The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old June 18, 2001, 12:37 AM   #1
Cal4D4
Senior Member
 
Join Date: June 18, 2001
Location: southern california
Posts: 679
progressive presses

How about some opinions from those using RCBS 2000, Hornady LNL, Dillons 550b & 650 and any others such as Lee. I am approaching a new press purchase (first progressive) and these have caught my interest. Loading for 3+ pistol calibers and 2 rifle. Money is burning a hole in my pocket. I need to make a decision soon. Any help?
Cal4D4 is offline  
Old June 18, 2001, 12:43 AM   #2
Archie
Senior Member
 
Join Date: May 26, 2000
Location: Hastings, Nebrasksa - the Heartland!
Posts: 2,096
Dillon XL 650.

Loads all the normal (some not so normal) handgun and rifle calibers... easy to set up and use... great guarantee.

(I do not work for Dillon, except in the sense I am forever sending them money for gadgets and stuff.)
__________________
There ain't no free lunch, except Jesus.
Archie

Check out updated journal at http://oldmanmontgomery.wordpress.com/
Archie is offline  
Old June 18, 2001, 01:54 AM   #3
David Wile
Senior Member
 
Join Date: June 14, 2001
Location: Mechanicsburg, PA
Posts: 582
Hey Cal,

I have quite a number of metalic and shotshell presses of various brands including Lyman, RCBS, Hornady, Pacific, and MEC. I like them all, and I still use them all. Nearly ten years ago I started thinking about getting a progressive press for metalic shells. I was interested in looking at RCBS, Hornady, and the Dillons, so I talked to a lot of people at the ranges to find a few who had these progressives and were willing to let me see how each model worked.

I saw them all, and I was able to actually use them all before I actually made a decision. If you took a poll on this site, I am pretty sure you would find there are more Dillon users out there than anything else. I did not, however, choose any of the Dillon models.

Everyone talks about how good the Dillon warranty is and how quickly Dillon replaced or repaired something that went wrong and that it did not cost anything. If you listen to such comments, you have to conclude the Dillon users are having a lot of problems that Dillon is fixing for them free.

I did not find that to be the case with the Hornady Lock n' Load. Hornady also claims to have a good warranty. I already had owned and used two Hornady progressive shotshell machines for quite a few years. Since nothing ever went wrong with my Hornady shotshell presses, I never had to have anything fixed or replaced under warranty.

Many of the Dillon users seem to have chosen Dillon because they can change shell heads and not have to change die sets. I suspect that Hornady came out with its Lock n' Load feature in response to the Dillon removable head feature. Both features do the same thing, but, quite frankly, I do not care for either of them. Not that they do not work, but rather, because I prefer to change my dies and reset a powder dispenser the old fashioned way.

The Hornady L&L is a massive five station press that works well and is a lot less expensive than a comparable Dillon. I would suggest that you actually see the different presses in operation before you make a choice. At that point, you might prefer a Dillon or some other press, but at least look for yourself. Do not take my word or anyone else's word for what they do.

Best wishes,
Dave Wile
David Wile is offline  
Old June 18, 2001, 07:56 AM   #4
ArmySon
Staff Alumnus
 
Join Date: April 14, 2000
Posts: 2,926
I highly suggest you run a search on Dillon 550 650 etc. There's a wealth of information in the archives.
__________________
Your friends will forgive your mistakes. Your enemies will kill you for it.
ArmySon is offline  
Old June 18, 2001, 09:21 AM   #5
Steve Smith
Senior Member
 
Join Date: December 9, 1999
Posts: 4,131
Agree with Son. There's been more info on this subject here in the Reloading forum than you can imagine.

Dillon 550B
__________________
Favor the X.


Steve Smith
NRA Life Member
Steve Smith is offline  
Old June 18, 2001, 11:30 AM   #6
Fred S
Senior Member
 
Join Date: July 2, 1999
Location: New Baltimore, MI
Posts: 569
Dillon 550B

>If you listen to such comments, you have to conclude the Dillon users are having a lot of problems that Dillon is fixing for them free. <

Don't let that bother you. The very few problems I've had with my Dillon, I induced by doing something dumb. Although I screwed it up, Dillon replaced the part with no questions asked. Regardless of the press you get, you will make a boo boo somewhere along the line, you're going to make a mistake like getting a case stuck in a die because you forgot to lube it and it won't come out.....
__________________
Fred S

GO ARMY
Fred S is offline  
Old June 18, 2001, 11:33 AM   #7
Bullitt
Senior Member
 
Join Date: June 12, 2001
Location: TN
Posts: 225
I use a Lee Pro 1000, it will only load for pistols, but if their higher end press, the Load Master (loads both rifle and pistol), loads this good and consistent, you won't be able to beat it for the price. Check it out http://www.leeprecision.com/catalog/...843=ldmas.html
__________________
"The very fame of our strength and readiness would be a means of discouraging our enemies; for 'tis a wise and true saying, that `One sword often keeps another in the scabbard.' The way to secure peace is to be prepared for war. They that are on their guard, and appear ready to receive their adversaries, are in much less danger of being attacked than the supine, secure and negligent."
1747 (Smyth, Writings of Benjamin Franklin, 2:352.)
Bullitt is offline  
Old June 22, 2001, 09:12 PM   #8
Bushman556
Junior Member
 
Join Date: June 19, 2001
Location: WV
Posts: 6
You can't go wrong with Dillon presses. My press is a RL450B which is the ancestor to the 550B. Thousands upon thousands of rounds have come off this press with no breakdowns. I could update my press to 550 specs, but it fits me well now.

Just because you hear about Dillons great warranty and service does not mean they break a lot. If they did they probably go out of business.

I would buy another Dillon without a second thought.


Bushman556
Bushman556 is offline  
Old June 22, 2001, 11:37 PM   #9
beemerb
Junior member
 
Join Date: October 2, 1999
Location: AZ
Posts: 1,759
I have had two problems with dillon products.
1-electrinic scale went south.I only live about 90 mi so went to dillon.Replaced and out of there in 10 min.
2-My fault.A screw loosened up on my powder measure and jammed the system,broke a casting.Again a no questions asked 10 min replace.
Dillon is a very trouble free system.These two problems are all the problems I have had in about 8 yrs of useing dillon 450's and now a 550b.No system will not break but dillon is well built and doesn't give user much for problems.A progressive press has more moveing parts then a single stage thus is more prone to problems.That is common sense so don't be fooled by people telling you that dillon has more problems with breakage then any other unit don't believe it.The simple fact is that when you do have a problem you have some of the best backup and warrenty that is around.
beemerb is offline  
Old June 23, 2001, 02:36 AM   #10
Scooter2
Senior Member
 
Join Date: January 16, 2001
Posts: 115
I know a guy who owned a Dillon 550 for over 25 years. Millions of rounds have been loaded with the press, he was a competition shooter. He sent it back to have it refurbish because all the pivots were loose and to bill him for all the work. A couple weeks later, he got it back and the bill was $0. If they actually refurbish the press, they did a damn good job. He couldn't tell the difference between that press and a brand new one. How's that for customer service.

You can't go wrong with a Dillon.
Scooter2 is offline  
Old June 23, 2001, 10:42 AM   #11
Intel6
Senior Member
 
Join Date: October 13, 2000
Posts: 425
I have 2 x 550's and a 650 and won't own anything else!
Intel6 is offline  
Old June 23, 2001, 11:40 AM   #12
kidcoltoutlaw
Senior Member
 
Join Date: April 13, 2000
Location: bluefield
Posts: 735
rcbs pro 2000

is the way to go built like a tank.and very simple to use .great all the way around.break a part its just a phone call away.ex for the aps you would need a hammer to break a part
__________________
It's not just a gun it's the symbol of freedom
kidcoltoutlaw is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:56 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08783 seconds with 9 queries