|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
August 30, 2013, 04:19 AM | #1 |
Senior Member
Join Date: April 21, 2008
Location: new zealand
Posts: 856
|
What determines FOV in a scope?
Now I always thought that the field of view of a scope was directly related to the objective size of a scope. But I was looking at Leupold fixed powered scopes, specifically the 4x28 and the 4x33 FX series scopes and it quotes that the 4x28 has a wider FOV.
So what does contribute to the FOV of a scope? |
August 30, 2013, 07:54 AM | #2 |
Senior Member
Join Date: December 7, 2009
Location: Western New York
Posts: 2,736
|
The power of the scope is actually a rounded up or rounded down number. Who ever puts the specs out has some liberty to do that and marketing has a shot at it also in writing up all the good features of the scope so you'll buy it. If two scopes actually had exactly the same power and same lens size, they'd have the same fov. Some scopes have a "margin" added around the outside edges as sort of a finish to hide the seal between the lens and housing. This can take a little away from the fov if present.
|
August 30, 2013, 08:37 AM | #3 |
Senior Member
Join Date: September 27, 2004
Posts: 4,811
|
Several things.
Quality of the design, Diameter of thre objective lens, magnification Etc.
__________________
Allan Quatermain: “Automatic rifles. Who in God's name has automatic rifles”? Elderly Hunter: “That's dashed unsporting. Probably Belgium.” |
August 30, 2013, 10:13 AM | #4 |
Moderator Emeritus
Join Date: June 25, 2008
Location: Austin, CO
Posts: 19,578
|
You can make it a lot easier to understand by removing the complications inside a rifle scope and just considering a window in your house.
What determines the Field of View out your window? Only two things, the size of the window (objective diameter) and how far you stand from the window (eye relief). It's complicated somewhat in a scope (or telescope or microscope or camera) by the internal structures but those are the "Big 2". In a scope, they sometimes use a Field Stop so you don't see the edges. Anything that makes the image pass through a space smaller than it actually is will decrease the FoV.
__________________
Nobody plans to screw up their lives... ...they just don't plan not to. -Andy Stanley |
August 30, 2013, 10:29 AM | #5 |
Senior Member
Join Date: April 30, 2008
Location: Texas
Posts: 1,952
|
What determines FOV in a scope?
Several things, mainly:
1. The magnification; higher x = narrower FOV 2. The geometry of the lenses, their radius of curvature, thickness, etc. 3. Number of lenses and the space between them. |
August 30, 2013, 11:36 AM | #6 |
Senior Member
Join Date: August 1, 2010
Posts: 641
|
Field of view is determined by the overall design of the individual scope, especially the design of the eyepiece.
Scopes designed for shorter eye relief often have a slightly wider fov. 2 different 3-9x40s often have different fovs. A bigger objective lens does not mean a wider fov. 1-4x20s have wide fovs. A 3-9x50 does not usually have a wider fov than a 3-9x40. |
August 30, 2013, 05:08 PM | #7 | |
Senior Member
Join Date: April 21, 2008
Location: new zealand
Posts: 856
|
Quote:
How do Wide angle scopes work? I have at home an old Nikko Stirling Gold Crown 4x32 Wide Angle scope, and it looks amazing look look through, It seems like it has a huge FOV and and very little tunnel vision. The specs on a Nikko Stirling Wide Angle 4x32 says a FOV of 33.2 ft @ 100 yards, compared to the Leupolds is a huge difference. Unless its only a 3.1x magnification then they must have done something in the lenses to get it like that. |
|
August 31, 2013, 08:43 AM | #8 |
Senior Member
Join Date: September 27, 2004
Posts: 4,811
|
A telescope, or telescopic sight is in essence 2 optical systems fitted back to back.
The front part (the objective lens group) is exactly like a camera lens. It collects incoming light & manipulates it into a cone where there is a point at the end of the cone & it all comes together in a pinpoint. That pinpoint isn't perfect so its actually a very small circle. (Called the circle of least confusion) At one point in that cone is perfect focus, that's where the reticule sits inside the tube. The rear (eyepiece lens group) glass collects the image of the front group & the reticule & projects it back towards youe eye. If you design & build a wide angled front end (like a camera's wide angle lens) it collects image forming light from a wide area & bends (collimates) it into a cone, but with more bending it collects from a wider area. Here's an illustration I found showing a zoom at wide & tele settings that might help clarify the way it works. This is a camera lens, so imagine a magnifying glass added to the output end on the right hand side, to convert to a telescope.
__________________
Allan Quatermain: “Automatic rifles. Who in God's name has automatic rifles”? Elderly Hunter: “That's dashed unsporting. Probably Belgium.” Last edited by wogpotter; August 31, 2013 at 08:50 AM. |
|
|