|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
November 7, 2004, 01:25 PM | #1 |
Member
Join Date: November 7, 2004
Location: SF Bay Area
Posts: 15
|
Gun Safe (desiccant or Eva-dry)
Hi,
I just bought a new gun safe and am looking for options to keep the moisture away from my guns. The safe is fireproof and approximately 23 cu-ft. Has anybody used one of the Eva-dry products (EDV300 or AR3100)? It sounds inexpensive and easy to use, but I want to make sure it's effective. Here's a link to a distributor since I can't find their website. http://www.agenglish.com/cordless.html EDIT: One more thing...if I end up using just the Silica Gel Desiccant, is it possible to use too much? I found a pre-packaged amount that is intended for 57 cu-ft, which is about double what my safe needs. Thanks, Pete |
November 7, 2004, 08:34 PM | #2 |
Senior Member
Join Date: November 16, 2001
Location: Indianapolis
Posts: 441
|
A very effective alternative
I have 3 gun safes of various sizes, from a pistol-size to a 6ft huge Cannon. For the last 6 or so years, I've been using Damp Rid that you can get at any WalMart, Meijer, Menards, etc. Just pour it in the provided cup and put it in your safe. About once a month, empty the water out of it, refill it with more Damp Rid, and wait another month.
A very effective dehumidifier and costs nothing compared to the alternatives.
__________________
I refuse to be a willing victim. |
November 8, 2004, 04:47 AM | #3 |
Senior Member
Join Date: June 14, 2004
Location: NY State
Posts: 6,575
|
You can't have too much silica gel. But the gel can absorb just so much water .When it is saturated put it in your oven to dry out. Some of them have a color indicator to tell you when it needs drying.Other than that you could use heat , one of those rods made for the purpose ,though I forget the name.
|
November 8, 2004, 07:52 AM | #4 |
Senior Member
Join Date: August 10, 2004
Location: Ohio
Posts: 351
|
drierite
Drierite may be cheaper in the long run.
__________________
Annie @8-) Maker of fine GSR since 1998 |
November 16, 2004, 12:42 PM | #5 |
Senior Member
Join Date: November 14, 1999
Posts: 1,573
|
Goldenrod is the name of the mini-heaters ... They barely put any heat out at all, but my safe has been in a "basement" for over two years ... not excessively damp, but it is an unfinished basement with mostly dirt floors ... and there has not been one speck of rust on any of my firearms. I figure that it costs me somewhere around $0.50 a month and there is NO maintenance required and nothing to remember to change. I DO check to see that it is slightly warm to the touch whenever I open the safe, but it seems very unlikely that such a low intensity heater element will EVER fail. I highly recommend them.
Saands |
|
|