The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old November 9, 2013, 10:24 AM   #1
mehavey
Senior Member
 
Join Date: June 17, 2010
Location: Virginia
Posts: 2,821
BP_Cartridge Revolver fouling/cleanup

I shoot any number of BP-charged BPCartridge rifles (falling blocks/rolling blocks) and also BP C&P pistols -- but never BPcartridge revolvers (yet).

How much tear-down/cleaning is involved after a BPcartridge revolver session?
(anything like what we go through w/ C&P?)

And how badly/quickly does fouling build up in the cylinder gap to prevent turning?
mehavey is online now  
Old November 9, 2013, 11:47 AM   #2
MJN77
Senior Member
 
Join Date: April 27, 2009
Location: on a hill in West Virginia
Posts: 687
Quote:
How much tear-down/cleaning is involved after a BPcartridge revolver session?
You clean the frame, cylinder and barrel. Not a big deal.

Quote:
And how badly/quickly does fouling build up in the cylinder gap to prevent turning?
Depends on the gun. Colt style revolvers last the longest. I have put 2-3 boxes of BP ammo through them at one time and I haven't bound one up yet. Remington style revolvers will go through a box or so before you need to wipe them down. The replica S&W top break revolvers don't do well with BP. You might get 20-30 shots before they get sticky. All this from my personal experience. Others have no doubt had their own.
MJN77 is offline  
Old November 9, 2013, 11:53 AM   #3
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 11,694
What MJN said.
Hawg is offline  
Old November 9, 2013, 11:59 AM   #4
Doc Hoy
Senior Member
 
Join Date: October 24, 2008
Location: Chesapeake, VA
Posts: 4,562
As much as you want....

That is a kind of smartypants answer and I don't mean to condescend.

I like to go pretty far with cleaning. Disassembly including the triggerguard so I can see the innards.

I clean in hot water with liquid dish detergent with backstrap, triggerguard, cylinder and pin pulled apart.

On a cap and ball revolver I take the nipples out every time, but I know you are not asking questions about cap and ball. I say that to give you the impression that I am fairly thorough.

Others may be less fastidious as a rule, only doing a deep cleaning once every third outing or something like that.

I buy a bag of bottle brushes from Horrible Freight. They are nylon bristle brushes with about three different diameters. They are great for barrel, cylinder and the pin hole in the cylinder. They also have an assortment of metal brushes which include some brass bristle brushes. I use those to clean up the inside of the frame and forcing cone.

Then out of the dishpan, rinse and into the oven at 275 for about thirty minutes to dry out the piece.

Douche it down with Rem Oil and slap it back together.
__________________
Doc

My reading of history convinces me that most bad government results from too much government. Thomas Jefferson
Doc Hoy is offline  
Old November 9, 2013, 12:45 PM   #5
Rigmarol
Senior Member
 
Join Date: January 29, 2005
Location: Southern California
Posts: 341
I admit I don't tear my Colts down each time as far as I do when I shoot them with the C&B cylinders in them. When I shoot with BP cartridges, I clean them up the same as I do my smokeless powder revolvers. Frame, Cylinder, Barrel, inspect and put together.

I use hot soapy water, WD40 (water displacement) and oil.
I lube up the Arbor and Rachet with Wonder Lube and I'm ready for the next match.

If you shoot BP with fillers, you MIGHT not get a full seal on your cartridge case and you MAY get more blow by than a normal round and it CAN create a bit more fouling to clean up. If you shoot a full load, you will more likely get a good seal and not as much blow by fouling.

I use my own cast bullets using Dick Dastardly's "Big Lube" style bullet to carry as much lube as possible. Lots of lube seems to keep the barrel fouling down for an entire match just fine without having to field clean the guns.

I have no problems shooting 40 rounds through each pistol and 80 through my rifle during a match.
Rigmarol is offline  
Old December 1, 2013, 06:34 PM   #6
medic15al
Member
 
Join Date: November 6, 2007
Location: Pell City, AL
Posts: 83
I use Ballistol 25-75 mixed with water as recommended on bottle. Very clean guns and fast clean up.

deulist1954 has an excellent video on cleaning blackpowder guns on his youtube homepage.
medic15al is offline  
Old December 1, 2013, 07:06 PM   #7
BirchOrr
Senior Member
 
Join Date: November 25, 2012
Location: Eaton Rapids, MI
Posts: 348
Yes indeed...

... the big dawgs on this forum that really know what they're doin', have spoken.



You can take that to the bank.



Birch
__________________
Black Powder: Not because it is easy, but because it is hard, because that goal will serve to organize and measure the best of our energies and skills, because that challenge is one that we are willing to accept, one we are unwilling to postpone, and one which we intend to win...
BirchOrr is offline  
Old December 6, 2013, 08:14 PM   #8
royal barnes
Senior Member
 
Join Date: March 11, 2012
Location: Wendell, N.C.
Posts: 156
I have been shooting BP in CAS matches for about 17 years. I use a Ballistol water mix and wipe the pistol down inside and out, clean chambers and barrel, then wipe down with full strength Ballistol. I completely strip my BP guns down once a year to deep clean. Never had any rust. As an old time BP shooter told me, "if you take your guns completely apart every time you shoot them you're just wearing out the screws. He's right.
royal barnes is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:23 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08055 seconds with 9 queries