January 21, 2013, 10:54 PM | #26 |
Junior Member
Join Date: March 10, 2010
Posts: 7
|
I shoot a rebareled Win. Model 70 in 260 Rem. I would much rather own this than the 243 that I had before. Great bullet selection varmits, deer or targets. Moderate recoil, all day fun.
|
January 22, 2013, 05:30 AM | #27 |
Senior Member
Join Date: May 29, 2008
Location: now living in alabama
Posts: 2,433
|
No need to justify staying with the 260. If you like that chambering, then stay with it.
If you dont like the stock that is on it, get an aftermarket. You can always shorten the LOP. Since you are having problems "getting down" on the scope, some higher scope rings might be in order. If you do not care for the Matte finish on your rifle, you can spend some time on the polishing wheel and put a high polish on the metal with rubbing and then polishing compound. This takes a lot of time and one of the biggest reasons that having a rifle hot tank blued is expensive. If you do the polishing, then a smith will tank if for you for a reasonable amount. Remember, you can put as little or as much as you like into getting the rifle the way you want it.
__________________
No such thing as a stupid question. What is stupid is not asking it. |
January 22, 2013, 05:55 AM | #28 | |
Senior Member
Join Date: December 14, 2012
Location: Southern Appalachian Mtns
Posts: 1,520
|
Quote:
__________________
DEO VINDICE |
|
January 22, 2013, 10:44 AM | #29 |
Senior Member
Join Date: February 9, 2010
Posts: 147
|
Thumbhole stocks seem to fit me well, and if I don't get a Model 7, it's another option.
Concern is this: how difficult would it be to cut down a Boyd's laminated thumbhole stock? Any different than cutting down a typical wood stock, or would I ruin it? Don't know that I'd have to modify it, but am curious as the listed LOP is over 14 inches. |
January 22, 2013, 11:59 AM | #30 |
Senior Member
Join Date: June 20, 2007
Location: Rainbow City, Alabama
Posts: 7,167
|
Laminate stocks can be cut down just as easily as ordinary wooden stocks. There is a pretty good Larry Potterfield video on Youtube for how to cut down a stock and fit a recoil pad.
|
January 22, 2013, 01:39 PM | #31 |
Senior Member
Join Date: February 9, 2010
Posts: 147
|
I'll check it out, thanks for the heads up.
I have been wondering about picking up a Howa 6.5x55 barreled action and then getting a Boyd's featherweight thumbhole stock for it. I have no idea if this would require fitting. Or perhaps I might get a stainless Ruger Hawkeye Ultra-Light in 7mm-08 (once again, not available in .260) and putting a Boyd's on it if needed. |
January 22, 2013, 03:30 PM | #32 |
Senior Member
Join Date: December 14, 2012
Location: Southern Appalachian Mtns
Posts: 1,520
|
That 6.5x55 Howa sounds like a great idea. I own a Howa myself and its a great gun for the money IMO. Or in any price range for that matter. If you get a Boyds stock for it, it may require a little dremel tool work for proper fitting. I would also suggest having it glass and pillar bedded for a perfect fit and considerably better accuracy. If you dont want to tackle that yourself, expect to pay about $100 for a gunsmith to do it. It will be well worth it. That would bring your total investment to about $600. Still not a bad deal
__________________
DEO VINDICE |
January 23, 2013, 09:41 PM | #33 |
Senior Member
Join Date: July 5, 2008
Posts: 512
|
Mr. Whimsy,Have you looked at the 6.5 Creedmoor?
I like the 260 Remington,and have a DPMS LR-260.It's a great shooting rifle,but I just built a bolt action in 6.5 Creedmoor. If you don't reload,you will find 6.5 Creedmoor factory ammo easier/cheaper than 260 Remington. I handload for all of my guns,so factory ammo is never an issue. There are several gun makers that offer the 6.5 Creedmoor. |
January 24, 2013, 08:46 AM | #34 | |
Senior Member
Join Date: June 20, 2007
Location: Rainbow City, Alabama
Posts: 7,167
|
Quote:
|
|
January 24, 2013, 08:55 AM | #35 |
Senior Member
Join Date: February 9, 2010
Posts: 147
|
Thanks for your esteemed counsel on the Boyd's stock.
I did look at the 6.5 Creedmoor but didn't like having only one or two companies producing the brass. I hate when people do this, but in the midst of my .260 research I got a line on a 35 Remington Marlin 336, another gun I have been wanting. I'm afraid the .260 project might have to wait, as I am seriously tempted.... |
January 24, 2013, 06:11 PM | #36 |
Senior Member
Join Date: December 14, 2012
Location: Southern Appalachian Mtns
Posts: 1,520
|
I have a .35 rem Marlin 336. I love it and it is my "go to" for close range/brush hunting. Not sure what type of yardage you hunt but if you plan on shooting much over 100 yards your better off with the .260 idea. Not saying the .35 wont shoot past that, deer have been killed with .35's at 300 yards (not by me though) but there is a large difference in velocity and trajectory between the .35 and .260 that will really start to show past 100 yards. The .260 will serve alot better than the .35 as a "do all" hunting rifle.
BTW- the .260 rem is older, wiser and better than the 6.5 creedmore
__________________
DEO VINDICE |
December 4, 2014, 09:22 PM | #37 |
Junior Member
Join Date: September 4, 2011
Location: Florida-North O Tampa Bay Some
Posts: 2
|
I've Learned A Lot
This thread has educated me further on the virtues of the wonderful
.260 Remington caliber. I am pursuing a Savage in .260 Remington caliber myself if anyone has a basic rifle to sell.
__________________
Jack |
December 4, 2014, 11:11 PM | #38 |
Senior Member
Join Date: January 6, 2011
Location: Thornton, Texas
Posts: 3,995
|
Things have changed for me also. I sold the Ruger Compact in 260 and replaced it with a Tikka T3 Lite in Stainless. Had to get a 308 and have the barrel replaced, but I have what I want now and I really like it. And Brother...will it shoot.
As for bullets, I have decided - after use of 100 gr bullets and 120 gr bullets - that I do believe that the 120 grainer is more effective on deer. But, I have about a zillion of the 100 grainers and will continue to shoot them till I run out. Somebody in this chat, I think, mentioned that the caliber wasn't a good varmint caliber. Not true. I was having problems putting down medium sized pigs with my 220, which is why I ramped up to the 260. And varmint use is originally why I went to the 100 grain bullet. Works great on pigs and coyotes and I just shot a real nice buck that traveled about 75 feet from where I hit him. I hate myself for leaving my great old Sako 270 and the Ruger 220 in the gun safe and always taking the 260 to the woods, but I just like that Tikka 260 that much. Super accurate and now I have a Vortex Viper 4-16x50 PST ffp on it. I must be getting a rep among the woodland varmints. Had a pack of coyotes howling on the other side of the fence this evening, but not one of them crossed the darn fence. The word is out. |
December 5, 2014, 12:07 AM | #39 |
Senior Member
Join Date: October 4, 2011
Location: Australia
Posts: 318
|
Before you buy the rem 7, pick up a tikka t3 ctr - the new one. Let us know if it's any good too
|
December 5, 2014, 01:37 AM | #40 |
Senior Member
Join Date: March 23, 2008
Location: Jacksonville, FL
Posts: 2,126
|
Tikka T3 .260.
|
December 5, 2014, 06:11 AM | #41 | |
Senior Member
Join Date: May 31, 2007
Location: NC
Posts: 2,614
|
Quote:
|
|
December 5, 2014, 08:19 AM | #42 |
Senior Member
Join Date: August 1, 2010
Location: Tampa Bay
Posts: 4,556
|
Jack,
If target is the purpose for your Savage, 12 LRP is a near competition-ready rifle out of the box for about a grand- can't be beat. You can also scout the pawn shops and gun shows for a "donor action" rifle- an old hunting rifle that you can pick up cheap, strip everything from the action and custom build to suit. This one chambered in .260 Match is built off a new SS Varmint action with a Criterion barrel in an AICS.
__________________
Remington 700/Savage Rebarreling /Action Blueprinting 07 FFL /Mosin-Nagant Custom Shop/Bent Bolts Genuine Cerakote Applicator www.biggorillagunworks.com |
December 5, 2014, 12:09 PM | #43 |
Senior Member
Join Date: June 9, 2010
Location: live in a in a house when i'm not in a tent
Posts: 2,483
|
260 with 120 grain is deadly serious for antelope and deer.
I replaced my stock Savage stock with a new old stock Hogue, although the other suggestions to change rifles might be viable if you're indifferent about the Savage. I love my 260 so much that I bought some dies and I'm thinking of loading heavier 140 gr bullets when my 30-06 ammo runs out to take it elk hunting.
__________________
I'm right about the metric system 3/4 of the time. |
Thread Tools | Search this Thread |
|
|