![]() |
|
|
#1 |
|
Member
Join Date: October 18, 2000
Posts: 23
|
Sticky pump action
I bought a used Savage model 69RXL 2 years ago 90% condition.
I cleaned & oiled every parts that needed oil. But the pump action is still "sticky" even though it's clean. I don't want to remove the sideplate w/o asking for advice if I need to do it. Can anybody give me suggestions. Thanks !
__________________
"bullets beat black belts from 25 yards" |
|
|
|
|
#2 |
|
Staff In Memoriam
Join Date: October 14, 1999
Location: Columbia, Md, USA
Posts: 8,831
|
Post this on the Smithy and Harley's forums, those guys know how to T/D this and many other guns.
|
|
|
|
|
#3 |
|
Staff Alumnus
Join Date: May 2, 1999
Location: South Carolina
Posts: 3,575
|
And away we go!
__________________
http://www.scfirearms.org/ |
|
|
|
|
#4 |
|
Staff
Join Date: March 17, 1999
Posts: 16,611
|
Other than stripping down the gun and cleaning every part, you might try to find an auto shop or transmission shop that has a sonic cleaning bath. Remove the wood parts, and dunk the gun. That should clean everything. If it still is sticky, you will have to strip it or have it checked by a gunsmith (I recommend the latter).
Jim
__________________
Jim K |
|
|
![]() |
| Thread Tools | |
|
|