December 13, 2010, 10:26 AM | #1 |
Member
Join Date: April 15, 2009
Posts: 47
|
Don Hume Holster
Just bought a Kahr PM9. Also bought a Don Hume inside-the-waistband holster that utilizes a spring metal clip to secure the holster to the belt/pants. The PM9 fits so snugly that it's all but impossible to draw the weapon without pulling the holster out as well. Has anyone else encountered this condition?
Thanks, DJ |
December 14, 2010, 12:52 AM | #2 |
Member
Join Date: June 23, 2010
Location: Deleware
Posts: 40
|
Yes but not with a Hume. I Wrapped the gun in Wax Paper, wax side out and placed it into the holster for 3-4 days. Couple times a day I'd draw it and put it back. I guess it slightly stretched the leather, while waxing the inside of the holster.
Anyway, after a few days it was good to go. |
December 14, 2010, 08:06 AM | #3 |
Senior Member
Join Date: April 12, 2006
Location: NKY
Posts: 12,463
|
Before you wrap the gun in any thing, put it in the holster and leave it for a few days. That by itself may loosen the holster up enough for you without taking any further steps.
__________________
"He who laughs last, laughs dead." Homer Simpson |
December 14, 2010, 06:47 PM | #4 |
Senior Member
Join Date: April 3, 2006
Location: Missouri
Posts: 398
|
I agree with letting it set for a few days. I've had my 2 don humes for about 5 years and they have been great.
|
January 10, 2012, 09:32 PM | #5 |
Senior Member
Join Date: September 23, 2006
Location: Alexandria, VA
Posts: 5,210
|
I agree, let it sit in the holster for a few days. I've never done the whole wrapping the gun thing.
|
January 11, 2012, 12:21 PM | #6 |
Senior Member
Join Date: September 15, 2011
Location: Wisconsin
Posts: 235
|
At first my Don Hume for my S&W 642 would come along with the gun when I drew it. The gun fit very tight, obviously too tight. It did lossen up pretty quickly and works fine now. It's my favorite holster for the 642.
|
January 16, 2012, 12:19 PM | #7 |
Senior Member
Join Date: August 30, 2009
Location: Columbus, Ohio
Posts: 475
|
That is a common problem with most leather holsters. Don Hume makes a quality product. After some break-in, it will serve you well. Constant use is the best method of break-in.
|
January 16, 2012, 03:06 PM | #8 |
Senior Member
Join Date: August 8, 2004
Location: Alabama
Posts: 301
|
See shootingthebull's post, above. I prefer the thickness/type of plastic of a ziplock freezer bag. A typical trashbag (plastic) is often too thin to accomplish-what you're after. Take scissors and cut the ziplock into a single layer-where it still covers the entire portion of the pistol that will be inside the holster. The gallon size would make a good starting platform, when you get the scissors ready...
That's the trick, along with patience.
__________________
NRA Life Member Last edited by hikingman; January 16, 2012 at 03:11 PM. |
|
|