The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old October 17, 2013, 12:27 PM   #1
Sevens
Senior Member
 
Join Date: July 28, 2007
Location: Central Ohio
Posts: 8,683
Colt Woodsman Magazine substitution

Made a discovery when looking to trouble shoot a particular issue in a Second Series Colt Woodsman. I would never believe that I was the "first" to discover this, but I can say that I never looked in to it and never got a tip to it.

Bottom line is that a Ruger Mark II magazine is the same angle & dimensions (mostly) to run, and run perfectly well in a Second (& would assume Third) Series Colt Woodsman or variant if/when you are able to lock it in place at the correct height.

What you end up with here is access to a tremendous supply of magazines that are cheaper, easier to find, run as well/better than the original and/or as well as the genuine Colt replacements. FWIW, the actual proper replacement or additional magazines for these pistols are not the "stainless" silver magazines often found on Gunbroker or Ebay, though those *can* work. Those magazines were actually made for the much later "Colt .22 Auto" pistols of much more recent manufacture. Those pistols would never be confused for a genuine Woodsman or variant. And those silver magazines *ARE* different than the OEM or Colt replacement magazines of earlier generations. Different where it matters, in my experience.

And for me personally, it's immediate access to SIX magazines that I already own and don't have to purchase, chase down or have shipped.

The Ruger Mark II magazine doesn't look "right" hanging from the bottom of the pistol of course, and the magazine must be modified to work, but that modification doesn't interfere whatsoever with that magazine's ability to still work in the Ruger Mark II for which it was designed.

I'm a million miles from a gun smith and have enough respect for true craftsman to make note of the fact that I am not one. But this "discovery" has been a great advantage to me, so I thought I would share.

Opinions and discussion is welcome.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Old October 17, 2013, 03:27 PM   #2
skywag
Senior Member
 
Join Date: February 24, 2011
Posts: 122
An interesting solution to a problem that doesn't exist.
skywag is offline  
Old October 17, 2013, 07:47 PM   #3
Bill DeShivs
Senior Member
 
Join Date: April 7, 2006
Posts: 7,045
I find it intriguing. I guess if you don't have a Woodsman, then the problem doesn't exist, or if you don't know what a Woodsman is, the problem doesn't exist.
But, If you need a Colt Woodsman magazine this is very good news.
Thanks!
__________________
Bill DeShivs
www.billdeshivs.com
Bill DeShivs is offline  
Old October 17, 2013, 08:40 PM   #4
DavidAGO
Senior Member
 
Join Date: October 7, 2008
Location: Magnolia, AR
Posts: 182
I agree with Bill, and I thank you for finding an interesting solution for a problem that does exist, finding magazines for a Colt Woodsman.

David
DavidAGO is offline  
Old October 17, 2013, 09:35 PM   #5
Sevens
Senior Member
 
Join Date: July 28, 2007
Location: Central Ohio
Posts: 8,683
Our smarmy little friend apparently also struggles with reading comprehension, as the '55 Huntsman that I purchased has a non-standard mag catch that won't even work with -ALL- of the Woodsman magazines on this planet except for the "altered" one that it arrived with, so I find myself in the wholly unpredictable position of *GULP* needing a solution for a problem that ceases to exist everywhere in the history of the Universe EXCEPT right here & now for the pistol that I happen to own.

And here I thought the participants in this area of the site would be of a certain, well, class. But I suppose that's merely wishful thinking.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Old October 17, 2013, 10:42 PM   #6
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,270
Not only a neat answer to the shortage of Woodsman magazines, but also a way to shoot the gun while preserving the original magazine(s) for collectors.

Jim
__________________
Jim K
James K is offline  
Old October 17, 2013, 11:14 PM   #7
Bill DeShivs
Senior Member
 
Join Date: April 7, 2006
Posts: 7,045
I'm going to see what I can do with a Ruger mag and a High Standard!
The grip angle on most of these guns is very similar.
__________________
Bill DeShivs
www.billdeshivs.com
Bill DeShivs is offline  
Old October 17, 2013, 11:18 PM   #8
Sevens
Senior Member
 
Join Date: July 28, 2007
Location: Central Ohio
Posts: 8,683
In some of the switching, checking, looking and thinking that I did, it sure seemed like the one single Buck Mark magazine I tried in the Huntsman also fit well and would have ran well just as the Mark II magazines have.

S&W 22A Magazines? No go. Sig Mosquito? Not even close.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:31 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07335 seconds with 9 queries