|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
December 7, 2008, 10:16 PM | #1 |
Junior Member
Join Date: December 7, 2008
Location: Florida Panhandle
Posts: 2
|
Benelli Super Nova Loading Question
I just purchased a Benelli 12 GA with 18.5' Barrel. The box says:
FPO S NOVA 3.5" GHS SLUG 18.5" C IL G IMP/SINT-PG MAG-STOP USB Everything I have read says it should be a 4+1. I tried loading and it stops at 2 shells. When I try to put in the 3rd shell it stops about half way in. I am new to shot guns so I may be doing something wrong. Any ideas? Thanks! Bob |
December 7, 2008, 10:24 PM | #2 |
Senior Member
Join Date: July 14, 2002
Location: Nashville, TN
Posts: 2,045
|
The mag tube comes stock with a plug installed to allow for hunting regulations. You must dis-assemble the magazine tube and remove the plug. Once you have done this the Nova will hold 4+1.
Chris
__________________
"Is there anyway I can write my local gun store off on my taxes as dependents?" |
December 7, 2008, 10:27 PM | #3 |
Junior Member
Join Date: December 7, 2008
Location: Florida Panhandle
Posts: 2
|
Thanks Chris! I'll do that.
Bob |
December 8, 2008, 10:17 PM | #4 |
Senior Member
Join Date: September 17, 2000
Location: Midwest
Posts: 277
|
Make sure you are careful when you remove the snap ring, that spring has a lot of tension.
My friend lost his 870 mag spring in an open field by forgetting to cover it when he removed the mag extension. |
December 8, 2008, 10:34 PM | #5 |
Senior Member
Join Date: February 28, 2008
Location: Central Arkansas
Posts: 791
|
Yeah, and don't do it with shells in the mag either...super extra built-up pressure. Man I was lucky I wasn't in the line of fire. That retainer clip can be a pain to get out.
__________________
When once a republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil. - Thomas Jefferson |
December 8, 2008, 10:40 PM | #6 |
Senior Member
Join Date: May 19, 2008
Location: Somewhere North of the Roaring 40's...Just
Posts: 275
|
If they are the design I think they are e.g. circle with section cut out off it and a small hole bout 2mm diameter at each end, circlip pliers (the ones with the ends bent 90 deg from handles) are perfect. But watch the tension on the spring. First time I did it it very nearly hurt.
__________________
It is New Zealand's role to send out its bright young men and women to help run the rest of the world. And they go, not hating the country of their birth, but loving it. From this loving base they make their mark on the world. Pro-1080 Poison and proud of it!! |
|
|