May 9, 2005, 05:12 PM | #1 |
Member
Join Date: March 1, 2005
Location: Clearview, WA
Posts: 23
|
Ruger 10/22 bits
Please move this if it has been impropperley placed.
About a week ago my usual gun matinence was interupted, and long story short I cant find several of the pins to the lower part/trigger assembely of my Ruger 10/22 rifle. I did a forum search and quite a bit of web browsing, but I havent found a web site that sells replacement pins (These are the little teeney ones that hold all of the trigger assembelys such and such in place) for my rifle, and the local shops dont have anything, either. So, can anyone here help me out?
__________________
I may only be 16, but I happen to know what I'm doing. Now were is the safety on this thing? |
May 9, 2005, 05:35 PM | #2 |
Senior Member
Join Date: March 16, 2005
Location: Happy Valley, USA
Posts: 649
|
call Ruger directly. It's the only source I know of. Try this:
Sturm, Ruger & Co., Inc. Attn: Service Department 411 Sunapee Street Newport NH 03773 Telephone: 603-865-2442 Fax: 603-863-6165 |
May 9, 2005, 06:19 PM | #3 |
Senior Member
Join Date: March 21, 2005
Posts: 2,181
|
http://www.igun.com/par.html
Check it out. There are plenty of places on the net that sell accessories for the 10/22. There's always the parts booklet which can be found here and you can order directly from Ruger. Go here for the complete list of Ruger rifle parts booklets. I'm not sure exactly what kind of 10/22 you have (I'm assuming it's the carbine & not the magnum). Good luck bud. |
May 9, 2005, 08:28 PM | #4 |
Member
Join Date: March 1, 2005
Location: Clearview, WA
Posts: 23
|
Thanks guys...I'll put in a call to Ruger, otherwise it looks like i'll have to buy a tirgger assembely...Might as well upgrade to a match grade one, anyway.
__________________
I may only be 16, but I happen to know what I'm doing. Now were is the safety on this thing? |
May 10, 2005, 02:45 AM | #5 |
Senior Member
Join Date: July 19, 2004
Location: Ms
Posts: 1,160
|
e-Gunparts.com
Numrich has all of the pins you needs as well as Stafford Sales out of Baton Rouge, La. Google both of them. They usually are neck and neck in price and availability. You can't go wrong using Ruger as well.
|
May 12, 2005, 04:30 PM | #6 |
Senior Member
Join Date: November 15, 2004
Posts: 304
|
I found this picture of a 10/22 bullpup stock that modifies it to resemble the famous Walther WA-2000 sniper rifle:
...but I can't find any information on it! Anyone know anything about it? |
May 13, 2005, 08:07 AM | #7 |
Senior Member
Join Date: February 4, 2001
Posts: 956
|
Brownells sells Ruger factory parts, including the 10-22 pins, on-line.
Brownells Along with damn near everything else on earth... Larry
__________________
He who fights and runs away had better run pretty damn fast. Government, Anarchy and Chaos |
Thread Tools | Search this Thread |
|
|