|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
October 20, 2004, 10:30 PM | #1 |
Junior Member
Join Date: October 19, 2004
Location: South Carolina (Sucks)
Posts: 12
|
1 in 10" twist 25-06, What weight bullet?
Ruger 77 mk 2 25-06 I'm working on getting this rifle to shoot. If anyone has any preferences on what bullet weight is ideal for a 1-10" twist rate, gimme some info I'll take anything. I'm hoping the 75gr vmax will fly good out to 400 yrds, I heard another guy with the same gun had luck with this bullet. Any Pet loads?
|
October 21, 2004, 05:39 AM | #2 |
Senior Member
Join Date: November 5, 2000
Location: Wyoming
Posts: 1,761
|
Try H414. For the Hornady 75 grain V-max, the starting load is 51 grains, max is 55.
Varget is another good one-46 grains starting and 49 max. H4350 is also a good performer-54 starting and 58 max. any of these will get you to about 3650-3700 fps with a 24 inch barrel. |
October 21, 2004, 06:12 AM | #3 |
Junior Member
Join Date: October 19, 2004
Location: South Carolina (Sucks)
Posts: 12
|
Will the twist rate stabilize the 75 gr bullet Okay?
|
October 21, 2004, 06:32 AM | #4 |
Senior Member
Join Date: November 5, 2000
Location: Wyoming
Posts: 1,761
|
With a 1:10 twist, you should be good all the way up to 120 grain bullets.
|
November 11, 2004, 08:25 PM | #5 |
Junior Member
Join Date: October 19, 2004
Location: South Carolina (Sucks)
Posts: 12
|
.75 Moa
I've just got back from the range and it turns out my M77 mark 2 25-06 love the 75 gr v-max with about a max load of IMR 4350, the kicker is my loads are .060 off the lands of the rifling. I've finally reached sub moa accuracy with my 25-06!!
|
|
|