August 17, 2009, 07:04 PM | #1 |
Junior Member
Join Date: September 8, 2008
Posts: 3
|
S&W500 and 300wsm
Do any of you currently reload BOTH of these cartridges? Need some help...
|
August 18, 2009, 06:33 AM | #2 |
Senior Member
Join Date: April 5, 2008
Location: South Central Minnesota
Posts: 584
|
Navyguy,
I don't load either, but, if you ask your question maybe we can get you the help you seek. These two are some serious mag rounds. What help is it that you are looking for? |
August 18, 2009, 07:25 AM | #3 |
Senior Member
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,747
|
Yup, you need to ask away.
I load 7mmWSM so I may be able to assist on the rifle side.
__________________
NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor “Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......” President John F. Kennedy |
August 18, 2009, 09:30 AM | #4 |
Senior Member
Join Date: December 23, 2005
Location: Minnesota
Posts: 2,955
|
No and Yes.
|
August 18, 2009, 01:01 PM | #5 |
Senior Member
Join Date: December 31, 2008
Posts: 260
|
I have not loaded for the 500 but I have worked on the 300wsm some.these loads were worked up in a masuer 98 action with a 28 in barrel, so work up in your rifle.with RL-19 170gr match 66.0grs,same for the168 and 180 bullets.But when RL17 came out it really got going:130gr-69.3rl-17,same charge for the 150 gr bullet.68.0gr rl-17 165gr match,180 bullet rl-17 66.0,same for the 190gr bullet.the 130 vel was 3375,170 vel was 3154,168 vel was 3124,190 vel was 3019,180 vel was 3053.Just for kicks I loaded some 90gr xtp bullets with 68grs of rl-19 vel was 3539 and shot dime holes at 100 yrds.Hope this gives you some help.Good Luck
|
|
|