|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
January 20, 2013, 05:17 PM | #1 |
Senior Member
Join Date: December 21, 2010
Location: Osceola, IN
Posts: 258
|
Inherited Piece...no clue
So it's been sitting collecting dust but I really wanna get this piece up and running again. From the data on the gun itself it is an Armsport Inc. Model 5018 blackpowder pistol.
It doesn't say but appears to be a 44 cal, but again brand new to the blackpowder pistol scene. Anything I need to know about these things? I am taking it in to a gunsmith as soon as I find one with knowledge on BP pistols to have it cleaned and checked over. It doesn't cock without putting the trigger forward and the cylinder can just spin freely so I know it has some issues. Say I get all that fixed, is this a model that can have a conversion cylinder put in to shoot low pressured cowboy loads with modern cartridges instead of manual loads? Crappy cell phone pics but best I can do at the moment:
__________________
~ONLY TWO DEFINING FORCES HAVE EVER OFFERED TO DIE FOR ME (you), JESUS CHRIST AND THE AMERICAN G.I. ONE DIED FOR MY (your) SOUL, THE OTHER FOR YOUR FREEDOM!~ Last edited by tynimiller; January 20, 2013 at 09:57 PM. |
January 20, 2013, 06:07 PM | #2 |
Senior Member
Join Date: December 27, 2010
Posts: 211
|
Help us help you. Provide a few photos.
|
January 20, 2013, 06:11 PM | #3 |
Member Emeritus
Join Date: August 19, 2004
Posts: 7,133
|
If brass frame, don't use conversion cylinders.
Denis |
January 20, 2013, 06:14 PM | #4 |
Senior Member
Join Date: April 20, 2009
Location: High Desert Mountains CA.
Posts: 410
|
Armsport Inc. used to make a bunch of non-firing replica guns...FYI
|
January 20, 2013, 06:27 PM | #5 |
Senior Member
Join Date: January 20, 2009
Location: Amity Oregon
Posts: 791
|
Well--from, a quick google it appears that a Armsport 5018 is a 8"
steel frame copy of a Remington Army. |
January 20, 2013, 07:16 PM | #6 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,188
|
Probably won't take a conversion cylinder.
|
January 20, 2013, 09:33 PM | #7 |
Senior Member
Join Date: December 21, 2010
Location: Osceola, IN
Posts: 258
|
I'll get some pics up tomorrow fellas. It is an octoganal barrel and not a brass frame. It is 8in if I measured and searched appropriately.
__________________
~ONLY TWO DEFINING FORCES HAVE EVER OFFERED TO DIE FOR ME (you), JESUS CHRIST AND THE AMERICAN G.I. ONE DIED FOR MY (your) SOUL, THE OTHER FOR YOUR FREEDOM!~ |
January 20, 2013, 09:58 PM | #8 |
Senior Member
Join Date: December 21, 2010
Location: Osceola, IN
Posts: 258
|
posted a couple pics I had on my phone. Only ones I got at the moment.
__________________
~ONLY TWO DEFINING FORCES HAVE EVER OFFERED TO DIE FOR ME (you), JESUS CHRIST AND THE AMERICAN G.I. ONE DIED FOR MY (your) SOUL, THE OTHER FOR YOUR FREEDOM!~ |
January 20, 2013, 10:11 PM | #9 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,535
|
The (square) AC says made in 1977.
The proof marks say it has been fired at least once. The nipples are missing. The failure to index and lock sound like the hand spring and the trigger/bolt spring are broken, bent out of line, or missing. An Armisport reproduction was made by Armi Sport in italy, the company now doing business as Chiappa... with no current revolvers. A search found a gunboard post in which an Armi Sport was said to accept a Uberti cylinder. I would want a return guarantee from R&D or Kirst before I paid for a conversion cylinder, those things are more expensive than the value of the revolver. |
January 20, 2013, 10:51 PM | #10 |
Senior Member
Join Date: December 21, 2010
Location: Osceola, IN
Posts: 258
|
Thanks Jim, great info and all seems spot on from what I can tell. It is getting looked over on tuesday by some buddies of mine at a local gun shop...see what they say and whether I'll be taking it to a more knowledgeable hand or not after them. Thanks for the info and keep it coming guys if anything else!
__________________
~ONLY TWO DEFINING FORCES HAVE EVER OFFERED TO DIE FOR ME (you), JESUS CHRIST AND THE AMERICAN G.I. ONE DIED FOR MY (your) SOUL, THE OTHER FOR YOUR FREEDOM!~ |
January 21, 2013, 04:14 AM | #11 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
As a recommendation you might try...
....Just selling it and then start from scratch with a new revolver.
Sell it on eBay first the frame with the cylinder out of it and then sell the cylinder in a second listing. Put the nipplies back in the cylinder. Start the listing for the frame at 125.00. There is a Remington frame (Newer) which is now up to 161.00. List it at 12.00 Priority shipping and throw it is a flat rate box. Start the cylinder out at 40.00. Six dollars priority shipping. The n say that you will merge shipping on multiple auctions. I will bet that when the fools are done bidding you'll have 200.00 out of it. Bidders on eBay as a rule either do not follow black powder prices or they just don't care. Right now a brand new Remington is selling for (I think it is back up to) 229.00 from Cabelas. You know it is new. You know you can get a converter for it. Jim is right. You can easily have as much in a converted BP cap and ball revolver as you would pay for a cartridge revolver.
__________________
Seek truth. Relax. Take a breath. |
January 21, 2013, 09:57 AM | #12 |
Junior member
Join Date: January 26, 2012
Posts: 1,066
|
If there is no sentimental value, then what ^^^^ they all said. Sell it on eBay in 2 pieces and walk the money to someplace else and buy a nice new 1858 Remmie copy and a conversion cylinder.
If there is sentimental value, IE: It was your Grandfathers, then things get more interesting. A good smith can likely get it timed and locking right, nipples installed, and maybe reblue the cylinder a bit and you'll have a shooter for about what you would have paid for a new one... Willie . |
January 21, 2013, 09:59 AM | #13 |
Senior Member
Join Date: December 21, 2010
Location: Osceola, IN
Posts: 258
|
Doc I'd be all about doing that if the history of the gun wasn't like it was. It belonged to my wife's grandfather and I inherited it after his passing. The nipples are long gone from what I can tell as they're in nothing I've gotten from his wife since his passing. I know it's gonna be expensive but gonna get this one shooting even if it's just a little at a time.
__________________
~ONLY TWO DEFINING FORCES HAVE EVER OFFERED TO DIE FOR ME (you), JESUS CHRIST AND THE AMERICAN G.I. ONE DIED FOR MY (your) SOUL, THE OTHER FOR YOUR FREEDOM!~ |
January 21, 2013, 10:08 AM | #14 |
Senior Member
Join Date: November 25, 2012
Location: Eaton Rapids, MI
Posts: 445
|
It won't be THAT expensive to get it shooting again. Since it came from family, I'd get it going again!
Keep us posted! Birch
__________________
Black Powder: Not because it is easy, but because it is hard, because that goal will serve to organize and measure the best of our energies and skills, because that challenge is one that we are willing to accept, one we are unwilling to postpone, and one which we intend to win... |
January 21, 2013, 10:20 AM | #15 |
Senior Member
Join Date: December 21, 2010
Location: Osceola, IN
Posts: 258
|
Will do birch. If I were to call someone about a conversion cylinder what companies would you guys recommend that would know for sure yes or no on if it takes one?
__________________
~ONLY TWO DEFINING FORCES HAVE EVER OFFERED TO DIE FOR ME (you), JESUS CHRIST AND THE AMERICAN G.I. ONE DIED FOR MY (your) SOUL, THE OTHER FOR YOUR FREEDOM!~ |
January 21, 2013, 11:06 AM | #16 |
Senior Member
Join Date: August 31, 2009
Location: Arizona
Posts: 171
|
1858
Good advice from the guys. As you are going to keep it I would recomend going to (You Tube) click on vidieos type in 1858 rem. Many different ideas in the loading process. New nipples are not a problem.
|
January 21, 2013, 11:43 AM | #17 | |
Senior Member
Join Date: April 18, 2010
Location: South Carolina
Posts: 237
|
Yes. They're fairly simple to work on yourself.
Quote:
There is a ton of information on YouTube about disassembly & reassembly. And the Pietta website has PDFs with parts breakdown. If its not a Pietta, but an Uberti, then substitute search terms. Cabelas sells a Pietta rebuild kit, as do others I'm sure. But I don't know if it has a replacement hand spring in the kit. VTI has individual parts. If you want to do it yourself, and want examples you can pick up a new one in working order to learn on. Cabelas had them on sale last week. Not sure if its still going on. |
|
January 21, 2013, 12:04 PM | #18 |
Senior Member
Join Date: January 10, 2011
Location: Leesville SC
Posts: 2,652
|
I'm not trying to tell you what to do, but if it was my family heirloom I would not put a conversion cylinder in it. I don't see the point in the whole conversion cylinder thing myself, The things cost more than the gun. If I'm gonna shoot 45LC I will buy a SAA. Track of the wolf can hook you up with nipples, and Dixie gun works may have the parts needed to get her going again. Just my .02
__________________
"I prefer dangerous freedom over peaceful slavery." - Thomas Jefferson |
January 21, 2013, 12:08 PM | #19 |
Senior Member
Join Date: December 21, 2010
Location: Osceola, IN
Posts: 258
|
thanks guys...I'm also starting to debate whether I want to get a conversion kit....I may just grab another BP cylinder for quicker reloading (believe that's possible if research is right).
I don't trust myself enough to mess with it but perhaps I'll delve deeper into it...
__________________
~ONLY TWO DEFINING FORCES HAVE EVER OFFERED TO DIE FOR ME (you), JESUS CHRIST AND THE AMERICAN G.I. ONE DIED FOR MY (your) SOUL, THE OTHER FOR YOUR FREEDOM!~ |
January 23, 2013, 11:55 AM | #20 |
Senior Member
Join Date: September 7, 2012
Location: Crockett, Texas
Posts: 363
|
I wouldn't concern myself about the quick reloading unless you aim to use it for CAS competition.
__________________
"I'm your huckleberry, it's just my game" |
January 23, 2013, 12:43 PM | #21 |
Senior Member
Join Date: January 29, 2005
Location: Southern California
Posts: 344
|
Sentimental value is important, especially if you are keeping the wife happy about the whole thing.
If you are just a plinker or casual shooter, the conversions are way too expensive to get any real value for what you will spend. The Remington design allows for a fairly quick reload with spare preloaded cylinders and look cool on the firing line. If you are going to use the gun in Cowboy Action Shooting matches, a conversion is a godsend (In my humble opinion). But it is expensive. I bought two Kirst Konverters for my Colt's Dragoons and love them and I claim they are worth every dollars I spent on them. But then, I shoot CAS. The beauty is I can go back to the BP cylinders and load them up with cap n ball again. I tell the wife for the price of 5 guns I now have 4... |
January 25, 2013, 08:53 AM | #22 |
Senior Member
Join Date: December 21, 2010
Location: Osceola, IN
Posts: 258
|
Well guys took it into the gun shop I go to all the time (gonna be working their part time here soon even). My buddy there tore it apart and we started looking at what we needed to replace or simply get because it was missing. The gun itself was freaking sludged up bad everywhere save the barrel...you could tell my wife's Grandpa never cleaned anything except the barrel...the barrel was ridiculously nice!!
So I'm currently finding the best place online to buy all the stuff I need for it which is as follows: -Hand and Spring -Cylinder Stop -Trigger and Stop Spring -Nipples Couple Questions for you guys though...we assumed the following link are the nipples I need correct? http://www.dixiegunworks.com/product...oducts_id=4748 Also the barrel turns a little easier than I thought it should...does that mean it needs tightened further? Does it have a hard ending or no?
__________________
~ONLY TWO DEFINING FORCES HAVE EVER OFFERED TO DIE FOR ME (you), JESUS CHRIST AND THE AMERICAN G.I. ONE DIED FOR MY (your) SOUL, THE OTHER FOR YOUR FREEDOM!~ |
January 25, 2013, 09:07 AM | #23 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
When I have gone to parts distributers...
...Including DGW, VTI and some other smaller outfits, it is fifty - fifty that the parts will work straight from the pack on older pistols. And this is even when the vendor tells me the part is a direct replacement.
The two I mentioned plus Numrich, and for ASP originated revolvers, Virginia Sutler in Winchester VA might be a good place to start. Deer Creek in Waldron, Indiana has some parts for Non-Pietta/Uberti revolvers but the original parts are all but worked out of the system (I think). So people who are selling you parts for an ASP or ASM (IMO) are actually just selling you parts that were made by someone else and they are the closest fit to the OEM. Since you need several parts, I echo the previous recommendation to go to Cabela's and buy their parts kit for an 1858 Remington clone. If you find that the parts won't all fit, you can sell the stuff you don't need on eBay and you will get your money back plus. http://www.cabelas.com/product/74023....mc_id=crrdtfd It is on sale now for 29.99 plus forty dollars shipping. . . . I am kidding about the shipping. ;o)
__________________
Seek truth. Relax. Take a breath. |
January 25, 2013, 10:29 AM | #24 |
Senior Member
Join Date: December 21, 2010
Location: Osceola, IN
Posts: 258
|
Thanks doc...I'll do that, like that it comes with a new hammer. I'll consider buying the nipples there too.
__________________
~ONLY TWO DEFINING FORCES HAVE EVER OFFERED TO DIE FOR ME (you), JESUS CHRIST AND THE AMERICAN G.I. ONE DIED FOR MY (your) SOUL, THE OTHER FOR YOUR FREEDOM!~ |
January 25, 2013, 10:36 AM | #25 |
Senior Member
Join Date: February 25, 2009
Posts: 643
|
Well guys took it into the gun shop I go to all the time (gonna be working their part time here soon even). My buddy there tore it apart and we started looking at what we needed to replace or simply get because it was missing. The gun itself was freaking sludged up bad everywhere save the barrel...you could tell my wife's Grandpa never cleaned anything except the barrel...the barrel was ridiculously nice!!
So I'm currently finding the best place online to buy all the stuff I need for it which is as follows: -Hand and Spring -Cylinder Stop -Trigger and Stop Spring -Nipples Couple Questions for you guys though...we assumed the following link are the nipples I need correct? http://www.dixiegunworks.com/product...oducts_id=4748 Also the barrel turns a little easier than I thought it should...does that mean it needs tightened further? Does it have a hard ending or no? That would scare me. I'd put it back together with the parts that came with it and put it on the wall. Go ahead and spend the $200 bucks or so for a safe gun. |
|
|