|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
January 5, 2013, 02:33 PM | #1 |
Member
Join Date: October 15, 2011
Location: Southwest Idaho
Posts: 89
|
changing from lyman turret to redding single stage
so i'm considering selling my lyman t2 and getting a redding single stage. the lyman is ok, but seems to have a bit of play in the ram. i'm wondering if you can buy the hornady lock n load bushing insert for the redding? if so, i think this would be an ideal set up for me...just buy the bushings for my existing dies and switch out will be a breeze. does anyone else do this with a single stage? i've read very good reviews on the hornady bushings but would like to hear some pros/cons from anyone hear that uses them. thanks guys.
|
January 5, 2013, 08:13 PM | #2 |
Senior Member
Join Date: March 23, 2012
Location: Conway, Arkansas
Posts: 1,398
|
I have the Hornady SS LNL and love it. Really don't have any cons on the LNL bushings or anything. I love them.
|
January 5, 2013, 08:40 PM | #3 |
Senior Member
Join Date: June 25, 2009
Location: Stuttgart, AR
Posts: 1,569
|
I use the bushing system in my RCBS Rock Chucker and love it. Very fast die changes. I liked it enough to buy a separate RCBS taper crimp die for 9mm. Once the sizing, expanding and crimp dies are set and locked, it takes less than 5 seconds to swap dies. Same goes for the seating die unless you change depths.
I don't know if the Redding will accept the bushing, but their web site should help.
__________________
A lack of planning on your part does not necessarily constitute an emergency on my part. |
January 5, 2013, 08:44 PM | #4 |
Senior Member
Join Date: May 3, 2009
Location: Central Texas
Posts: 3,930
|
The Lee Classic Cast now has the breech lock with the quick change bushings. It also has a better primer disposal system as well. They also have some of the breech lock bushings that have a lock ring made into it. You adjust the die. Then tighten an allen bolt. Now to change dies you push the black button give a quarter turn lift the die out.
__________________
No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you. |
|
|