The Firing Line Forums

Go Back   The Firing Line Forums > The Conference Center > General Discussion Forum

Reply
 
Thread Tools
Old January 3, 2014, 09:15 AM   #51
campbed
Member
 
Join Date: March 8, 2013
Location: New Hampshire
Posts: 43
MPro-7 LPX oil and cleaner for AR platform.

Ballistol CLP and MPro-7 LPX oil for pistol.
__________________
If you would only recognize that life is hard, things would be so much easier for you. - Louis D. Brandeis
SIG P226 MK25 9mm + [.22 Rimfire Conversion Kit]
SIG M400 Enhanced Black
Beretta Nano
campbed is offline  
Old January 3, 2014, 04:08 PM   #52
KeeperOath
Member
 
Join Date: December 24, 2013
Posts: 44
Price of Gun Oil:

I have a few firearms and I clean them regularly, but since I use so very little oil at each cleaning, the price of the oil does not affect me.

I like ProLong SPL100 and Ballistol. I have a nice collection of other firearm Lubes.
KeeperOath is offline  
Old January 3, 2014, 04:30 PM   #53
ChasingWhitetail91
Senior Member
 
Join Date: October 10, 2012
Location: Connecticut
Posts: 336
Been using Rem Oil for a while with no complaints.
__________________
Abraham Lincoln made all men free, Samuel Colt made them equal.
ChasingWhitetail91 is offline  
Old January 5, 2014, 01:56 PM   #54
F23Blackwidow2
Member
 
Join Date: January 30, 2013
Location: NY, sadly.
Posts: 71
I use some good old 10w-30 for most things, and high temp bearing grease for any really high friction areas, like slides. As long as you take your guns out and wipe them ocasionaly, you should be perfect.

F23
__________________
I always made one prayer to God, a very short one. Here it is: "O Lord, make our enemies quite ridiculous!"

God granted it.
F23Blackwidow2 is offline  
Old January 5, 2014, 09:30 PM   #55
L_Killkenny
Senior Member
 
Join Date: February 2, 2007
Location: Iowa
Posts: 2,676
Best? I have no idea what is best. It would take ten lifetimes of research to find out what's best. I do know that I've had zero issues using any gun lube on the market, past tense included. "What lube?"is over thinkin created by wintertime blues.
L_Killkenny is offline  
Old January 5, 2014, 09:37 PM   #56
Pops1085
Senior Member
 
Join Date: November 25, 2012
Posts: 196
True ^^^

But... I'm switching to fp-10 and this video is why!

http://m.youtube.com/watch?v=YCPg8mS_7wM
Pops1085 is offline  
Old January 6, 2014, 06:10 AM   #57
CajunBass
Senior Member
 
Join Date: May 6, 2005
Location: Chancellorsville, Virginia
Posts: 3,331
I just use some stuff called "gun oil" that I got at Wal-Mart. It works on fishing reels too.

Reel oil oddly enough, works on guns too.
__________________
For God so loved the world, that He gave His only begotten Son, that whoever believes in Him should not perish, but have everlasting life.
John 3:16 (NKJV)
CajunBass is offline  
Old January 6, 2014, 10:28 PM   #58
BuckRub
Senior Member
 
Join Date: October 3, 2012
Location: Central Texas
Posts: 973
Never seen video but it is impressive. I already use FP-10 because there's a gun store in college station , TX that I asked their opinion of a good lubricant and they told me FP-10 was about the best.
BuckRub is offline  
Old January 10, 2014, 12:37 PM   #59
gullydirt
Junior Member
 
Join Date: March 17, 2010
Posts: 6
3 in 1 Oil

I have never heard a complaint about 3 in 1 oil on guns..it's been around for 120+ years.

Why change?
gullydirt is offline  
Old January 11, 2014, 01:19 PM   #60
DMZX
Senior Member
 
Join Date: June 6, 2007
Location: E. Oregon
Posts: 543
In my formative years, my cash flow from mowing lawns was meager to say the least. I had a JC Higgins semi-auto .22 and a JC Higgins single shot 20 gauge.

My lube of choice was LSA, due to the fact that a local surplus store sold the
4oz bottles for 25 cents.

It worked very well and I got to love the smell of it.

I know it is still available here and there, but not at the old surplus price, so I use modern gun oils now.
DMZX is offline  
Old January 12, 2014, 06:14 PM   #61
Darren007
Senior Member
 
Join Date: November 18, 2007
Location: Colorado
Posts: 1,030
Quote:
True ^^^

But... I'm switching to fp-10 and this video is why!
That machine they use to test "lubricity" is a complete sham. Snake oil salesman in the auto industry use the same machine to push crap like "Duralube" and "Zmax". Several sites have debunked these carnival barkers, using the same machine and a bottle of shampoo, they got the exact same results.
Darren007 is offline  
Old January 12, 2014, 06:31 PM   #62
zxcvbob
Senior Member
 
Join Date: December 20, 2007
Location: S.E. Minnesota
Posts: 4,018
I don't know that guns are all that hard on the lube. I use Dexron transmission fluid.
__________________
"The only way to stop a bad guy with a gun is with a good guy with a gun"
zxcvbob is online now  
Old January 12, 2014, 08:25 PM   #63
stevelyn
Senior Member
 
Join Date: May 19, 2004
Location: Fairbanksan in exile to Aleutian Hell
Posts: 2,616
I've looked for a product better than Break-Free because it was what the Army used and well, I just wanted to get away from anything the Army used.

The truth is, is I haven't found anything that works as well for me as Break Free does.
__________________
Herman Cain '12

Squished bugs on a windshield is proof the slow/heavy bullet theory works.
stevelyn is offline  
Old January 14, 2014, 11:59 AM   #64
bugout2112
Junior Member
 
Join Date: January 14, 2014
Posts: 3
Froglube fail

There's another thread on this, and I have to say I agree with his assessment. I know some people here may like it, but my experience with it is definitely not good. I have to say I'm pretty disappointed with this stuff, especially from all the hype about it being so non-toxic you can use it as mint frosting on a bundt cake. I also took some time before finalizing my opinion and my conclusion is that it's viscosity changes over time, and it's and it just plain turns to syrup when it sits for a while (in my experience). I ordered the froglube liquid about a year ago, and it works great initially, as in, clean and go shoot within a week, and it has interesting cleaning properties (after using Mpro7 cleaner with nothing on the patch, you can get more black with froglube), but the problem is when you clean/lube and then store. Yes, I know the company will say I put too much on, but that is bs. I don't over-lube my guns at all, the problem is that when it's on my p220 is sitting inside my nightstand after month or so, racking the slide feels like it was dipped in maple syrup, very sluggish and gummed up, like a dampening system was put in the gun. This should not happen. The action is jacked up, and i have to go through all my guns now and get this gunk off. Their MSDS is basically a secret, and it's my suspicion that they are using some natural oil (jojoba, or avocado) and combine it with a super strong minty substance to mask it so you can't tell (it almost smells sugary) which oxidizes over time and becomes thick and syrupy (but this is just my theory). I think in colder weather, "the syrup effect" is even worse. If you like this stuff, great, but this is my experience. If anyone has any recommendation on another non-toxic, non-carcinogenic lube (I heard about Slip 2000 EWL?) let me know. Thanks.
bugout2112 is offline  
Old January 14, 2014, 12:05 PM   #65
Grizz12
Senior Member
 
Join Date: December 11, 2012
Posts: 272
Bugout, if its getting gummy, you are using too much, period… Read the instructions and then follow the instructions and the stuff will work great for you.
Grizz12 is offline  
Old January 14, 2014, 01:02 PM   #66
bugout2112
Junior Member
 
Join Date: January 14, 2014
Posts: 3
Grizz, from the FL website..

http://froglube.com/froglube-product....fohNfDMZ.dpuf

Froglube CLP

1) Pre-clean using above procedure with FrogLube Solvent™.
2) For best results, apply heat to area to be treated. Heat from a heat lamp, heat blower or ambient sunlight is more than sufficient.
3) Apply FrogLube and allow time to absorb. (heat quickens the rate of absorption)
4) Scrub, agitate, and wipe off excess. Normal cleaning tools such as nylon brushes, patches, wipes and towels are sufficient.
5) Lubricate per manufacturers instruction. FrogLube will work dry or wet.
Note: In hot/dusty or extreme cold, follow manufacturers directions for use in extreme environmental conditions.
6) If storing, apply a light coat for long term protection.

I followed these instructions...so step 5 must be very misleading, especially the whole "working wet deal" huh? And step 6 should say "if storing, apply a light coat, and don't plan on normal function as it will turn to syrup in a few weeks. You must field strip and clean again"
bugout2112 is offline  
Old January 14, 2014, 01:49 PM   #67
Grizz12
Senior Member
 
Join Date: December 11, 2012
Posts: 272
the only time I had issues with FL is when I applied it with my fingers and didn't wipe it down with a rag. Now all my guns are "seasoned" with FL and I wipe down to clean after each trip to the range and then apply a drop or two here and there and wipe across all moving parts with a rag.

You can't see any lube anyplace and it will feel dry after a few minutes. I live a few miles from the ocean so salt air is a problem or I should say it WAS a problem for me, not any longer.
Grizz12 is offline  
Old January 14, 2014, 03:27 PM   #68
bugout2112
Junior Member
 
Join Date: January 14, 2014
Posts: 3
k, thanks for your input. I might try storing my firearms a lot more "dry" with FL and see how they do..
bugout2112 is offline  
Old January 14, 2014, 03:42 PM   #69
TheFlash
Member
 
Join Date: October 9, 2012
Location: San Jose, CA
Posts: 42
Also agree with the 'free samples' and give 'em a try...

Received samples of Militec-1 and used that - both oil and grease. Worked fine.
At last year's SHOT Show, I received a sample of Slip2000 EWL and have used that on both pistol and rifle - works fine.

Over the years have used RemOil, G96 and several others.
All worked fine.

So, unless you are in extreme conditions, I would say that just about anything will work well.
(Note: I too have noticed that 1911's work best with a bit of grease on the rails. Oil didn't seem to quite do the trick and once switched to grease - all is good.)
TheFlash is offline  
Old January 22, 2014, 06:31 PM   #70
Average Joe
Senior Member
 
Join Date: August 29, 2005
Location: Easton, PA
Posts: 917
I only use Breakfree CLP on all of my firearms.
Average Joe is offline  
Old January 23, 2014, 04:29 AM   #71
Ignition Override
Senior Member
 
Join Date: February 18, 2008
Posts: 1,758
How about Hilco Lube? It was recommended by the wife of a military sniper and is used for many types of machinery.

This is Not lube in terms of grease.
It feels sort of like Breakfree, and Hilco did a nice job as a solvent in tiny areas which still had some cosmoline in my pair of excellent, almost unused Yugo M59 SKS rifles.

This stuff soaking in well prevented any more stovepipe jams, which had been very frequent-even After the tube, piston, action components and follower etc had been cleaned with both scalding water and some Hoppe's 9.

Having the word "gun" (or not) on a label doesn't ensure that something is the best product.
Ignition Override is offline  
Old January 24, 2014, 12:46 AM   #72
BDM 9MM
Member
 
Join Date: June 21, 2011
Location: Grand Junction, Co.
Posts: 63
Oils

The answer is not what oil as much as when. I clean and re-oil or lube after each use. My first rifle - Crossman pellet gun was lubed using 3-in-One and Rig. I have not felt the need to change in the last 60 years.

Most of the new latest and greatest oils & lubes are made from snake oil. For the most part they all work if you use them and don't work if you don't.

The Strawstalker, behind the lines in Liberal Colorado.
__________________
Dan Bromley
NRA Instructor
NM Game & Fish Instructor
BDM 9MM is offline  
Old January 24, 2014, 12:56 PM   #73
Jim March
Senior Member
 
Join Date: February 14, 1999
Location: Pittsburg, CA, USA
Posts: 7,237
Funniest has to be:

http://shop.tactical****.com/liberal-tears-gun-oil

And yes, this is a real product from a real company.

__________________
Jim March
Jim March is online now  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:47 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.13451 seconds with 9 queries