|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
August 26, 2013, 03:45 PM | #1 |
Member
Join Date: September 28, 2012
Posts: 44
|
.20-6.8SPC 30 degree Imp. Reamer?
I bought this reamer from PTG, thinking about turning a rim recess into the chamber and using .30-30 WCF brass as the parent instead.
Regardless, I'm not too sure where to start with this beast. No reloading data I've found; the chamber reamer is an improved version of the .30 Remington case necked down to take a .204" projectile. Any ideas? I'll probably use a modified .204 Ruger FL sizing die to bump a false shoulder on the parent case, then fireform. Hope I won't need to inside neck ream.... Thanks, jkpq45 |
August 26, 2013, 04:13 PM | #2 |
Senior Member
Join Date: July 26, 2006
Location: Southern Minnesota
Posts: 9,333
|
6.8 SPC brass is available... is there any reason you need / want a rim ???
__________________
In life you either make dust or eat dust... |
Thread Tools | Search this Thread |
|
|