|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
May 4, 2013, 09:53 AM | #1 |
Junior Member
Join Date: May 4, 2013
Location: prattsville, ny
Posts: 5
|
need help with the bolt on my m24/47 mauser
this is my first time dissassembling a mauser bolt and i think i screwed up I accentially flipped the saftey flipper down in the fire position before unscrewing it away from the body and it would appear that ive locked it up. ANYBODY HAVE AN IDEA?
|
May 4, 2013, 11:37 AM | #2 |
Senior Member
Join Date: September 19, 2008
Posts: 4,678
|
.
Hook the bottom of the cocking piece/firing pin on a sharp/hard corner, like the edge of a jaw of a bench vise & pull the bolt body forward/away enough to engage the safety in the cocking piece's forward edge. . |
May 4, 2013, 08:32 PM | #3 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
Alternatively, if you have a vise, clamp the bottom of the cocking piece in it and pull the bolt away enough to get the safety into the middle position. Then disassemble in the normal manner.
Jim |
May 5, 2013, 09:05 PM | #4 |
Junior Member
Join Date: May 4, 2013
Location: prattsville, ny
Posts: 5
|
Got it thx fellas glad I signed onto this forum especially seeing this is my first foreign rifle
|
Tags |
bolt action rifles , mauser 48/48a yugo |
|
|