The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old December 16, 2001, 02:09 PM   #1
J.T.King
Senior Member
 
Join Date: March 8, 2000
Location: SoCal
Posts: 345
What tools for dies on a progressive?

Hey guys!

So after futzing with my 5 station XL650, I am having a tough time making wrenches/pliers/visegrips, etc, fitting in the cramped space in order to adjust the dies and lock down the lock rings without gouging the heck out of my locking rings.

Made me wonder, is ther an easier way or is this just always a PITA?

So the question is:

What type of tool do you use to adjust and tighten down your dies? Crescent wrench, open-end wrench, all-in-one-tool, self-adjusting pliers, pipe pliers, vise-grip, something else?

JT
J.T.King is offline  
Old December 16, 2001, 03:29 PM   #2
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 11,385
The Dillon Bench Wrench does better than regular hardware but is still not great. I wonder if you could get a real deep socket that would go over the whole die body.
Jim Watson is online now  
Old December 16, 2001, 04:44 PM   #3
Steve Smith
Senior Member
 
Join Date: December 9, 1999
Posts: 4,131
One thing that has helped me is a Vise-Grip Crescent wrench. You run the crescent down to a snug fit, then squeeze the handles for a better fit.
__________________
Favor the X.


Steve Smith
NRA Life Member
Steve Smith is offline  
Old December 16, 2001, 06:59 PM   #4
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,270
%^*&^#^&*%()^$%($)&*^^#^)*THING!

Deep sockets, slip-jaw pliers, moaning and bitching...........
__________________
.
"all my ammo is mostly retired factory ammo"
WESHOOT2 is offline  
Old December 16, 2001, 08:29 PM   #5
renaissance7697
Senior Member
 
Join Date: January 14, 2001
Location: Alexandria, VA
Posts: 203
The Answer!

I had the same problem with my PiggyBack II from RCBS.
I called their Customer Service and they sent me a special
tool that they have.
It is sort of like a Spark Plug Wrench
Deep and thin walled.
With a lever hinged into the top
So you can crank it.
It works PERFECTLY......

Gratis - Zip - Nada !

Green rules over Blue (at least in this case)
__________________
An Armed Society,
Is a Polite Society.
renaissance7697 is offline  
Old December 16, 2001, 10:30 PM   #6
J.T.King
Senior Member
 
Join Date: March 8, 2000
Location: SoCal
Posts: 345
Nice!

I assume since these dies are a lthe same size that the RCBS tool will fit my lee and dillon dies?

I think I shall be contacting them green boys!

JT
J.T.King is offline  
Old December 17, 2001, 09:27 PM   #7
JerryM
Senior Member
 
Join Date: April 4, 1999
Location: New Mexico
Posts: 1,884
That's the reason that I stopped using Dillon seating dies. I use any brand which has an insert which adjusts the seating depth. The dillons were just too much trouble. I would like to have one of the special wrenches that RCBS sent renaissance7697.
Jerry
__________________
Ecclesiastes 12:13 *┬ÂLet us hear the conclusion of the whole matter: Fear God, and keep his commandments: for this is the whole duty of man.
14 *For God shall bring every work into judgment, with every secret thing, whether it be good, or whether it be evil.
JerryM is offline  
Old December 18, 2001, 09:27 AM   #8
dick w. holliday
Senior Member
 
Join Date: January 13, 2001
Location: NC
Posts: 589
i got one of the RCBS wrenches the other day and was initially dissappointed with it because dies are so close together that is a set screw or something was sticking out that it would not go down completely----However now i've found that if you can get it cocked over one side or the other it works good....Dick
dick w. holliday is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:34 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08367 seconds with 9 queries