The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Bolt, Lever, and Pump Action

Reply
 
Thread Tools Search this Thread
Old September 23, 2012, 03:16 PM   #1
Bushmaster1313
Senior Member
 
Join Date: November 22, 2008
Posts: 339
Took my 88 to the woodshed.

Bushmaster1313 is offline  
Old September 23, 2012, 05:01 PM   #2
gak
Senior Member
 
Join Date: February 28, 2005
Location: Aridzona
Posts: 2,767
Nice pic! For a second there I thought you meant it had misbehaved
gak is offline  
Old September 23, 2012, 05:10 PM   #3
603Country
Senior Member
 
Join Date: January 6, 2011
Location: Thornton, Texas
Posts: 3,993
Nice picture of a nice looking rifle. My Dad used one for years, back when I was a teenager, and seeing your rifle brings back fond memories.
603Country is offline  
Old September 23, 2012, 05:37 PM   #4
PetahW
Senior Member
 
Join Date: September 19, 2008
Posts: 4,678
And a pre-64, at that - Niiiice !


.
PetahW is offline  
Old September 23, 2012, 07:17 PM   #5
Bushmaster1313
Senior Member
 
Join Date: November 22, 2008
Posts: 339
I got this to be the centerfire for trips to the range with family and friends.

.243 is easy on the shoulder and lever operation plus magazine is easier for new shooters provided they work the lever hard enough.

Here is a wider photo:


Last edited by Bushmaster1313; September 24, 2012 at 06:25 PM.
Bushmaster1313 is offline  
Old September 25, 2012, 11:30 PM   #6
bamaranger
Senior Member
 
Join Date: October 9, 2009
Location: North Alabama
Posts: 8,262
nice

The Win M88's were lovely, sleek rifles that deserved a better reception than they got from 1960's era shooters.

Yours is a dandy.
bamaranger is offline  
Old September 26, 2012, 08:59 AM   #7
warbirdlover
Senior Member
 
Join Date: December 13, 2009
Location: central Wisconsin
Posts: 2,324
Back then I was torn between the 88 and the Rem pump. I stupidly bought the Rem pump.
warbirdlover is offline  
Old September 26, 2012, 06:49 PM   #8
gray1
Junior Member
 
Join Date: March 30, 2007
Posts: 5
That was'nt stupid.

Back then I was torn between the 88 and the Rem pump. I stupidly bought the Rem pump.
I like 88's but if i had to choose between that and a rem pump I'd go with the later.
gray1 is offline  
Old September 26, 2012, 09:43 PM   #9
Bushmaster1313
Senior Member
 
Join Date: November 22, 2008
Posts: 339
I thought about getting a Remington 760, but since I shoot left hand the 88 is better for me
Bushmaster1313 is offline  
Old September 29, 2012, 01:58 AM   #10
bamaranger
Senior Member
 
Join Date: October 9, 2009
Location: North Alabama
Posts: 8,262
grand dad

Glad my Grand dad picked an 88.
bamaranger is offline  
Old September 29, 2012, 09:31 PM   #11
Bushmaster1313
Senior Member
 
Join Date: November 22, 2008
Posts: 339
Quote:
Glad my Grand dad picked an 88.
Can we see it?
Bushmaster1313 is offline  
Old October 25, 2012, 05:52 AM   #12
Bushmaster1313
Senior Member
 
Join Date: November 22, 2008
Posts: 339
Got good results off a bag at the range:



100 yards with Federal 80 gr. soft point

Last edited by Bushmaster1313; October 25, 2012 at 08:02 PM.
Bushmaster1313 is offline  
Old October 25, 2012, 08:44 AM   #13
BLUETIP
Senior Member
 
Join Date: September 30, 2012
Location: tennessee
Posts: 119
Very decent group, no pre 64s but, i've owned at least 7 win. Lever guns and was hard pressed to come close at 100 yrds. Although most were handgun cal. Nice shootin'
BLUETIP is offline  
Old October 26, 2012, 08:05 AM   #14
COSteve
Senior Member
 
Join Date: September 6, 2009
Posts: 1,344
That's a real beauty you got there. After a 20+ year search for a good one at a decent price, I recently found this nice 1959 model 88 in .308. I got it from a widow for a really good price with beautiful wood but the best part is that it was unfired. She gave it to her hubby for Christmas that year and he put in the safe promising to "get it set up for elk hunting some day" but never got around to it. Factory installed recoil pad was an option back then.



I added a cobra sling, Redfield base, rings, and Revolution 3-9x40 scope for that period correct look but also acceding to my 65 year old eyesight. As you can tell, I'm not a good photographer so I really need a better picture of it to show it off better.



Mine too groups very well even though my astigmatism cases me to horizontally string a bit. This are my final sight in groups at 100 yds after I set it up initially at 50yds. The Revolution scope has a BDC that you zero at 200yds for aim points at 200, 300, 400, and 500yds, hence the 1.8" high group at 100yds.


Last edited by COSteve; October 26, 2012 at 08:33 AM.
COSteve is offline  
Old October 26, 2012, 10:24 AM   #15
Keg
Senior Member
 
Join Date: February 13, 2011
Location: Freestone County, Texas
Posts: 1,133
Quote:
Factory installed recoil pad was an option back then.
Really? I have never seen one with a factory pad......
__________________
Hog Hunters never die........They just reload.........
Keg is offline  
Old October 26, 2012, 04:19 PM   #16
Bushmaster1313
Senior Member
 
Join Date: November 22, 2008
Posts: 339
Quote:
Mine too groups very well
I am delighted you found an unfired 88 and more delighted that you did not leave it unfired
Bushmaster1313 is offline  
Old October 27, 2012, 02:56 PM   #17
Keg
Senior Member
 
Join Date: February 13, 2011
Location: Freestone County, Texas
Posts: 1,133
Quote:
The Winchester model 88 rifles were manufactured without recoil pads. They would have had recoil pads installed later especially in the 308 Winchester. They did not come from the factory with a recoil pad and this does hurt the gun considerably for its collecting value. That was probably one of the main issues with those firearms.
I ran across this info on the net....Factory red recoil pads were added on early 1900..pre 64 rifles..as a factory option..not on 88's....U could buy them from Brownells and have it added by a gunsmith....
__________________
Hog Hunters never die........They just reload.........
Keg is offline  
Old October 27, 2012, 04:25 PM   #18
hornetguy
Senior Member
 
Join Date: January 14, 2011
Location: on the north side of DFW
Posts: 970
Both of those 88's are just gorgeous... and those are some impressive groups...
I had an 88 in .243 for a year or so... just couldn't like the caliber at that point in my life, so I traded it off. If it had been a .308, I'd still have it.
__________________
I always felt that if I got to the point where I thought it was time to bury my firearms, it was actually time to pick them up..
hornetguy is offline  
Old October 31, 2012, 01:15 PM   #19
COSteve
Senior Member
 
Join Date: September 6, 2009
Posts: 1,344
Quote:
The Winchester model 88 rifles were manufactured without recoil pads. They would have had recoil pads installed later especially in the 308 Winchester. They did not come from the factory with a recoil pad and this does hurt the gun considerably for its collecting value. That was probably one of the main issues with those firearms.
Quote:
I ran across this info on the net....Factory red recoil pads were added on early 1900..pre 64 rifles..as a factory option..not on 88's....U could buy them from Brownells and have it added by a gunsmith....
__________________
Hog Hunters never die........They just reload.........
I've seen that posted on the internet myself, however, back in 1962 my dad ordered himself a brand new Winchester Model 70 in 30-06 through a gunshop directly from Winchester with a factory installed Winchester recoil pad on it. I was with him in the gunshop as a 15yr old boy when the gunshop owner called Winchester to find out the price for one like he wanted and make the order. Winchester said that they could install one in their custom shop after it was manufactured but that it would slow down the delivery. My dad didn't care because he wanted it installed by the factory and so that was the way it was ordered, delivered to the gunshop, and sold to my dad. He was an engineer and he wanted things exactly the way he wanted them so many times that meant he special ordered them. For example, he never bought a car off of the lot but rather would place an order and wait the 8-9 weeks for the car to be produced and delivered.

There you have it, not hearsay or internet info of dubious heritage, but rather first hand personal knowledge of the deal.

Everyone forgets that back then, Winchester and most other gun manufacturers had custom shops where they would make firearms to a customer's specifications. Winchester leverguns were offered with many, many options even back in the 1800's. The widow I bought my 88 from told me that she custom ordered from Winchester with the recoil pad installed for her husband for Christmas, 1959. He opened the box, admired the rifle, and then put it in the safe where it sat until his passing this year. I believe she told me the truth.

Besides, I don't care about its collector value; I've already reduced that by firing it. I care that it is a pristine example of American firearm design. The lines, the feel, and heft of it to my shoulder is all I'm concerned with. That it is more accurate than I would have expected is a plus for me.
COSteve is offline  
Old October 31, 2012, 03:20 PM   #20
hooligan1
Senior Member
 
Join Date: July 18, 2010
Location: Independence Missouri
Posts: 4,582
Fellas, no foolin, those are the two prettiest 88's I've ever seen....

Congrats.
__________________
Keep your Axe sharp and your powder dry.
hooligan1 is offline  
Old October 31, 2012, 08:23 PM   #21
Keg
Senior Member
 
Join Date: February 13, 2011
Location: Freestone County, Texas
Posts: 1,133
http://gator603-linthin4-primary.hgs...ester-model-88

COSteve....Your 88 is the only 88 I have ever seen with a winchester pad ..that was said was factory....I have bought several of these guns thru the years and looked at many....I'm not interested in argueing....The site above is where I got the info....
__________________
Hog Hunters never die........They just reload.........

Last edited by Keg; November 1, 2012 at 02:27 AM.
Keg is offline  
Old October 31, 2012, 11:06 PM   #22
bamaranger
Senior Member
 
Join Date: October 9, 2009
Location: North Alabama
Posts: 8,262
maybe

I'll work on pics on Pap's rifle. It is not really pretty. It was my sole highpower for about 20 years, after my Dad hunted it, and after Pap carried it a few seasons. But it is not abused....and it is much loved. I have the shipping box dated 1956.

I've posted a story before about being a kid at "deer camp"...in his dining room w/ kerosene lantern and that rifle.

Wears the same 70's era Bushnell that my Dad put on it for me at age 14. With it I likely made the longest shot on a whitetail I ever will, not exceptional at 225 paced, but long for the way I hunt. It has killed deer in 3 states.

It will shoot. Factory WW 150 Power Points did well, as did my reloads with 150 Sierra Pro Hunters. Maybe bamaboy can help with pics.
bamaranger is offline  
Old November 1, 2012, 05:56 PM   #23
dgludwig
Senior Member
 
Join Date: February 12, 2005
Location: North central Ohio
Posts: 7,486
Quote:
COSteve....Your 88 is the only 88 I have ever seen with a winchester pad ..that was said was factory....
Without factory verification or some other type of provenance, I have to agree that a recoil pad installed on any Model 88 rifle (or Model 100 for that matter) is an after-market proposition.
I will say that the the stock on COSteve's rifle has some of the nicest wood that I've ever seen on a factory Model 88-and I've seen more than a few.
__________________
ONLY AN ARMED PEOPLE CAN BE TRULY FREE ; ONLY AN UNARMED PEOPLE CAN EVER BE ENSLAVED
...Aristotle
NRA Benefactor Life Member
dgludwig is offline  
Old November 1, 2012, 09:36 PM   #24
George4376
Junior Member
 
Join Date: February 19, 2012
Posts: 14
A friend of mine had a pre64 Mod.88 Win.in .308 and I was surprised at the 3- shot groups he would get with the rifle at 100 yrds. It is a shame that they are no longer produced, they deserved a better fate.They just didn't sell vey well.
George4376 is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:44 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.07569 seconds with 10 queries