March 14, 2000, 05:20 PM | #1 |
Member
Join Date: January 22, 2000
Posts: 21
|
Can anyone give a direction to look for some casings for this? Loaded rounds?
|
March 15, 2000, 02:09 AM | #2 |
Senior Member
Join Date: November 15, 1999
Location: Clifton, Colorado USA
Posts: 724
|
Bullwhip, I believe you can find .455 Webley ammunition at the Old Western Scrounger. Click on http://www.ows-ammunition.com and search under "Centerfire Ammunition" for the .455 Webley. Hope this helps!
Steve Mace ------------------ After today, its all historical |
March 15, 2000, 11:58 PM | #3 |
Senior Member
Join Date: September 2, 1999
Location: flagstaff, arizona
Posts: 477
|
There are two 455 Webley cartridges. Fiocchi has the revolver version in amongst their speciality ammunition. The semi-automatic stuff can be made a number of ways. DKT probably has it as might Ballard. Personally I just cut down 45 Win. Mag. brass. Worked just fine.
|
March 15, 2000, 11:59 PM | #4 |
Senior Member
Join Date: September 2, 1999
Location: flagstaff, arizona
Posts: 477
|
There are two 455 Webley cartridges. Fiocchi has the revolver version in amongst their speciality ammunition. The semi-automatic stuff can be made a number of ways. DKT probably has it as might Ballard. Personally I just cut down 45 Win. Mag. brass. Worked just fine.
|
March 16, 2000, 12:00 AM | #5 |
Senior Member
Join Date: September 2, 1999
Location: flagstaff, arizona
Posts: 477
|
There are two 455 Webley cartridges. Fiocchi has the revolver version in amongst their speciality ammunition. The semi-automatic stuff can be made a number of ways. DKT probably has it as might Ballard. Personally I just cut down 45 Win. Mag. brass. Worked just fine.
|
March 16, 2000, 07:37 PM | #6 |
Senior Member
Join Date: November 28, 1999
Location: California
Posts: 3,925
|
Ken:
I am interested in re;pading for the .455 Webley automatic. Can you give afresses for DKT and Ballard? |
March 17, 2000, 02:00 PM | #7 |
Member
Join Date: January 22, 2000
Posts: 21
|
Thanks everyone!
Ken, it is a revolver. Was asking for an aquaintance that I met at the range who just got his first Webley and was sourcing equipment. Thanks! |
Thread Tools | Search this Thread |
|
|