The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: General

Thread Tools
Old December 7, 2013, 08:13 PM   #1
Join Date: August 21, 2013
Location: The Appalachian Mountains
Posts: 47
Double barrel .45?

I saw a double barrel .410 yesterday and it gave me a crazy thought. I know that the public defender and the judge can shoot both .410 and .45 long colt but what about a shotgun designed for 410? Hypothetically could you load a SXS or an O/U chambered in .410 with a .45 long colt. I figure accuracy would be close to naught but could the gun shoot the .45s no problem? If not why?
Nothing Exceeds Like Excess

Last edited by RED_beard92; December 7, 2013 at 08:19 PM.
RED_beard92 is offline  
Old December 7, 2013, 08:31 PM   #2
Jim Watson
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 10,601
Squeezing a .452" bullet through a .410" barrel would be hard on the machinery... and maybe the user.

The various .45-.410 combo gimmick guns have .45 barrels with .410 length cylinders.
Jim Watson is offline  
Old December 7, 2013, 08:37 PM   #3
Junior member
Join Date: December 20, 2012
Location: The "Gunshine State"
Posts: 1,982
Besides the bullet differences, those shotguns are NOT designed for the pressures generated by the handgun or rifle loadings
BigD_in_FL is offline  
Old December 7, 2013, 08:51 PM   #4
Join Date: August 21, 2013
Location: The Appalachian Mountains
Posts: 47
Thanks for that point Jim. I didn't even think about that. Also I figured bullet pressure would be an issue but just wasn't certain. Thanks
Nothing Exceeds Like Excess
RED_beard92 is offline  
Old December 8, 2013, 12:16 PM   #5
44 AMP
Join Date: March 11, 2006
Location: Upper US
Posts: 10,604
Someone else asked something similar not long ago (although without the double barrel mention). Same answer.

I don't know why, but apparently there is some confusion. ALL the .45/.410 guns are NOT .410 shotguns that can fire .45 Colt ammo. They are .45 COLT gun that can fire .410 ammo.

Thompson Center came out with the .45Colt/.410 barrel for their Contender a long time ago, and my experience is that it is a fairly good compromise, BUT BOTH rounds suffer in their performance.

.45 Colt's long bullet jump in the .410 length chamber often (not always, but often) means accuracy isn't as good as a standard .45 Colt barrel. I can prove this if you like, your gun may be different, but I wound up getting a separate .45 Colt (only) barrel for my Contender, as the .45/.410 just wasn't as good as I liked, in .45.

In .410, the shotshell suffers from a degraded pattern, compared to the smoothbore, because of the rifling. The "straightner" section does help, but patterns are still below par compared to a true shotgun. The real "advantage" to a .45/.410 gun is that you have a .45Colt, that with a simple change of ammo, works passably well as a short range shotgun. The factory .410 shell simply works better as a shotshell than a handloaded shot charge in a .45Colt case. And that's about all it does.

A compromise, but useful is some situations. .410 slugs are pretty zippy numbers, and there is some promising power there, BUT, being what they are, accuracy isn't up to rifled gun standards. You may get a degree of precision from any given shot, but you just cannot count on it, being a subcaliber slug in a rifled .45 bore.

The current market interest in the Judge (and its copies and variations) is, I think, a bubble, with most buyers either not knowing the full reality of what it is that they are getting, or worse, believing the BS about "not being able to miss" with a shotgun.

IF Federal laws allowed it (technically, they do, but its a cumbersome process), a handgun size shotgun (smooth bore) would be an awesome, and effective piece for many situations. SO we are handicapped by the decisions of our political rulers as to what is, and is not "suitable" for us to own.

So we get a handgun that as a shotgun, isn't as good as it could be, and not quite as good as it could be firing standard bullets as well.

Generally, shotguns are not built to stand the pressure of even a moderate handgun round. Action design just isn't up to that, in most guns. And in the older guns, sometimes the materials aren't up to it either.

Although it does bring up the idea of something like a Winchester model 42, reconstructed to manage .45 Colt......It wouldn't be simple or cheap, but it would be interesting...especially solving the feeding issues....
All else being equal (and it almost never is) bigger bullets tend to work better.
44 AMP is offline  

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 08:12 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.07091 seconds with 9 queries