March 12, 2009, 09:09 AM | #1 |
Junior Member
Join Date: March 12, 2009
Posts: 3
|
Intratec Cat9
Hello, I am a newly registered member but have been reading the forum for a long time. I have just aquired a Intratec Cat9 basically for free when I bought a rifle. It did not have a manual with it. Can anyone help me find a website that I can get a manual or at least a parts breakdown for the gun! Any help would be appreciated!!
|
March 12, 2009, 12:49 PM | #2 |
Junior Member
Join Date: March 12, 2009
Posts: 3
|
I have exhausted google looking. Can anyone at least tell me how to fully break down the gun. I have removed the slide and barrell assembly from the frame but I cant get the barrell out. Thanks!
|
March 12, 2009, 01:23 PM | #3 |
Senior Member
Join Date: November 17, 2004
Location: ~ OKLAHOMA CITY ~
Posts: 380
|
Everything in the slide exits to the rear. Check the attachments, and if you still can't figure it out, contact me direct at [email protected]
I can always use one for parts, if you're of a mind to sell.
__________________
The truth at its worst is superior
to lies at their best. |
March 12, 2009, 05:20 PM | #4 |
Junior Member
Join Date: March 12, 2009
Posts: 3
|
Thanks Old Ironsights worked like a charm. I thought it would look worse in there but it wasn't too bad. Have you done anything to yours except for the sights. How did you do those? What kind of ammo are you feeding it? I thought it was interesting that it fit perfectly in my Fobus paddle for my Glock!
|
March 13, 2009, 08:21 AM | #5 |
Senior Member
Join Date: November 17, 2004
Location: ~ OKLAHOMA CITY ~
Posts: 380
|
Those sights you see on the CAT-9 are factory sights. Intratec made a very few CAT-9's in 9mm and .380 with factory sights.
Square-nosed ammo doesn't feed reliably, but anything with a round nose will work very well.
__________________
The truth at its worst is superior
to lies at their best. |
March 13, 2009, 11:44 AM | #6 |
Junior Member
Join Date: July 29, 2008
Posts: 5
|
Neither of you would happen to have a 9mm Glock that you could photo next to the Cat9? Would you?
That was one of my I WANT guns, but it soon went out of production. I have the closest thing (style-wise, of course) a Glock 26 . |
March 13, 2009, 08:41 PM | #7 |
Senior Member
Join Date: November 17, 2004
Location: ~ OKLAHOMA CITY ~
Posts: 380
|
Attachment is a comparison between one of my CAT-9's and my Glock 33...is that close enough?
__________________
The truth at its worst is superior
to lies at their best. |
April 5, 2009, 10:22 AM | #8 |
Junior Member
Join Date: April 5, 2009
Posts: 1
|
Cat ( Clip
Does anyone know where I could find a Cat9 clip. I've looked everywhere. Thanks!!
|
April 5, 2009, 10:46 AM | #9 |
Senior Member
Join Date: November 17, 2004
Location: ~ OKLAHOMA CITY ~
Posts: 380
|
Gunbroker, Auctionarms and GunsAmerica. Past that you might check MEGA parts.
http://migagunparts.ecrater.com/
__________________
The truth at its worst is superior
to lies at their best. |
February 20, 2013, 05:11 PM | #10 |
Junior Member
Join Date: December 17, 2012
Posts: 1
|
I am looking for a video for the disassembly of the Intratec Mia Fl Cat 9 pistol.
|
Thread Tools | Search this Thread |
|
|