|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
February 21, 2012, 08:29 PM | #1 |
Junior Member
Join Date: February 21, 2012
Posts: 3
|
AK stocks, need a better one.
So I have had my Arsenal SGL-21 for a while, and the only thing I can complain about is that the stock is, for me, very uncomfortable. it needs to be 1-1/2in taller, or rather lower. What I mean is this.
Here is the SGL-21 (AK 103 clone) http://defenderarmsllc.com/wp-conten...6/SGL21-61.jpg An original milled AK-47 http://world.guns.ru/userfiles/image...s01/ak53_1.jpg An RPK http://world.guns.ru/userfiles/image...g15/rpk_01.jpg And finally an AKMS http://world.guns.ru/userfiles/image.../as01/akms.jpg Notice how on the SGL, the bottom of the stock, drawing a straight line to the pistol grip is about half way down, the milled, and the RPK stock bottoms are about level with the grip's rear bottom, and that the AKMS stock goes way below the pistol grip. This is what I need. Does anyone know someone that makes a stock that will fit on a stamped AK like my SGL21 that is like one of these lower positioned stocks? Synthetic Black and/or copies of an AK family stock a plus.
__________________
Guns, making problems go away since 1400 AD. |
February 21, 2012, 09:38 PM | #2 |
Senior Member
Join Date: August 28, 2008
Location: Near Fairbanks Alaska
Posts: 829
|
I can't answer your question.
Contact this guy and he can help you: http://ironwooddesigns.com/IWDHome.html |
February 23, 2012, 07:59 AM | #3 |
Senior Member
Join Date: December 14, 2011
Location: WV
Posts: 938
|
Iron wood designs is probably your best bet. I've never ordered from them (never ordered a stock either) but if I was going to it'd be from them. Their quality seems to be top notch.
|
February 25, 2012, 03:38 AM | #4 |
Member
Join Date: October 21, 2011
Location: Las Vegas, NV
Posts: 98
|
I would take a look at this one. I had it on my Romanian AK
http://www.gunstuff4you.com/product/59578 |
February 25, 2012, 10:13 AM | #5 |
Senior Member
Join Date: September 25, 2009
Posts: 267
|
Believe it or not the tapco stocks are excelent and cheap. Their forarms, at least the inteafuse I had, leave a lot to be desired but they make a poly copy of the galili folder that drops your comb some (how much?) and adds at least 2 inches to the lop, it locks solid in both open and closed positions and can be had stupid cheap in any color youd want.
|
Thread Tools | Search this Thread |
|
|