: 4,585
|
Just finished FL sizing 80 pieces of 7mm Rem Mag, Winchester brass,, it's in the tumbler goin around, I have visions of Long Range Accubonds coursing through my mind.
__________________
Keep your Axe sharp and your powder dry. |
February 17, 2013, 12:57 PM | #295 |
Senior Member
Join Date: January 7, 2013
Location: hobart,in
Posts: 119
|
loaded 50 rnds of .243 last night 100grn hornady interlock over 34grns of 3031
|
February 17, 2013, 01:37 PM | #296 |
Senior Member
Join Date: January 23, 2013
Location: Forgottonia, Il
Posts: 217
|
.380 ACP. With some 20 year old Red Dot. Reloading .380 is a bargain compared to factory ammo prices, but seating the bullets is not as easy as 9mm on my machine. 50 should be enough for today.
|
February 17, 2013, 02:05 PM | #297 |
Junior Member
Join Date: February 3, 2013
Location: Kalifornia
Posts: 6
|
Working today so my bench is cold and lonely. After rolling up some old faithfuls I loaded up a new batch of .357 on fri, hopefully test em out this week. 125gn gold dots over 2400.
|
February 17, 2013, 02:16 PM | #298 |
Senior Member
Join Date: March 27, 2009
Posts: 315
|
Just finished a run of 350 .22 Hornet and "K" Hornet ... right now about 1/3 the way through a run of 300 .218 Bee and .218 Mashburn Bee.
Spring's coming and I have 23 more boxes of empties to finish before moving on to some wildcat projects. Hurry, Hurry ... tims's a wastin'! |
February 17, 2013, 05:14 PM | #299 |
Junior Member
Join Date: January 25, 2013
Posts: 7
|
Re: The 'what are you reloading today?' thread
Loaded some 9mm Friday night with 124 RN Ranieir, Tula Small Pistol primers, and hogdon titegroup. This was my first reload ever so did 50 total, 10 at 3.8, 3.9, 4.0, 4.1, and 4.2. All on a Lee classic turret press. Shot them today and had no problems. Really liked the way the 3.8 and 3.9 shot. I think I am addicted to reloading now...
|
February 17, 2013, 07:52 PM | #300 |
Member
Join Date: December 20, 2012
Location: Florida
Posts: 31
|
Just finished hand priming 400 .38 cases with Federal #100's
and 200 9mm with Tula's May be a small workout for the turret press tomorrow if the weather holds up! |
|
|