|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
February 10, 2001, 04:52 PM | #1 |
Member
Join Date: February 6, 2001
Location: Illinois
Posts: 34
|
I picked up some 200 gr. 40/10mm lead bullets cheap (i.e. free). I use several V-V powders, but I have no load data for a 200 Gr. lead bullet.
I'll be loading some 40*&* and 10mm. Any medium weight load ideas? Thanks! Birch |
February 10, 2001, 10:47 PM | #2 |
Member
Join Date: January 10, 2001
Posts: 24
|
My Speer reloading manual only goes up to 180gr for 40 S&W but it shows this for 10mm .400" Dia. 200 Grain TMJ AA#9 14.0 Max 12.5 Low Blue Dot 10.0 Max 9.0 Low 2400 12.0 Max 11.0 Low AA#7 11.6 Max 10.5 Low Viht 3N37 8.3 Max 7.5 Low HS-6 9.1 Max 8.2 Low Unique 7.5 Max 6.8 Low HS-7 10.2 Max 9.2 Low 540 9.0 Max 8.1 Low Disclamer, these are from a manual and not tested by me. They use Speer bullets in the Speer manual and other bullets by other manufacturers may give different results. Take caution when using information from the internet, the person could be malicious or down right retarded and give you inaccurate and dangerous information. I am not responsable for what you do with this information. |
February 11, 2001, 01:43 PM | #3 |
Senior Member
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,324
|
Don't use 200g in the 40.
Fine for the 10.
__________________
. "all my ammo is mostly retired factory ammo" |
|
|