September 6, 2012, 01:42 AM | #1 |
Senior Member
Join Date: January 15, 2012
Location: Western New York
Posts: 466
|
Need Sierra load data
Im just looking for the COL for a SGK in .224 dia 65grain.
__________________
Lock and load, the zombies (democrats) are coming (to take your guns)! |
September 6, 2012, 02:19 AM | #2 |
Senior Member
Join Date: September 29, 2008
Location: Oregon
Posts: 2,346
|
The Sierra manual lists it at the max, 2.260".
|
September 6, 2012, 09:20 AM | #3 |
Senior Member
Join Date: January 15, 2012
Location: Western New York
Posts: 466
|
thanks. i forgot to mention for .223 rem. I will use the standard length
__________________
Lock and load, the zombies (democrats) are coming (to take your guns)! |
September 6, 2012, 11:03 AM | #4 |
Senior Member
Join Date: February 14, 2008
Location: Kansas
Posts: 753
|
Email Sierra and ask question. They'll send you everything you ever wanted.
|
September 7, 2012, 02:08 AM | #5 |
Senior Member
Join Date: January 15, 2012
Location: Western New York
Posts: 466
|
tom, I called sierra to get the load data for that bullet but forgot to ask about COL.
__________________
Lock and load, the zombies (democrats) are coming (to take your guns)! |
September 8, 2012, 01:54 AM | #6 |
Senior Member
Join Date: March 12, 2006
Location: SE Wisconsin
Posts: 285
|
Just something to think about when discussing COAL. The reason it's listed in published load data to to qualify the conditions under which the data was developed. Many times it is shorter than the SAAMI COAL. It has nothing do do with how the round will function, feed and shoot in your gun. I mention this because at some point a lot of folks look a hand loading data as a recipe for producing ammunition and not as guidance in load development.
Generally, in rounds which do not need to be crimped, bullets should be seated out as far as possible without it engaging the rifling when chambered and still fitting in and feeding reliably from the magazine. This leaves maximum space in the case for powder. At this point load development should begin. COAL in rounds which need crimping is controlled, more or less, by the location of the cannelure on the bullet itself. Bruce |
|
|