The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old January 9, 2009, 11:23 PM   #1
Gazzmann
Senior Member
 
Join Date: December 29, 2007
Location: South Florida
Posts: 133
45 acp load data needed

I have been using Red dot and unique with very good success.
Came across some 45 cal 230 grain LRN bullets, and have not been able to find any load data for the acp.
I would like to stay with red dot or unique if possible.
Any suggestions would be appreciated.
Thanks,
John
Gazzmann is offline  
Old January 9, 2009, 11:45 PM   #2
PCJim
Senior Member
 
Join Date: July 11, 2008
Location: FL
Posts: 570
Gazzmann, just curious which manuals you checked..... Data for both powders for that bullet type/weight is available off Alliant's website.
PCJim is offline  
Old January 10, 2009, 01:09 AM   #3
bullspotter
Senior Member
 
Join Date: November 2, 2008
Location: Montana
Posts: 308
my speer book shows 45 acp 230gr lead round nose data as

UNIQUE 5.3gr min at 764 fps and max load at 5.8gr at 849 fps.




RED DOT min load is 4.7gr at 765 fps and max at 5.1 at 844 fps.

tests were with a colt govt model with 5 inch barrel 1-16 twist with a .452 dia bullet.
bullspotter is offline  
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:47 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.02772 seconds with 8 queries