J Stevens rifle

vmlb · January 20, 2010, 11:32 PM

I've got a 22 Long Rifle, model 1915, that needs repair. Firing pin doesn't work. Any suggestions on repair and what the value of this gun is. Fair to poor condition. Thanks.

hickstick_10 · January 21, 2010, 04:46 AM

go to http://www.gunbroker.com/ and look for closed auctions on that model of rifle.

the books by frank dehaas im almost sure cover your model of gun as far as a drawing goes.

But its a single shot, see if your firing pin tip is broken, if so make a new one, theres always a pin or a screw holding them pins in place, pull that out and out comes the firing pin.

hickstick_10 · January 21, 2010, 04:47 AM

go to http://www.gunbroker.com/ and look for closed auctions on that model of rifle. (Can we post a sticky to tell everyone how to find a rough value of there guns please?????)

the books by frank dehaas im almost sure cover your model of gun as far as a drawing goes. http://openlibrary.org/a/OL319988A/Frank_De_Haas

But its a single shot, see if your firing pin tip is broken, if so make a new one, theres always a pin or a screw holding them pins in place, pull that out and out comes the firing pin.

a crap sporry for the double post

Steven Mace · January 21, 2010, 10:36 AM

vmlb, try visiting the link below for the replacement parts you need.

http://www.wisnersinc.com/rifles/ste...shotlever.html

Steve Mace

vmlb · January 21, 2010, 12:46 PM

Thanks for all the help. Parts have been ordered. I'm going to try to repair it myself, but I will probably ruin it. I might be back when the parts come, screaming for help. Again Thank you.

January 20, 2010, 11:32 PM	#1
vmlb Junior Member Join Date: January 20, 2010 Posts: 2	J Stevens rifle I've got a 22 Long Rifle, model 1915, that needs repair. Firing pin doesn't work. Any suggestions on repair and what the value of this gun is. Fair to poor condition. Thanks.

January 21, 2010, 10:36 AM	#4
Steven Mace Senior Member Join Date: November 15, 1999 Location: Clifton, Colorado USA Posts: 724	vmlb, try visiting the link below for the replacement parts you need. http://www.wisnersinc.com/rifles/ste...shotlever.html Steve Mace __________________ After today, its all historical

January 21, 2010, 04:46 AM	#2
hickstick_10 Senior Member Join Date: August 8, 2009 Posts: 477	go to http://www.gunbroker.com/ and look for closed auctions on that model of rifle. the books by frank dehaas im almost sure cover your model of gun as far as a drawing goes. But its a single shot, see if your firing pin tip is broken, if so make a new one, theres always a pin or a screw holding them pins in place, pull that out and out comes the firing pin.

January 21, 2010, 04:47 AM	#3
hickstick_10 Senior Member Join Date: August 8, 2009 Posts: 477	go to http://www.gunbroker.com/ and look for closed auctions on that model of rifle. (Can we post a sticky to tell everyone how to find a rough value of there guns please?????) the books by frank dehaas im almost sure cover your model of gun as far as a drawing goes. http://openlibrary.org/a/OL319988A/Frank_De_Haas But its a single shot, see if your firing pin tip is broken, if so make a new one, theres always a pin or a screw holding them pins in place, pull that out and out comes the firing pin. a crap sporry for the double post

January 21, 2010, 12:46 PM	#5
vmlb Junior Member Join Date: January 20, 2010 Posts: 2	Thanks for all the help. Parts have been ordered. I'm going to try to repair it myself, but I will probably ruin it. I might be back when the parts come, screaming for help. Again Thank you.