Need help with a Winchester ranger 120 12 gauge

Hammercrg29 · July 11, 2015, 04:10 PM

I have a Winchester ranger 120 12 gauge that is chambered for 2-3/4" and 3" shells and need to replace an ejector-pin type retainer. The only ejector I can find to buy is for a 2-3/4" chamber. My question is, is this the right one that will work for both 2-3/4" and 3" shells or do I need to try and find a different one chambered for 3"? I cannot find an ejector for 3" chamber listed or information on one anywhere. Any help or information would be greatly appreciated.

Dixie Gunsmithing · July 11, 2015, 05:44 PM

The ejector should be the same in both. The only difference is the chamber length of the barrel on these, as they took magnums into account when they designed the gun for either or.

Hammercrg29 · July 13, 2015, 05:21 PM

Thanks for the help Dixie, I really appreciate it....especially being new to the site/forums. Thanks again.

Dixie Gunsmithing · July 14, 2015, 07:01 AM

Not a problem, you're welcome.

July 11, 2015, 04:10 PM	#1
Hammercrg29 Junior Member Join Date: July 11, 2015 Posts: 10	Need help with a Winchester ranger 120 12 gauge I have a Winchester ranger 120 12 gauge that is chambered for 2-3/4" and 3" shells and need to replace an ejector-pin type retainer. The only ejector I can find to buy is for a 2-3/4" chamber. My question is, is this the right one that will work for both 2-3/4" and 3" shells or do I need to try and find a different one chambered for 3"? I cannot find an ejector for 3" chamber listed or information on one anywhere. Any help or information would be greatly appreciated.

July 13, 2015, 05:21 PM	#3
Hammercrg29 Junior Member Join Date: July 11, 2015 Posts: 10	Need help with a Winchester ranger 120 12 gauge Thanks for the help Dixie, I really appreciate it....especially being new to the site/forums. Thanks again.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

July 11, 2015, 05:44 PM	#2
Dixie Gunsmithing Moderator Emeritus Join Date: April 27, 2013 Location: Ohio Posts: 1,923	The ejector should be the same in both. The only difference is the chamber length of the barrel on these, as they took magnums into account when they designed the gun for either or.

July 14, 2015, 07:01 AM	#4
Dixie Gunsmithing Moderator Emeritus Join Date: April 27, 2013 Location: Ohio Posts: 1,923	Not a problem, you're welcome.