The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old November 26, 2013, 10:17 PM   #1
skizzums
Senior Member
 
Join Date: July 1, 2013
Location: Douglasville, Ga
Posts: 1,259
rifled barrel for slugs?

hi guys, i own a good bit of firearms and cast and reload my own ammo. i have just never gotten around to getting a shotgun even though i do thoughouly enjoy them. but since i cast my own ammo i figure i'll be wanting a slug gun. my question is, is a rifled barrel the same as a slug barrel? or is a slug barrel just a shorter rifled barrell, or are they rifled at all? and do i need a rifled barrel to shoot slugs?
__________________
My head is bloody, but unbowed
skizzums is offline  
Old November 26, 2013, 10:39 PM   #2
Doyle
Senior Member
 
Join Date: June 20, 2007
Location: Starkville, MS (new to MS)
Posts: 4,661
"slug" barrels have rifle sights. They are normally shorter than a normal shotgun barrel - typically 20" or so. They can be either rifled (for shooting sabot slugs) or smooth bore (for shooting rifled slugs). All rifled barrels are slug barrels but not all slug barrels are rifled.
Doyle is offline  
Old November 26, 2013, 10:47 PM   #3
skizzums
Senior Member
 
Join Date: July 1, 2013
Location: Douglasville, Ga
Posts: 1,259
okay, thank you for clearing that up. for someone who wants to cast slugs, i would then assume i would want a rifled barrell. i would rather not have to cast rifled slugs if that's even possible.
__________________
My head is bloody, but unbowed
skizzums is offline  
Old November 27, 2013, 07:18 AM   #4
TMW89
Senior Member
 
Join Date: March 3, 2013
Location: MI
Posts: 185
Theres many a company that make rifled slugs. they kinda have little "fins" almost, around the edge to imitate rifling. those should be used in a non rifled barrel
__________________
Springfield XDM9C
Savage Mark II F .22
H&R ultra slug hunter 20 ga
1942 Mosin Nagant "Natalia"
TMW89 is offline  
Old November 27, 2013, 08:23 AM   #5
jaguarxk120
Senior Member
 
Join Date: February 28, 2008
Location: Michigan
Posts: 1,928
Lyman has a mold for a slug designed to be used with a standard shot cup. And is shot out of a rifled barrel.

All of the ammunition companies load shells designed for rifled barrels, sabots.
jaguarxk120 is offline  
Old November 27, 2013, 01:41 PM   #6
Nickel Plated
Senior Member
 
Join Date: January 17, 2010
Location: Brooklyn, NYC
Posts: 529
I really dislike the term "rifled slug" It's very misleading. Those grooves on the slug are not rifling, they do not serve the purpose that rifling in firearms generally serves, which is to spin the bullet.

Those fins are simply there to allow the slug to squeeze down to a smaller caliber when firing through a choke without creating unsafe pressures. They do not impart any spin on the slug. Rifled slugs were created back during the depression, the fins were to let people shoot slugs out of their regular bird gun (since back then you could hardly afford to buy a dedicated slug gun). Those old shotguns typically had fixed chokes that you couldn't remove for shooting slugs. So the fins were added to let the slug pass through a choke.

Essentially you use "rifled" slugs in a smooth bore barrel and sabot slugs in rifled barrels.
Using rifled slugs in rifled barrels is possible, but the fins create too little contact area between the slug and barrel for the barrel's rifling to have any real effect. And generally causes leading in the barrel.
Using sabot slugs in a smooth bore is just a waste. They're expensive and without a rifled barrel to give them a spin, you may as well be shooting the much cheaper lead slugs.
Nickel Plated is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:08 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07492 seconds with 9 queries