The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Reply
 
Thread Tools Search this Thread
Old May 15, 2012, 02:34 PM   #1
Brickharbor
Junior Member
 
Join Date: May 15, 2012
Posts: 5
Colt 1851 help

Hello, I was wondering if anyone on here could help me out on a gun I have recently found.

I've had a specialist view it and he said it was in fairly good condition, all original parts and a legit peice.

It's a colt revolver in the origional wooden box.

Its an 1851 model with the London address on the top, it also has 'JFB' engraved onto the handle. I've researched my family tree but there's no one with those initials.

Serial numbers 1622 so I believe it was made in 1855?

Unfortunately as I'm posting on my phone I cannot upload photos.

A dealer thinks its a special order gun, it's got the 7 and a half inch barrell and English proofs on the chamber. There's a kind of floral engraving over parts of the gun but no scene on the barrell.

A dealer also believes it was used in the Crimean war

It also has colts patent engraved on the left hand side of the gun.

I've spoken to a few dealers and there valuations are from £500 - £4000

Could anyone help me out please?
Brickharbor is offline  
Old May 15, 2012, 03:01 PM   #2
Bill DeShivs
Senior Member
 
Join Date: April 7, 2006
Posts: 10,966
Not without pictures.
Colt will sell you a provenance letter.
__________________
Bill DeShivs, Master Cutler
www.billdeshivs.com
Bill DeShivs is offline  
Old May 15, 2012, 06:49 PM   #3
Brickharbor
Junior Member
 
Join Date: May 15, 2012
Posts: 5
http://t.co/UupbJLbO http://t.co/94AEIWMh http://t.co/X3Qg5DK3 managed to add some photos to a friends twitter. Hopefully the links work.
Brickharbor is offline  
Old May 15, 2012, 06:54 PM   #4
Dfariswheel
Senior Member
 
Join Date: May 4, 2001
Posts: 7,477
As above, your best source of verifiable information is to buy an Archive letter from Colt.

This framable letter will state in what form it left the factory as in caliber, finish, barrel length, etc, any non-standard or custom features, when it was shipped, how many were in that shipment, and WHO it was shipped to.

http://www.coltsmfg.com/CustomerServ...eServices.aspx

Note that Colt may not have any records on some guns due to the big Colt fire during the Civil War.
Dfariswheel is offline  
Old May 15, 2012, 07:00 PM   #5
Brickharbor
Junior Member
 
Join Date: May 15, 2012
Posts: 5
Thank you, looks like the records for my gun aren't available

Last edited by Brickharbor; May 15, 2012 at 07:06 PM.
Brickharbor is offline  
Old May 15, 2012, 11:08 PM   #6
RJay
Senior Member
 
Join Date: November 2, 2005
Location: Arizona
Posts: 1,936
If every thing is as it's supposed to be, 10 to 12 thousand here in the states. { stole that info from Jack404}
__________________
Ron James
RJay is offline  
Old May 16, 2012, 09:14 AM   #7
Brickharbor
Junior Member
 
Join Date: May 15, 2012
Posts: 5
Haha I saw that post!
Brickharbor is offline  
Old May 16, 2012, 02:17 PM   #8
James K
Member In Memoriam
 
Join Date: March 17, 1999
Posts: 24,383
Does Colt have any of the London records? I understood they did not, but have had no need to inquire.

Jim
James K is offline  
Old May 16, 2012, 02:40 PM   #9
Brickharbor
Junior Member
 
Join Date: May 15, 2012
Posts: 5
I've been told they don't.
Brickharbor is offline  
Old May 17, 2012, 01:58 PM   #10
PetahW
Senior Member
 
Join Date: September 19, 2008
Posts: 4,678
Very nice - You have a First Model Colt London Navy.

The component parts for the early Colt Hartford-London Navies were manufactured in Hartford with the parts being shipped to London where they were assembled and finished at Colt's London factory.
The First Model London Navies are found in the serial range of 1 through to 2000 with brass back-strap and small rounded trigger-guard. A few will also be found with a brass square-back trigger-guard and are considered a rarity.
Many of the First Model revolvers have the barrel address of ‘ADDRESS SAM'L COLT NEW-YORK CITY’ with a dash at either end. They are interspersed with ‘ADDRESS. COL COLT. LONDON’

I like the checkered grips.

I'd also like to see the "wooden box" - since it could double the value of the gun.



The large hole in the LH side of the cylinder frame looks like the upper mounting stud(s ?) for a detachable buttstock have been removed (there should have been a 2nd stud on the RH side & a notch in the bottom of the gripframe) - is there a buttstock extant somewhere ?





You're gonna want to look over this link to London Colt's thoroughly: http://www.coltcollectors.com/models/04-5b-063.shtml

.

Last edited by PetahW; May 17, 2012 at 02:18 PM.
PetahW is offline  
Old May 17, 2012, 02:19 PM   #11
DFrame
Senior Member
 
Join Date: March 7, 2008
Location: central Illinois
Posts: 451
Your gun does not appear to have the relief cuts to the lower recoil shield that would be required for a butt stock. I don't believe it had one. The large hole seems to be for the Hammer pivot pin. Is it missing?
__________________
Mark Lane to William Buckley: "Have you ever referred to Jessee Jackson as an ignoramus?"
Buckley: "If I didn't, I should have"
DFrame is offline  
Old May 18, 2012, 02:51 PM   #12
James K
Member In Memoriam
 
Join Date: March 17, 1999
Posts: 24,383
The "large hole" is the result of the head being broken off the hammer screw. It is easily fixed using a repro screw, but getting the old one out may get tricky. The point is moot, though, since Brickharbor reports on another site that he has sold the gun.

Jim
James K is offline  
Reply

Tags
1851 , antique , colt , colt 1851 , revolver

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:55 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.07615 seconds with 10 queries