June 4, 2007, 10:55 PM | #1 |
Junior Member
Join Date: May 30, 2007
Posts: 10
|
accurate .221 load?
I am looking for an accurate load for my Rem. 700 LVSF in .221 fireball. Does anyone have any suggestions?
|
June 5, 2007, 07:21 AM | #2 |
Senior Member
Join Date: December 23, 2005
Location: Minnesota
Posts: 2,955
|
I do not have a Rem, but I do have a CZ 221 Fireball. I get excellent results with 40gr Nosler BT seconds and 2400. LilGun woks well also, but I prefer the 2400. My barrel stays cooler longer. Keeps me shooting longer before I have to let it cool down.
|
June 5, 2007, 07:28 AM | #3 |
Member
Join Date: April 7, 2007
Location: Monroe, LA
Posts: 47
|
.221 Powder
Also, take a look at RL-7 and AA1680....I'm currently using the later in my .20VT...which is a comparable cartridge, and formed from .221 brass.....Good luck.
|
June 5, 2007, 07:21 PM | #4 |
Member
Join Date: August 20, 2005
Posts: 16
|
old loads
I used to shoot an XP-100,I used 17 grains 4198 with a 52 grain hp,it was out of a 10 inch bbl,but worked great.John
|
June 5, 2007, 11:08 PM | #5 |
Senior Member
Join Date: January 20, 2007
Location: n/w Wisconsin
Posts: 365
|
+1 on th 4198. I used it for my 14 in. TC.
|
June 7, 2007, 05:18 PM | #6 |
Junior Member
Join Date: May 30, 2007
Posts: 10
|
So far....
I had the barrel floated, and the action bedded, then I tried some 40 gr. Blitzkings with AA1680 (19.5). The second group showed some promise...four shots touching, and one flier. I plan to try some Barnes 40 gr. VLC with the same powder tomorrow.
|
|
|