|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
October 21, 2008, 12:19 AM | #1 |
Member
Join Date: June 27, 2008
Location: the midwest
Posts: 82
|
enfield missing stripper clip guide safe?
I recently purchased a no 1 mk3 that had been heavily sporterized, including the complete removal of the stripper clip guide - I have heard that this mod may make the weapon unsafe to shoot- anyone have info, and anyone know where I could get a replacement stripper clip guide?
|
October 21, 2008, 01:22 AM | #2 |
Junior member
Join Date: September 22, 2007
Posts: 197
|
Isn't the stripper clip guide milled straight into the receiver on your SMLE? The guide on my 2A1 was removed when it was bubba'ed into a 'jungle gun' (a scope was mounted over the action).
There is a guy who mills stripper clips into various rifles, but I'm not sure if the guide is milled into an existing receiver, or if it is built up out of welding (or something) and then milled into shape. Give Shawn's Tactical a call and see if he can do anything for you. |
October 21, 2008, 01:41 AM | #3 |
Member
Join Date: June 27, 2008
Location: the midwest
Posts: 82
|
its a separate piece that is held in with pins - apparently often removed for sporterizing....
|
October 21, 2008, 02:55 PM | #4 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
Actually, the clip bridge on the No. 1 Mk III it is held by four rivets, but the rivets are finished flat and the work is so well done it looks like the bridge is part of the receiver. It is part of the receiver on the No. 4 and 5 rifles, though.
The clip bridge is not a stressed component. Not only did the early rifles not have it, but as graywalker says, it is often removed when the rifle is sporterized. Jim |
October 21, 2008, 10:37 PM | #5 |
Member
Join Date: June 27, 2008
Location: the midwest
Posts: 82
|
cool- I was hoping it was a non issue with regard to safety- still, I would love to have the guide back- anybody know where to get one out there on the web- numrich was a no go.......
|
October 22, 2008, 05:16 PM | #6 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
They were considered a permanent assembly with the receiver, not a spare part, so there are no supplies of them around. When they were removed they were usually ruined and were just tossed. Barring a stroke of luck, the best way to get a charger bridge might be to just buy a rifle with one on it.
Jim |
October 22, 2008, 06:20 PM | #7 |
Senior Member
Join Date: February 28, 2008
Location: Michigan
Posts: 2,620
|
Do a search for Lee Speed, they were the forerunners of the Enfield. There is some verry nice stuff out there. Tom F.
|
October 23, 2008, 04:35 PM | #8 |
Senior Member
Join Date: July 3, 2005
Location: Alabama
Posts: 925
|
|
October 24, 2008, 04:08 PM | #9 |
Senior Member
Join Date: October 24, 2008
Location: Central Arkansas
Posts: 437
|
there were a lot of English sportsmen that removed them to use in Africa for hunts. The trend probably came across the waters.
|
October 24, 2008, 04:16 PM | #10 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
Hi, Tidewater Kid,
Well, I'll be darned. I would not have thought there were any available. From the looks of that, it seems to be unfinished and without the clip slot fully cut, so installing it and making it work might take a fair amount of effort. Jim |
October 25, 2008, 06:49 PM | #11 |
Member
Join Date: June 27, 2008
Location: the midwest
Posts: 82
|
wow- Thanks much for that- gonna have to get me one now.....
|
October 26, 2008, 09:42 PM | #12 |
Member
Join Date: June 27, 2008
Location: the midwest
Posts: 82
|
Ordered one of the stripper guides, along with some other stuff for the old girl, now to figure out how to assemble it- any idea how they did the rivets?
|
|
|