H&K USP 45 Full size threaded barrel?

mwcolo · February 10, 2009, 10:58 PM

Does anyone know if there are threaded barrels made for the H&K USP 45 full-size? I've seen the threaded Tactical barrel, and the threaded compact barrel (too short), but I don't know if the threaded Tactical would fit correctly.

Thanks for any help!

Jason_G · February 10, 2009, 11:03 PM

The one for the Tactical will drop right in. If you use the rubber O-rings, you might want to deburr (if there are any burrs) around the opening in the slide where the barrel fits through.

Jason

mwcolo · February 10, 2009, 11:18 PM

Awesome. Thanks for the info!

Jason_G · February 10, 2009, 11:20 PM

No problem. If you have trouble getting a line on a factory threaded barrel, there are some aftermarket ones as well. Jarvis comes to mind. Seems like they use traditional land and groove rifling vs. the polygonal rifling of the factory barrels though.

Jason

cedjunior · February 11, 2009, 07:30 PM

Quote:

If you use the rubber O-rings, you might want to deburr (if there are any burrs) around the opening in the slide where the barrel fits through.

Take a cotton q-tip and run it along the slide opening. Cotton will get caught on a burr if there is one. More than likely no.

February 10, 2009, 10:58 PM	#1
mwcolo Junior Member Join Date: February 10, 2009 Posts: 2	H&K USP 45 Full size threaded barrel? Does anyone know if there are threaded barrels made for the H&K USP 45 full-size? I've seen the threaded Tactical barrel, and the threaded compact barrel (too short), but I don't know if the threaded Tactical would fit correctly. Thanks for any help!

February 10, 2009, 11:03 PM	#2
Jason_G Senior Member Join Date: December 18, 2006 Location: Louisiana Posts: 1,902	The one for the Tactical will drop right in. If you use the rubber O-rings, you might want to deburr (if there are any burrs) around the opening in the slide where the barrel fits through. Jason __________________ "A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed." -Amendment II, Constitution of the United States of America

February 10, 2009, 11:20 PM	#4
Jason_G Senior Member Join Date: December 18, 2006 Location: Louisiana Posts: 1,902	No problem. If you have trouble getting a line on a factory threaded barrel, there are some aftermarket ones as well. Jarvis comes to mind. Seems like they use traditional land and groove rifling vs. the polygonal rifling of the factory barrels though. Jason __________________ "A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed." -Amendment II, Constitution of the United States of America

February 10, 2009, 11:18 PM	#3
mwcolo Junior Member Join Date: February 10, 2009 Posts: 2	Awesome. Thanks for the info!