duburring question

Kato_Guy · March 30, 2007, 07:51 PM

The lee deburring tool will not deburr the outside of the case neck on my 270wsm. I did deburr the inside but the shoulder gets in the way when trying to deburr the outside.

Is it a must to deburr the outside?

thanks
kyle

kingudaroad · March 31, 2007, 11:21 AM

I use steel wool sometimes to smooth out any sharpness on the case mouth. Just shove the case mouth into a piece of steel wool and give it a couple of twists.

Daniel BOON · April 2, 2007, 07:01 PM

I find most of my burrs on my 308 brass on the outside rim. buy a good de burr tool, and get those little boogers smoothed out.

williamd · April 2, 2007, 10:04 PM

RCBS does a nice job with the hand help or mounted deburr rig. Yep, do it.

Zippy06 · April 4, 2007, 01:55 PM

If you don't get the outside burr, it will catch, inside of the bullet seating die.

And crush the the case. At the neck.

It's real easy to do.
Leave the case in the holder. And use a flat file. Sears have a nice set of jeweler's files.
I use the lee deburring tool .223 and .308. Not sure, why it does not work on .270. ???

Kato_Guy · April 4, 2007, 06:00 PM

It doesn't work on the wsm the degree angle of the shoulder is different than the regular 270

March 30, 2007, 07:51 PM	#1
Kato_Guy Senior Member Join Date: March 26, 2006 Location: Minnesota Posts: 212	duburring question The lee deburring tool will not deburr the outside of the case neck on my 270wsm. I did deburr the inside but the shoulder gets in the way when trying to deburr the outside. Is it a must to deburr the outside? thanks kyle

April 2, 2007, 07:01 PM	#3
Daniel BOON Senior Member Join Date: June 5, 2005 Location: Henderson NV Posts: 360	where the burrs are. I find most of my burrs on my 308 brass on the outside rim. buy a good de burr tool, and get those little boogers smoothed out.

April 2, 2007, 10:04 PM	#4
williamd Senior Member Join Date: March 13, 2007 Location: SoCal Posts: 801	RCBS does a nice job with the hand help or mounted deburr rig. Yep, do it. __________________ "Outlaw guns and only outlaws will have guns!" Unfortunately, we may be moving in that direction. NRA Benefactor, Conservative!, VN '64-'65. Never sell a gun or a car ... and retire rich!

April 4, 2007, 01:55 PM	#5
Zippy06 Senior Member Join Date: January 1, 2007 Location: S.E. MI Posts: 117	If you don't get the outside burr, it will catch, inside of the bullet seating die. And crush the the case. At the neck. It's real easy to do. Leave the case in the holder. And use a flat file. Sears have a nice set of jeweler's files. I use the lee deburring tool .223 and .308. Not sure, why it does not work on .270. ??? __________________ Zippy06. U.S.N. Vet. NRA. Lee Turret(circa 1986). 9mm, .357 Mag., .40 S&W, .223 Rem., .30-30 Win., .308 Win. G17, S&W 686, G22C, Colt H-Bar, Marlin, Savage 10FP. Be safe. Be happy

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

March 31, 2007, 11:21 AM	#2
kingudaroad Senior Member Join Date: March 11, 2005 Location: austin Posts: 735	I use steel wool sometimes to smooth out any sharpness on the case mouth. Just shove the case mouth into a piece of steel wool and give it a couple of twists.

April 4, 2007, 06:00 PM	#6
Kato_Guy Senior Member Join Date: March 26, 2006 Location: Minnesota Posts: 212	It doesn't work on the wsm the degree angle of the shoulder is different than the regular 270