November 24, 2009, 03:18 PM | #1 |
Senior Member
Join Date: June 12, 2008
Location: The Real America
Posts: 149
|
Scale Help?
Can I use a digital kitchen scale to measure black powder? And what about converting grams to grains. The conversion chart says 50 grains = 3.24 grams. Am I missing some thing?
__________________
"Those who hammer their guns into plows will plow for those who do not." |
November 24, 2009, 04:05 PM | #2 |
Senior Member
Join Date: March 4, 2008
Location: west virginia born 1/19/1961
Posts: 222
|
just buy an adjustable powder measure,a lot cheaper and easier than a scale should be $10 or less. unless your into competion shooting a couple grains either way won't amount to anything to be conserned about.
|
November 24, 2009, 05:25 PM | #3 |
Senior Member
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,772
|
A typical kitchen scale does not have the accuracy you're looking for in weighing your powder. A good balance scale used for reloading is probably the least expensive solution - about $50.
Yes, 50 grains is 3.24 grams. |
November 24, 2009, 06:32 PM | #4 |
Senior Member
Join Date: December 28, 1999
Location: In a kornfield in kalifornia
Posts: 1,161
|
I'm in the boat that says it's best to measure by volume. No scale required, just empty rifle shells & shotgun hulls cut to proper size.
__________________
When Banjos are outlawed, only Outlaws will have Banjos The Bible is my lawbook. I turn the other cheek when applicable, and spend the rest of my days resisting evil at every front, until I have breathed my last breath. |
November 24, 2009, 06:59 PM | #5 |
Senior Member
Join Date: June 12, 2008
Location: The Real America
Posts: 149
|
I'm with you on the volume part. But can I convert weight into volume. Maybe I should just buy a powder measure!
__________________
"Those who hammer their guns into plows will plow for those who do not." |
November 24, 2009, 07:28 PM | #6 |
Senior Member
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,772
|
The easiest and cheapest solution is to buy a powder measure. There is the question about how accurate the measure is, and since grains are a measure of weight and not volume, the only way to 'calibrate' the measure is to weigh the powder from various settings. This can only be done reliably with real black powder, as it is grain for grain the same number whether measure by volume or weight. Within a couple of percent anyway. The scale used to measure the weight should be a good balance scale as mentioned above.
But, that's a lot of effort for little gain except perhaps confidence. Just buy the powder measure and go with it. |
November 24, 2009, 07:40 PM | #7 |
Senior Member
Join Date: December 20, 2008
Location: Somewhere on the Southern shore of Lake Travis, TX
Posts: 2,603
|
Look up case capacity of some popular rifle and pistol cases. This is usually given in grains of water. Since water has nearly the same density as black powder, a case that has a capacity of 50 grains of water will come very close to measuring 50 grains of black powder.
Black powder substitutes should always be measured by volume. When they say "50 grains" of Pyrodex, or 777 or Blackhorn 209, what they mean is the amount of powder measured by a black powder measure set to throw 50 grains of black powder. The actual weight of these substitutes will be considerably less because they have a lower density than black powder. For example, "100 grains" of Blackhorn 209 measured by volume actually weighs about 65 grains. |
Thread Tools | Search this Thread |
|
|