|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
September 14, 2008, 11:28 AM | #1 |
Member
Join Date: January 10, 2007
Location: Michigan
Posts: 99
|
35 Whelen load for 225 gr bullet
I would like to load 35 Whelen cartridges with a 225 grain Spitzer boattail bullet. Of the three loading manuals I have, none give any information on that combination. Would like something in the 2200-2400 fps and the powders I have on hand are IMR 4064,4320,4350 and Win. 760.
Anyone have any published data on loading that one? Thanks |
September 15, 2008, 12:11 PM | #2 |
Senior Member
Join Date: July 29, 2008
Posts: 949
|
From the Sierra Infinity/Load Data program, they show for the 35 Whelen and their 225 SPBT:
IMR4064- min 50.5 grs= 2300'ps, max 55.5 grs= 2550'ps IMR4320- min 52.1 grs= 2350'ps, max 56.1 grs= 2500'ps Their accuracy load is 54.5 grs IMR4064= 2500'ps Their hunting load is 55.5 grs IMR 4064= 2550'ps They don't show any other powders listed that you listed. You can consider 59.0 grs IMR 4350 a max load and it will be a compressed load. IMR 4350 is a little slow for the case capacity of the 06 and the 225 BT bullet. I have no info on 760 in this cartridge. |
September 17, 2008, 02:47 PM | #3 |
Senior Member
Join Date: March 28, 1999
Location: Tucson, AZ
Posts: 3,802
|
This is from the one book/one load data
W-760 220 gr. bullet. Start: 60.0 gr. 2398 FPS 37,500 C.U.P. Max: 63.0 gr. 2424 FPS 45,600 C.U.P. My thoughts are it's a bit too slow for the .35 Whelen. Data should be OK though as the 225 gr. bullet is only 5.0 gr. heavier. I think W-748 would be better though. W-748 220 gr. bullet. Start: 57.0 gr. 2494 FPS 43,000 C.U.P. Max: 58.0 gr. 2486 FPS 48,500 C.U.P.
__________________
COMPROMISE IS NOT AN OPTION! |
|
|