|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
January 21, 2010, 09:46 PM | #1 |
Senior Member
Join Date: February 1, 2008
Location: Florida
Posts: 795
|
Nickel plated shot vs Copper plated shot!
Outside of price is there any advantage to choosing one over the other?
Nickel plated shot or Copper plated shot?
__________________
If you want a vision of the future, imagine a boot stamping on a human face - forever. George Orwell |
January 21, 2010, 10:02 PM | #2 |
Junior member
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
|
Both will help protect shot from becoming deformed when fired. Nickel tends to be harder than copper as a rule.
With all of these X vs. Y threads, are you looking for things for particular purposes, or just increasing your awareness of things? |
January 21, 2010, 10:29 PM | #3 |
Senior Member
Join Date: February 1, 2008
Location: Florida
Posts: 795
|
What better way to learn things than to ask questions.
I know I annoy people on this site but where else can a go to get educated opinions on these topics?
__________________
If you want a vision of the future, imagine a boot stamping on a human face - forever. George Orwell |
January 22, 2010, 05:05 AM | #4 |
Senior Member
Join Date: June 4, 2006
Location: NE FL.......
Posts: 1,081
|
If I understand correctly the "plating" is more of a sales gimic than anything else. If you look at plated shot, after it has been down range, you can see that the "plating" is hardly more than a wash.
Of more importance is how HARD the underlying lead is. Lead that is properly chilled and has sufficent alloy content, tin/antimony or whatever, holds up better. Also important is how well the pellets are protected from the barrel and from the explosive forces of the powder as they are driven down the barrel. Buffers and good shot cups in other words. Strikes me that "plated" shot almost always is part of a overall load that employs buffers, good shot cups and hard shot. It's not the plating that matters but rather the "plated" shot is generally a indication that those other very important factors have been addressed. I think.................. |
January 22, 2010, 09:21 AM | #5 |
Junior member
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
|
No problem SD - just asking so I know which approach to try and answer those questions I have some knowledge on. Ask away....
Yes plating, in conjunction with good buffering inside the shell really helps. Typically those pellets are the "magnum" variety - that is, 5-6% antimony, making them harder than simple chilled shot. Coupled with a proper choke, they tend to hold patterns better at longer ranges than shells without all of the above. |
January 22, 2010, 11:46 AM | #6 | |
Senior Member
Join Date: August 10, 2004
Location: Plain Ol', TX
Posts: 713
|
Quote:
__________________
-A conclusion is not a destination, it's simply a convenient place to stop thinking.- -Reading a thing doesn't automatically make it so; repeating it doesn't necessarily make it any truer.- -Every Texan should be a member of the Texas State Rifle Association. |
|
January 22, 2010, 11:53 AM | #7 |
Senior Member
Join Date: January 4, 2010
Posts: 1,243
|
Dose the plating on steel shot make it safe for older guns? I would like to hunt waterfowl with my old 12g, but have been told that steel shot will ruin the barrel.
__________________
Seams like once we the people give what, at the time, seams like a reasonable inch and "they" take the unreasonable mile we can only get that mile back one inch at a time. No spelun and grammar is not my specialty. So please don't hurt my sensitive little feelings by teasing me about it. |
January 22, 2010, 12:14 PM | #8 |
Senior Member
Join Date: April 29, 2008
Posts: 177
|
I think the plating on steel shot is for corrosion resistance and offers no barrel protective qualities.
|
January 22, 2010, 12:57 PM | #9 |
Senior Member
Join Date: June 14, 2004
Location: NY State
Posts: 6,575
|
Yes the plating on steel shot prevents corrosion which can glue the shot together forming a solid mass that will damage the choke and break the barrel !!
On lead shot the plating reduces deformation therefore giving a better pattern. There is a big difference in lead and steel as far as barrel damage . NEVER use steel shot in a gun not recommended for steel shot by the manufacterer !! |
January 22, 2010, 02:04 PM | #10 |
Junior member
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
|
Many older barrels are NOT steel shot rated. They came with very tight chokes and have thinner walls. Firing steel loads can, at the least, cause your barrels to bulge; at the other extreme that may cause barrels to split or rupture.
A trip to a competent smith for proper evaluation would be in order. |
January 22, 2010, 02:32 PM | #11 |
Senior Member
Join Date: March 4, 2009
Location: Marysville, Washington
Posts: 195
|
I've heard that copper plated shot will not drag feathers into the meat, while plain lead will.
I use only copper plated when I hunt upland birds, so I don't know how true this is. |
January 22, 2010, 06:27 PM | #12 |
Junior member
Join Date: December 16, 1998
Location: Titusville, FL, USA
Posts: 1,030
|
Plating just makes the pellets pretty.
What's important is whether or not the pellets are hardened lead. Many plated pellets are not constructed of hardened lead. |
January 22, 2010, 08:46 PM | #13 |
Senior Member
Join Date: September 7, 2004
Location: SE NC
Posts: 1,239
|
The hardness of the lead alloy the pellets are made from makes more difference than plating or lack of it. Plating is one more way to help keep pellets round, and round pellets tend to fly straighter and therefore pattern better. Good wad columns that absorb some of the impact of the powder charge going off, shot cups that keep pellets from contacting the bore as they travel down the barrel, and buffering material to help keep pellets separated also help keep pellets round until they exit the muzzle. All those things are typical of 'premium' shotgun ammunition, and will usually produce better patterns.
As to copper vs. nickel- I doubt there's a lot of difference. There's not an appreciable thickness of either in place. And btw, if you want to know something, you SHOULD ask questions. It's the easiest way to learn. Probably the cheapest, too- it's expensive to make all the mistakes on your own . fwiw, lpl
__________________
Mindset - Skillset - Toolset. In that order! Attitude and skill will get you through times of no gear, better than gear will get you through times of no attitude and no skill. |
January 22, 2010, 09:04 PM | #14 | |
Senior Member
Join Date: January 4, 2010
Posts: 1,243
|
Quote:
__________________
Seams like once we the people give what, at the time, seams like a reasonable inch and "they" take the unreasonable mile we can only get that mile back one inch at a time. No spelun and grammar is not my specialty. So please don't hurt my sensitive little feelings by teasing me about it. |
|
January 22, 2010, 09:35 PM | #15 |
Staff In Memoriam
Join Date: October 13, 1999
Location: Columbia, Md, USA
Posts: 8,811
|
A couple things....
First, ask any questions you have, AFTER you've checked the archives and found little/no input. I personally would appreciate you framing your queries in a format that doesn't use vs or either/or structures. Second, plating seems to help most when used on hard, rounder pellets. I've shot some pigeon loads that were outstanding and used nickel plated shot. The big money in shotgunning is in live pigeon shooting in Europe and Mexico. Thousands of dollars can ride on each bird. The favored loads for this game tend to use plated shot and premium components throughout. Back in the days before steel, I used some copper plated 2s for geese and 4s for ducks. They worked well and may have done extra damage by penetrating better. |
January 23, 2010, 06:46 AM | #16 |
Junior member
Join Date: January 23, 2010
Posts: 121
|
steel shot is safe if your handloading and you use telfon wraps from bpi if your barrel inst choked tighter than mod.
nickel shot from bpi has the hardness,of steel because of the way the make it in particular .Nickel shot doesnt deform after entering flesh so its not good on game like turkey etc. |
Thread Tools | Search this Thread |
|
|