The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old July 12, 2001, 01:19 AM   #1
chiz45
Senior Member
 
Join Date: April 27, 2000
Location: Las Vegas, NV
Posts: 197
Newbie Question on Powder

My cousin has given up reloading, and i have inherited all of his equipment. I believe most if not all of it is RCBS. He gave me the powder mentioned above; i only plan on reloading .38s, 357s, and .45s. Is this powder good? He also has a ton of CCI small and large primers. And YES, i will review the manual carefully before i even take the equipment out of the box!
chiz45 is offline  
Old July 12, 2001, 02:00 AM   #2
Paul B.
Senior Member
 
Join Date: March 28, 1999
Location: Tucson, AZ
Posts: 2,650
Chiz45. You failed to mention what type of powder it was.
let us know and then we can answer you.
Paul B.
__________________
COMPROMISE IS NOT AN OPTION!
Paul B. is offline  
Old July 12, 2001, 08:34 AM   #3
chiz45
Senior Member
 
Join Date: April 27, 2000
Location: Las Vegas, NV
Posts: 197
Damn, i always seem to do that!

The powder is "Winchester Ball Powder 231"

Sorry about that!
chiz45 is offline  
Old July 12, 2001, 09:21 AM   #4
LIProgun
Senior Member
 
Join Date: August 27, 2000
Location: Hudson Valley, NY
Posts: 489
Win 231 is an excellent powder for .38 Special and .45 ACP in light (target) and standard loads, IMO. You can use it for .357 Magnum in light (target) and mid-power loads, but to duplicate magnum velocities you should use a slower burning powder like Win 296, Alliant 2400, or AA #9.
__________________
MOLON LABE.

- Leonidas of Sparta, 480 B.C.
LIProgun is offline  
Old July 12, 2001, 12:23 PM   #5
Bogie
Senior Member
 
Join Date: June 5, 2000
Location: Job hunting on the road...
Posts: 3,827
Did he give you any manuals - STICK TO THE LOADS.

231 is a fast powder, and will work well for target loads. HOWEVER, it is VERY EASY to double charge a case, which tends to really bleep up your day.

Only use data for 231. Not for something similar... Or close... Or just like...
__________________
Job hunting, but helping a friend out at www.vikingmachineusa.com - and learning the finer aspects of becoming a precision machinist.

And making the world's greatest bottle openers!
Bogie is offline  
Old July 12, 2001, 02:10 PM   #6
chiz45
Senior Member
 
Join Date: April 27, 2000
Location: Las Vegas, NV
Posts: 197
there are some books that he provided along with the stuff. I figure what do THEY know, i'll fill the cases to the rim, cram the bullet in and have at it. I'll get you all the results later.



Just kidding. Reloading actually scares the hell out of me. But I do want to learn, and want to do it right. Thanks for the insight!
chiz45 is offline  
Old July 12, 2001, 07:27 PM   #7
Sisco
Senior Member
 
Join Date: March 25, 1999
Location: KS
Posts: 1,558
I use lots of W231 in 9mm, 38spcl, .357 mag & 45acp, great powder.
Read all the books first. Go to your local library and see if they have any and read them too. The Lyman's 47th is a good one, so are the Speer and Modern Reloading by Richard Lee.
Reloading is safe and fun if you'll always remember: NO distractions while reloading. Double check everything.
__________________
"I don't mind it when stupid people say stupid things. Stupid people should be encouraged to say stupid things, that way we always know who the stupid people are." ~ Ted Nugent
http://www.awbansunset.com/awcountdown_sm.gif
Sisco is offline  
Old July 14, 2001, 07:05 AM   #8
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,270
Wearing safety glasses when loading is MANDATORY.
__________________
.
"all my ammo is mostly retired factory ammo"
WESHOOT2 is offline  
Old July 16, 2001, 01:22 PM   #9
seadog
Senior Member
 
Join Date: October 27, 2000
Location: Virginia
Posts: 287
Ditto on the suggestions on reading a good manual. You have NO Business starting reloading until you have done so. This is one hobby where you cannot ignore the safety warnings. Once aware of the pitfalls, remain somewhat "scared" during each loading session and recheck your charge weights and do not have ANY distractions while loading. It's kind of like riding a motorcycle, it's a lot of fun, but once you think you "know it all", that's when you will get "bit"...I've been bit by both...
seadog is offline  
Old July 16, 2001, 08:20 PM   #10
Johnny Guest
Moderator Emeritus
 
Join Date: August 28, 1999
Location: North Texas
Posts: 4,116
Well said, - - -

Everyone. Especially seadog's reference to being bit by both handloading and motorcycles.

chiz45-- Welcome to the wild and wonderful world of handloading.

Yup, W-231 is a good versatile powder. Just don't try to make it do things for which it was not designed. I load a lot of it in .45 ACP and .38 SPL. The only trick is to stay within the limits set in the manuals. Neither of these calibers is a magnum, and they are both a lot of fun using loads within standard specs.

The .357, on the other hand, IS a high pressure number, so, once you get beyond low-end loads, please obtain a more suitable powder than 231, and exercise due caution.

Best regards,
Johnny
__________________
MOLON LABE!
Amendment II ensures the rest of the Bill of Rights.

Blog: Expert Witness
Johnny Guest is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:10 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08573 seconds with 9 queries