The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old February 22, 2002, 02:23 PM   #1
JohnK
Senior Member
 
Join Date: May 12, 2001
Location: Duvall, Wa
Posts: 552
Any loader other than the SD not use standard dies?

The question gets asked here quite often 'will X die work in Y loader'. Other than the Dillon Square Deal does any other loader NOT use standard dies?
__________________
John

http://www.handloads.com
Molan Labe!
JohnK is offline  
Old February 22, 2002, 03:00 PM   #2
Steve Smith
Senior Member
 
Join Date: December 9, 1999
Posts: 4,131
Lyman All-American, Tru-Line, or Tru-Line Jr. In fact, all the old Lymans, I think.
__________________
Favor the X.


Steve Smith
NRA Life Member
Steve Smith is offline  
Old February 22, 2002, 04:44 PM   #3
Joe Gulish
Member
 
Join Date: March 15, 2001
Location: Cleveland, Ohio
Posts: 49
Only if you plan on reloading 50MBG. That takes special dies and press. Thats the only other one that I can think of.
Joe Gulish is offline  
Old February 23, 2002, 09:31 PM   #4
Chris McDermott
Senior Member
 
Join Date: March 30, 2000
Posts: 245
Didn't Lyman also make one of the old "tong" or plier style tools that took an interchangeable small sizing die?
Chris McDermott is offline  
Old February 24, 2002, 07:44 PM   #5
bdhawk
Junior member
 
Join Date: December 22, 2000
Posts: 114
lyman 310 tool

chris
i think you are right. i think the lyman 310 tool used spedial dies.
bdhawk is offline  
Old February 24, 2002, 08:30 PM   #6
Dan Morris
Senior Member
 
Join Date: March 7, 2001
Location: Littleton, Colorado
Posts: 342
Beware on old lyman preses v/s newer dies and shell holders... bought a couple and had to scrap them........let the buyer beware........
Dan
Dan Morris is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:30 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07280 seconds with 9 queries