December 29, 2012, 05:56 PM | #1 |
Member
Join Date: May 4, 2000
Posts: 27
|
choke tool
Anyone have an extra 12 gauge choke tool they don't need?
|
December 29, 2012, 06:25 PM | #2 |
Senior Member
Join Date: March 16, 2007
Location: Southern Arizona
Posts: 3,888
|
They're readily available on line. Midway or any of the gun site will have them and you can also find a big selection on Amazon.com.
|
December 29, 2012, 06:39 PM | #3 |
Senior Member
Join Date: February 23, 2005
Posts: 13,195
|
They are not universal either...specify model...etc..
But using a choke wrench in my view ...is a bad idea. If you need a wrench to get them out ...you put them in there too tight / or you're not cleaning them often enough - or maybe both. Put them in finger tight - put your finger inside them to put them in or out ....and they should run in and out smoothly....if they grab or bind at all...clean the threads inside the barrel ( toothbrush - maybe solvent - or at least Break Free) ....and lube the threads in the barrel as well as the choke ...until they spin in and out easily and freely. Put the choke wrench in your shooting box...and do not use it again !! ( I have seen way too many guys ruin barrels by cross threading choke tubes with wrenches ...because they don't clean them and they crank them down in there....)....its pretty sad when it happens. Then there are guys that don't clean their guns ...and the chokes get cemented in there....that's just plain lazy and foolish...in my opinion. |
December 30, 2012, 01:52 AM | #4 |
Senior Member
Join Date: April 16, 2009
Location: Fort Worth, Texas
Posts: 194
|
I have a Carlson's univeral you can have, pm me an address
__________________
NRA Life Member |
Thread Tools | Search this Thread |
|
|