September 9, 2012, 09:38 PM | #1 |
Senior Member
Join Date: July 21, 2011
Location: Idaho
Posts: 7,839
|
springfield sniper 03
so today I was out fishing with a good friend and when the conversation turns to guns he lets slip that he just got his dads "springfield sniper rifle" and recently acquiring my own 1903A4 I was very interested. I asked him more about it and he said that it was a bring back and stayed in the mans closet until his dad got ahold of it a few years back when I asked to see it I was disappointed to say the least
post 800g serial springfield with a welded on bent knob with a hideous stock chop, replacement barrel, front sight subsequent drill and tap on the receiver...I felt a little sad to have to tell him that it was not a sniper rifle but he was pretty happy when I let him know about the history of the rifle and how all of the modifications were done.
__________________
ignore my complete lack of capitalization. I still have no problem correcting your grammar. I never said half the stuff people said I did-Albert Einstein You can't believe everything you read on the internet-Benjamin Franklin |
September 9, 2012, 10:05 PM | #2 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,833
|
Sad story.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
September 9, 2012, 11:50 PM | #3 |
Senior Member
Join Date: July 21, 2011
Location: Idaho
Posts: 7,839
|
yeah he loves guns and loves to learn their history but doesn't really know where to turn for research so he ends up having to trust what people tell him.
luckily I have a spare, inletted straight stock(I know, not correct) that is still full length(with hand guard) and with little more than an 8 dollar handguard ring and a 50 dollar bayonet lug from numrich I can convert his horrible sporterizing job into a pseudo-midgrade replica job. yes the barrel will be blued, the receiver has slots for the rear sight hood(whatever it's called in the original o3s), and it'll be a straight stock instead of C or scant but it should raise the value a bit from bubba special to almost gibbs-grade rifle. out of curiosity, upon, closer inspection of the bolt,(I don't know the nonclemature yet) the bolt housing(part that the decocker goes inside) is marked "R"(which I know means remington) but the bolt knob does not bear the associated "R" or any other maker stamp. it does have very close to proper angle for the bolt angle and is actually a solid piece unlike the original appraisal as welded on. lastly, the safety(which does not work with the scope currently mounted) seems like it has an unusually long safety switch which I have never seen before, almost like the "tactical" ambidextrous charging handles for AR15s versus standard charging handles. were some of these bolts made like this or was this an addon during the sporterizing process? sorry for a lack of pics, neither of us have cameras at the moment.
__________________
ignore my complete lack of capitalization. I still have no problem correcting your grammar. I never said half the stuff people said I did-Albert Einstein You can't believe everything you read on the internet-Benjamin Franklin Last edited by tahunua001; September 10, 2012 at 01:24 AM. |
September 10, 2012, 07:34 AM | #4 | |
Senior Member
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,923
|
Quote:
|
|
September 10, 2012, 06:52 PM | #5 |
Senior Member
Join Date: September 28, 2010
Location: Pinckney,Michigan
Posts: 151
|
so...it wasn't a bring back ?
|
September 10, 2012, 10:47 PM | #6 |
Senior Member
Join Date: July 21, 2011
Location: Idaho
Posts: 7,839
|
haha nice.
bring back is my wording, not his. basically the claim was that it belonged to a sniper in WWII and when the war ended he took his old companion with him. of course this is nothing more than some grunt bringing back his rifle and chopping it up like all his buddies were doing to the mausers they brought back and somebody making up nonsense along to way to try and get rid of it.
__________________
ignore my complete lack of capitalization. I still have no problem correcting your grammar. I never said half the stuff people said I did-Albert Einstein You can't believe everything you read on the internet-Benjamin Franklin |
October 7, 2012, 09:30 PM | #7 |
Senior Member
Join Date: July 21, 2011
Location: Idaho
Posts: 7,839
|
well he just got the green light to do whatever he wants to the springfield so I'm going to slap on my spare springfield stock and turn it into an A4-gery it's going to be Legen....wait for it.....DARY!
__________________
ignore my complete lack of capitalization. I still have no problem correcting your grammar. I never said half the stuff people said I did-Albert Einstein You can't believe everything you read on the internet-Benjamin Franklin |
October 8, 2012, 05:48 PM | #8 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
FWIW, it was illegal for GIs to "bring back" U.S. or Allied weapons. Enemy weapons were OK (not full auto though) and obviously German and Japanese guns were brought back by the ton. But bringing home a U.S. weapon was theft, pure and simple. Some got away with it, but quite a few GIs spent time in resorts like Ft. Leavenworth for "liberating" Uncle's gun.
Jim |
October 8, 2012, 10:43 PM | #9 |
Senior Member
Join Date: July 21, 2011
Location: Idaho
Posts: 7,839
|
very true, however it is a bit moot now since the statuette of limitations has run out on all those bring backs so anyone caught with one can't be prosecuted...not that it's very easy to prove anyway since there are no definitive paper trails.
also a select few were allowed to take their rifles home. Alvin York was awarded his rifle when he returned home from WWI for instance.
__________________
ignore my complete lack of capitalization. I still have no problem correcting your grammar. I never said half the stuff people said I did-Albert Einstein You can't believe everything you read on the internet-Benjamin Franklin |
October 9, 2012, 06:12 AM | #10 | |
Senior Member
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,923
|
Quote:
|
|
October 9, 2012, 11:38 AM | #11 |
Senior Member
Join Date: May 30, 2010
Location: Arizona or Ohio depending
Posts: 1,021
|
Yes they did have paperwork but paper gets lost, destroyed, thrown away, ect. so it isn't often seen. In fact if that GI permission slip is with a matching gun you will pay more because of it.
|
October 9, 2012, 04:30 PM | #12 |
Senior Member
Join Date: July 21, 2011
Location: Idaho
Posts: 7,839
|
interesting, that's the first time I've seen an actual piece of paper authorizing bring backs. I might steal that incase I ever see someone claiming to have paperwork with a gun.
for me if it's not an american gun and does not have an importer mark then I assume it was a bring back... I prefer those anyway, my savage no4 MK1* has the CAI etchings in it and I cringe every time I see it.
__________________
ignore my complete lack of capitalization. I still have no problem correcting your grammar. I never said half the stuff people said I did-Albert Einstein You can't believe everything you read on the internet-Benjamin Franklin |
October 9, 2012, 06:28 PM | #13 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
A lot of folks deplore the import markings, especially of they are large and/or in a conspicuous place, but no milsurps could be imported without some mark, so the alternative is marked guns or no guns.
Those so-called "capture papers" were supposed to be given out for any and all captured enemy equipment that was going to be kept by the GI. There was no specific form; some were printed, but many were just typed and mimeographed. I have seen papers like that for M1911A1 pistols, and M1 carbines, all fake. There are endless rumors and stories, but no officers legally set up tables and sold M1 rifles in a war zone, no soldiers legally brought back their issue weapon, General Patton did not hand out pistols or rifles in lieu of medals. But "I was given this rifle by Patton himself" sounds a lot better than "I got this rifle by courageously writing a check to DCM." Jim |
October 10, 2012, 06:28 AM | #14 | |
Senior Member
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,923
|
Quote:
|
|
|
|