|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
December 13, 2008, 11:41 PM | #1 |
Junior member
Join Date: January 5, 2005
Location: East Bay NorCal, People's Republik of Kalifornia
Posts: 5,866
|
Swiss Precision Quality Schmidt Rubin K31 Carbine
Did I make a mistake?
I just ordered one of these: I couldn't help it. At 210, plus shipping and 30 bucks FFL, if it's not a C&R, I'm buying a Swiss made, .308 caliber tack driver, I think. I went for it, thinking I haven't found any others at a better price come up in a LONG time. I like accurate guns, and, this just looked to good to pass up. Am I way off? Should I have bought a Mauser 24/47 instead, for half the price? Keep in mind I currently have 30-06, and will have a 308, one of these days... Or, the more expensive, http://www.samcoglobal.com/sm38.html ???? |
December 14, 2008, 12:21 AM | #2 |
Senior Member
Join Date: April 30, 2002
Location: The Republic of Texas
Posts: 392
|
.
You have done well Socrates. Every rifle nut should have at least one K31. The rifles are precision built and the 7.5x55 cartridge is inherently an accurate design. The K31 is basically a target rifle disguised as a service rifle. enjoy your new prize ! dxr |
December 14, 2008, 03:53 AM | #3 |
Junior member
Join Date: January 5, 2005
Location: East Bay NorCal, People's Republik of Kalifornia
Posts: 5,866
|
Is there a better, or cheaper source for such surplus rifles???
|
December 14, 2008, 11:57 AM | #4 |
Senior Member
Join Date: December 20, 2007
Posts: 295
|
They are available at on-line auctions (Gun Broker and Auction Arms), as well as various and sundry on-line estate sales. Whether or not they are cheaper from these sources is a matter of luck and timing.
It helps if you have a C&R FFL, because it cuts down on the cost and hassle of actually getting your hands on one if you win one at the auctions |
December 14, 2008, 02:16 PM | #5 |
Senior Member
Join Date: July 18, 2008
Location: Amarillo, Tx
Posts: 616
|
The cheapest K-31 I've seen was a private individual trying to sell one at a gun show. The dealers weren't giving him anything for it. I asked him what he'd like, he said $200, we dealt right there on the spot. I got a great gun (walnut) at a great price, he got some cash, we screwed a few grubbing dealers, and the gun is...um...how do I say this...off the books. As in off the government's radar. A non-gun. An all-around great deal.
Last edited by jsmaye; December 15, 2008 at 08:04 AM. Reason: Clarify the "off-the-books" statement. |
December 14, 2008, 02:32 PM | #6 |
Senior Member
Join Date: December 20, 2007
Posts: 295
|
Gunshows are another alternative and you don't need a C$R to take possession.
|
December 14, 2008, 03:21 PM | #7 |
Senior Member
Join Date: April 30, 2002
Location: The Republic of Texas
Posts: 392
|
.
Not really. I have purchased quite a few K31's and overall the best and least expensive have been from SAMCO. I always ordered their "special select walnut". The rifle in the picture above I got from them. SAMCO has the only large lot of K31 rifles in the US at this time. Most re-sellers that have them got them from SAMCO. The metal is almost invariably excellent on the K31's. The stock condition however can vary a LOT. If you care about looks, buy "special select" or spend a little extra and pry a nice one out of the hands of a collector. Socrates asked - Is there a better, or cheaper source for such surplus rifles??? . |
December 14, 2008, 07:05 PM | #8 |
Junior member
Join Date: January 5, 2005
Location: East Bay NorCal, People's Republik of Kalifornia
Posts: 5,866
|
Thanks for the great comments. I'm looking forward to having a swiss tack driver, and, since it's .308, that gives me 30-06, 7.62 X 54R, and 7.5 x 55 Swiss, which means it will be pretty easy to buy bullets.
|
December 14, 2008, 07:15 PM | #9 |
Senior Member
Join Date: December 20, 2007
Posts: 295
|
One thing, Socrates--most 7.62 x 54R rifles have a nominal bore diameter of 310.5-.312. You can use .308 bullets, but will likely experience diminished accuracy and possibly increased bore wear.
You may want to slug your bore and use bullets of a size appropriate to your results. |
December 14, 2008, 07:33 PM | #10 |
Senior Member
Join Date: July 20, 2005
Location: Indiana
Posts: 10,446
|
A couple things that might be worth your time to read
http://www.surplusrifle.com/shooting...ing1/index.asp http://www.surplusrifle.com/reviews2...wiss/index.asp 1MOA is not uncommon for these rifles when using Swiss GP11 surplus ammo and often better with Hornady or Norma. Prvi Partizan, Wolf Gold (repackaged Prvi) and FNM are not typically as accurate, but they are cheaper than Hornady or Norma and provide Boxer-Primed Brass cases. Also, If you want a really accurate Mosin, look at a Finnish M39. 1MOA or less is not uncommon with good ammo (i.e. Lapua 7.62x53R) and these rifles have .308 bores. |
December 14, 2008, 08:51 PM | #11 | |
Senior Member
Join Date: December 20, 2007
Posts: 295
|
You are right about the K31/GP11 combo.
Quote:
Have always heard that if the barrel is marked with a "D", it is .310-.312 |
|
December 15, 2008, 03:54 AM | #12 |
Senior Member
Join Date: June 7, 2008
Location: Tacoma, WA
Posts: 106
|
I did allot of research awhile back on the k31 and $200-250 seemed about average. Often, though, the good deals required shipping. I got one for $240 at Cabelas and I believe it originated from SAMCO. Also, mine has walnut but the wood is not nearly as nice as the Doctor's.
|
December 15, 2008, 08:37 AM | #13 |
Senior Member
Join Date: June 23, 2004
Location: Ohio
Posts: 5,676
|
The Swiss rifle is an incredibly fine quality surplus gun. It was a steal when they first came in and were selling relatively cheaply. I sold mine, however. I just could not fully warm up to the action and the ammo choices were pretty limited at the time. Did not shoot it a great deal. If it is your piece of cake, you can't go wrong. IF you can still get a nice one, not the raggedy ones that show up now. I more or less have stuck with the Swedish rifles as a quality surplus Mauser. Little more ammo choices too. Much nicer guns than the Mosins, whose only advantage is being dirt cheap, for a centerfire. The Swiss guns ook like they were made like fine custom guns, almost. Flawless execution of the design.
__________________
Your gun is like your nose, it is just wrong for someone else to pick it for you! |
December 15, 2008, 09:50 AM | #14 |
Junior member
Join Date: January 5, 2005
Location: East Bay NorCal, People's Republik of Kalifornia
Posts: 5,866
|
Anyone have a good place to find some 7.5 x 55 surplus ammo, either reloadable, or not?
Thanks S |
December 15, 2008, 10:51 AM | #15 |
Senior Member
Join Date: December 20, 2007
Posts: 295
|
AIM surplus
http://www.aimsurplus.com/acatalog/c..._7_5swiss.html Graf and Sons http://www.grafs.com/ammo/234 Midway http://www.midwayusa.com/browse/Brow...g=653***690*** Wideners http://www.wideners.com/itemview.cfm?dir=18|830|855 Ammunition to go http://www.ammunitiontogo.com/catalo...mo-75x55-swiss Sportsman's Guide http://www.sportsmansguide.com/net/b...spx?c=96&s=985 Ammo Man http://www.ammoman.com/index.htm Cheaper than dirt http://www.cheaperthandirt.com/ItemL...aspx?catid=605 J & G sales http://www.jgsales.com/index.php/amm...s/cPath/12_256 |
December 15, 2008, 12:08 PM | #16 |
Junior member
Join Date: May 16, 2008
Posts: 9,995
|
Thanks for that list. A few on there I did not know about.
Maybe we should get a sticky going on here with a list of C&R firearms dealers and a list of accessory providers. |
December 16, 2008, 07:40 PM | #17 |
Moderator Emeritus
Join Date: March 11, 2000
Location: Indianapolis, IN
Posts: 16,002
|
I just traded into a walnut stocked K31 to go with my Gew.96/11. Can't wait!
|
December 16, 2008, 10:15 PM | #18 | |
Senior Member
Join Date: July 20, 2005
Location: Indiana
Posts: 10,446
|
Quote:
|
|
December 17, 2008, 03:45 PM | #19 |
Senior Member
Join Date: July 3, 2008
Location: Montana
Posts: 169
|
|
December 18, 2008, 05:08 PM | #20 |
Senior Member
Join Date: December 29, 2007
Location: Arizona
Posts: 416
|
Nice rifle! Now you need a Swede to go with it.
|
December 19, 2008, 12:45 AM | #21 |
Junior Member
Join Date: March 21, 2008
Posts: 2
|
Cool Beans
The Swiss Schmidt-Rubin K31 Carbine
By David Tong The Swiss, knowing that their neutrality might put them at odds with European aggressor nations, have always been a nation of rifleman. To this day every Swiss male serves in the military, either full time or as a reservist, from age 18 to 42, and has a fully-automatic rifle in his residence should an unlikely call to arms ever occur. They have always been technical innovators in regards to weapon design, even if some of their solutions have not been adopted by any major power. The Karabiner 31 is a case in point. Messrs. Schmidt (designer of the original rifle action) and Rubin (designer of the smokeless powder cartridge it used) developed a straight-pull, bolt action rifle that the Swiss adopted as their Model 1889. It differs from the usual turn bolt action in that the motion to work the action is a straight pull backward followed by a straight push forward, rather than the up and back, forward and down motion to which the rest of the world is accustomed in its bolt guns. It does so by using a cam pin, much like that of the AR-15/M16, which imparts rotational motion and primary extraction (the initial removal by rotation of the spent cartridge case) of the bolt from its locked to an unlocked state. The stated advantage of the straight-pull system is to better allow for rapid, repeat fire from concealment or cover without exposing the rifleman's arm and position. The disadvantage of the system is its primary extraction; lacking the normal turn bolt's great rotational leverage imparted by the shooter's arm, a neglected or dirty chamber can theoretically tie up the action. However, most authorities agree that the consistency of manufacture of both rifle and ammo, along with the drilled-in care Swiss NCOs imparted to their troopers made this a non-issue. The system served through two major variants, the Model 1889, and the later Model 1911, both using the so-called "GP90" 7.5X55mm cartridge. The earliest versions used a round nosed projectile, while later versions used a spitzer bullet. Both were loaded to a maximum average pressure (MAP) of less than 40,000 c.u.p., well below the MAP of the later K31's ammunition. 7.5mm bullets for the rear-locking Model 1889 and 1911 rifles are no longer available. The K31 made its debut in the Swiss military in 1935, and along with the change in ammunition came changes to the basic rifle action as well. Earlier Schmidt-Rubin rifles featured rear locking lugs, with the majority of the bolt length behind the magazine. To accommodate the higher-powered GP11 cartridge, Swiss ordnance redesigned the bolt system to include forward locking lugs, and its concurrent repositioning of the bolt over the magazine when locked and in battery, thus shortening the action. Here are the basic specifications of the Karabiner 31: · 43.6" OAL · 25.65" barrel · 6 round detachable box magazine serial numbered to rifle · Bayonet (ideally but rarely) serialed to rifle · 582,000 produced between 1933-1958 One thing that is not commonly known is that the K31's bullets are not "7.5mm," but actually .307" (essentially 7.62mm). This simplifies reloading, since standard .308" bullets may be used. Interestingly, the Swiss have always specified non-corrosive primers in their Schmidt-Rubin ammo, which with the customary good care means that most surplus rifles will have barrels in far better shape than is the norm for a smokepole of this age. As was common practice for the day, the K31 had an open, sliding tangent type sight mounted ahead of the receiver, graduated from 100 to 1500 meters. Windage "adjustment" was achieved by drifting a unique, diagonally dovetailed front sight that was available in several sight heights for fine elevation changes. The sights were the then common inverted "V" in front, with a U-notch rear blade. Unlike rifles manufactured by the major powers, the Swiss rifles did not suffer wartime production exigencies. The quality of the manufacture was never a question, and just one look at the bolt system during field stripping will tell you why. K31s are at once both easier to strip completely, without tools, and more difficult to routinely "field strip," because of the need to line up parts correctly to ensure that the cam system operates. About the only manufacturing economy the Swiss took was the use of a beech, instead of the earlier walnut, stock and handguard. All metal parts show a very high level of finish machine work, with no rough tool marks evident even below the stock line. The trigger is your typical two-stage military type, but again due to high quality materials, heat-treatment, and proper fitting it breaks cleanly at about 5 pounds after the initial slack is taken up. Separating the barreled action from the stock shows this quality of manufacture. Both handguard and stock feature a full serial number, and the main bedding block under the receiver ring rests on a metal shim (available in several arsenal thickness') to ensure a stable platform and consistency of bedding for accuracy. As is usually the case with military bolt guns, the barrel is not free-floated. Instead, there is an inch-long contact point at the forward end of the stock, presumably not just for accuracy but also for bayonet use. Switzerland was probably the last country in Europe still using a bolt action rifle as their principal infantry weapon in the late 1950s. I have not yet taken the rifle to a rifle range for accuracy testing at measured distances. In informal shooting from the bench (and offhand), it shoots quite well using Swiss surplus GP11 cartridges. Incidentally, this is the same ammo used by individual marksmen in matches in Switzerland, a far cry from what every other nation does. Recoil is about what you'd expect a .30-06 power level round to be like, firm and not helped by the usual curved steel buttplate. I've fitted mine with a lace-up leather comb riser from Brauer Brothers, which raises my eye for a proper cheek weld, and have also purchased but not yet installed a Picatinny rail that displaces the rear sight leaf. This will enable the use of a long-eye-relief optic much like German WW I and WW II sniper rifles. At this point, I'm thinking about using the Burris 2-7X pistol scope, which will both allow for wide field of view snap shooting in our dense Oregon woods, as well as for the longer-distance precision a fixed power "Scout" scope would not be able to provide. The rifles themselves are cheap and plentiful as of this writing (2005) and are available from many sources in Shotgun News. You can expect to live with about "80%" condition of the stock furniture, but usually with an immaculate barrel and bolt. Ammo costs are not great, roughly $0.40 per round for Swiss surplus, which is Berdan primed. There are sources of Boxer cases, most notably a short production run of Hornady hunting ammo, in 165 grain BTSP guise, as well as pricey Norma brass. If you are hankering for something a bit unusual, yet practical for target shooting and hunting most North American game animals, a K31 is far from the worst choice you can make. Depending on your sense of humor, it might be a pretty good one. |
December 19, 2008, 07:33 AM | #22 |
Moderator Emeritus
Join Date: March 11, 2000
Location: Indianapolis, IN
Posts: 16,002
|
FWIW, that article is a bit incorrect in that the Schmidt-Rubin Gew.1911 does indeed fire the GP11 cartridge and not the GP90. (Hence the name.)
|
December 19, 2008, 12:28 PM | #23 |
Senior Member
Join Date: November 17, 2004
Location: San Antonio
Posts: 270
|
Also, the author calls it a Schmidt-Rubin, which it is not. I believe those two guys were long dead by the time K31s were designed...
|
December 20, 2008, 10:06 PM | #24 |
Member
Join Date: December 20, 2008
Posts: 51
|
Seems to be favorable according to this:
http://arthurshall.com/x_2007_manly_firearms.shtml |
December 21, 2008, 10:42 PM | #25 | |
Junior member
Join Date: January 5, 2005
Location: East Bay NorCal, People's Republik of Kalifornia
Posts: 5,866
|
Pretty bloody funny.
Quote:
|
|
Thread Tools | Search this Thread |
|
|