The Firing Line Forums
Go Back   The Firing Line Forums > The Conference Center > S.W.A.T. Magazine

Reply
 
Thread Tools
Old February 9, 2002, 12:57 PM   #1
Dean Speir
Senior Member
 
Join Date: September 14, 2000
Posts: 155
A Page from the Petersen's Playbook?

Hi, Denny…

Nice to catch up with you at SHOT, and get a couple of comp'd issues of SWAT.

I very much enjoyed them, especially Harry Humphries piece on Hollywood tech advisors (see, there is someone other than Dale Dye!) and Patty Rogers' primer on how to approach a gunfighting school.

I must say, however, that I had a certain sense of dread when I saw that one blurb on the March cover:

Ruger Mini-14 Vs. AR-15:
And The Winner Is...


And sadly, my worst fears were confirmed when I read the article and got to the concluding paragraph, which could just as well have been lifted from one of Jan Libourel's old "Big Shoot-out… (9mm v. .45/DA v. SA/Revolver v. Semi-auto/or fill in the blank)! Which is best for you?" articles upon which the editorial content of Petersen's Handguns and G&A has been predicated for several decades.

Please tell me that this was an article that you had "in inventory" from the previous regime. This type of "kissing your sister" content, would, I hope, be beneath the dignity of what SWAT is presently striving for.
__________________
Dean, jus' visiting from The Gun Zone
Dean Speir is offline   Reply With Quote
Old February 9, 2002, 01:18 PM   #2
Denny Hansen
Staff
 
Join Date: June 29, 2001
Location: Prescott Valley, AZ
Posts: 2,357
Dean-
It was a pleasure to see you again. It had been a long time.

To answer your question, no this was not an older inventory article. As a matter of fact it came directly from a reader's request--from this Forum no less!

While writing the article, I attempted to point out differences between the two rifles in regard to cost, ergonomics etc. Overall, the article has had a very favorable response. I did state that my personal preference was for the AR, while an instructor who is known nationally prefers the Mini (yes, you know him). After all is said and done it still comes down to what different people like--and that's why both Ford and Chevrolet continue to make cars
__________________
S.W.A.T. Magazine
Weapons, Training and Tactics for the Real World
Join us at TFL or at AR15.com or on Facebook
Denny Hansen is offline   Reply With Quote
Old February 9, 2002, 02:26 PM   #3
Pat Rogers
Senior Member
 
Join Date: July 31, 2001
Posts: 303
Mini et al

Denny, Dean,

Just got to see the March issue via the B&N (BTW Dean, there are two (2) articles by yours truly in there- didn't you like the Strider article??).

The Mini is an interesting gun. Having carried one for a while as a cop, i was never crazy about it. I disliked the original sights (why a target type disc on a gun like that?) though as Dean has proven, the AO sight solves that deficiency neatly. The mechanical safety is 1930's stuff, and while that may have been high end then, the non ergonomic placement is inconvenient at best, and flat out dangerous at worst.
While the Gunsite doctrine quotes Rule #4 as- "Keep your finger off of the trigger until your sights are on the target", the Marine Corps states "...finger straight and out of the trigger guard...."

I have seen ND's occur because the shooter had his finger in the trigger guard, manipulating the mecahanical safety improperly no doubt, but the fact that the mechanical safety is inside the trigger guard is, along with the target disc type sight, and indicator that many who build guns don't have a clue on what proper use is.

Another dislike is as Denny pointed out, the magazines. While they are a problem with the AR series as well, there are several million around for that system. And, the Mini is the only rifle i have seen where you can actually jam the magazine in the well while attempting to remove it.

Denny, i understand what you said about the difference in LOS/LOB (we teach that as offset), but that is a training issue, no more nor less (you should take a gander at our standards for time and accuracy- oops, you will, as soon as i finish the SOTG article!-i'll also show you the Chambered Round Verification for the AR).

The big issue is that to the best of my knowledge, we have never had a Mini finish a 5 day course at Gunsite. Most of that may be that we just don't get many out there. Another is the ergonomics don't allow for an average shooter to keep up with the class (average being the operative word here). The last is reliability.
Last year we had a crew doing a series on the Outdoor Channel. The female part of the crew was given a Mini by a sponser for use during the class.
We suggested she bring two. Both were Tango Uniform by Thursday noon, and she finished it up with my M4.

Now, i have a Mini (don't faint here Dean), simply because i got it used (very used) and therefore did not have to expend any major currency for it (nor did i help fill rugers coffers). Knocking the bbl back increased accuracy slightly (it is now almost as tight as your mini Dean!), and replaced the ludicrous disc with an AO.
I have some ruger mags, and it works well for what i need it for (which is demonstrating techniques to those who show up with one.

I woudn't feel underamed with a mini as a cops patrol carbine, any more than i would feel underamed with a M10 .38 Special.

But i would feel very mis armed in the military or CQB mission with one.

I'll stick to my M4A1, or one of the clones for serious stuff.

Now Dean, go back and re- read the magazine...let me know how you like the Strider article.
__________________
S/F

Pat sends
www.eagtactical.com

Last edited by Pat Rogers; February 9, 2002 at 08:03 PM.
Pat Rogers is offline   Reply With Quote
Old February 20, 2002, 08:17 AM   #4
TimWilson
Member
 
Join Date: February 26, 2001
Location: Michigan
Posts: 65
Quote:
Now Dean, go back and re- read the magazine...let me know how you like the Strider article.

Unlike what he expects of others, he has a problem with his critical reading skills.
Quote:
After all is said and done it still comes down to what different people like...
That is too rational an argument for him to accept.
__________________
If I ever start to sound "politically correct", please apply a 2x4 to the side of my head.

Last edited by TimWilson; February 20, 2002 at 09:42 AM.
TimWilson is offline   Reply With Quote
Old February 20, 2002, 08:43 AM   #5
Rich Lucibella
Staff
 
Join Date: October 6, 1998
Location: South Florida
Posts: 10,156
Tim-
You have mail.
Rich
__________________
S.W.A.T. Magazine
Weapons, Training and Tactics for the Real World
Join us at TFL or at AR15.com or on Facebook

Last edited by Rich Lucibella; February 20, 2002 at 09:33 AM.
Rich Lucibella is offline   Reply With Quote
Old February 21, 2002, 10:07 AM   #6
TEXAS LAWMAN
Senior Member
 
Join Date: August 27, 1999
Posts: 304
My Mini-14 is utterly reliable

Although my stainless Mini-14 Ranch does not have thousands of rounds thru it (yet), it has proven utterly reliable with the factory 5-round mag and the ten PMI 30-rounders (both blue & stainless) I use. I qualify with the rifle twice per year at distances of up to 100 yards (open sight) and plink with it occasionally. Yes, I wish I had a pre-ban AR15 w/bayo lug, flash hider, collapsable stock, etc.--but I don't. Maybe I obtain one when some widow calls me to come appraise & bid on her recently-departed husband's firearms collection.
TEXAS LAWMAN is offline   Reply With Quote
Old February 21, 2002, 10:33 AM   #7
KSFreeman
Senior Member
 
Join Date: June 9, 2001
Location: Lafayette, Indiana--American-occupied America
Posts: 5,416
Dean, relax. Yeah, O.K., the Mini vs. AR article was silly, however the purpose of a magazine is to make money (most of the gun industry does not know this). Thus you "have" to have articles like this because that is what readers expect at least to build a base.

Further, this article as I understand it came from a reader's suggestion. What a great way to connect with the reader. Word of mouth is still the best promotion, ErrorNet be darned.

I did not read THE Pat Rogers article on the knife. I saw the squiddy doc with the knife and flipped on by. Not my cup of tea, but lots of people who like guns also like knives. You have to attract a broad base. Within that range some things will be silly to you, but not to others. That's O.K., it's the market (and editors) at work.
KSFreeman is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 03:08 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Page generated in 0.10143 seconds with 9 queries