The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old September 24, 2013, 08:46 PM   #26
ZentetsukenVII
Member
 
Join Date: August 15, 2013
Posts: 36
Hey man, it's your gun. If you want to treat it like crap, more power to you. Try cleaning the hell out of it and it might fix your problem.
__________________
"All that is necessary for evil to triumph in this world is for good men to do nothing."
ZentetsukenVII is offline  
Old September 24, 2013, 09:52 PM   #27
semi_problomatic
Senior Member
 
Join Date: July 27, 2009
Location: Ft. Polk
Posts: 858
Easy to find out whats wrong though. Disassemble. Check your breech when you pull the barrel, check your slides and rails when you pull the forearm and bolt. It could be a number of things. Could be your breech is nasty and those rounds just got stuck. I'd imagine you'd of seen some trace of that on the shells though.

On a side note I was talking to a buddy today and his rem 11 has one of those cheap rounds jammed in it and the action wont open...while that gun is old, it was cleaned. Maybe the chambers are reamed a bit tighter? I dunno. Interesting question to ponder.
__________________
Freedom's just a word. If I'm gonna die for a word, my word is jello...
semi_problomatic is offline  
Old September 24, 2013, 10:14 PM   #28
mehavey
Senior Member
 
Join Date: June 17, 2010
Location: Virginia
Posts: 2,605
Beretta, barring outright rust & pitting in the 1st inch of the chamber the cleanliness
of your 870 is not your problem. (Cleaning/spinning some oiled medium steel wool in
that 1st inch wouldn't hurt though.)

The problem is in the steel-base ammunition now being sold as "bargain" Once fired it is
permanently expanded to the point that it will not re-enter the chamber. If it won't even
drop back in, what bad things does that imply about getting it out in the 1st place ?

Change to better quality hull bases and the problem will go away.
mehavey is offline  
Old September 25, 2013, 03:47 PM   #29
Destructo6
Senior Member
 
Join Date: March 18, 1999
Location: Nogales, AZ USA
Posts: 3,777
Quote:
Sure I probably "should" clean it more often, but until now I've never had a problem.
Yeah, I don't get too worked up about 870 cleaning. I usually don't clean them until they start giving me problems. And usually, that problem is the spent rounds sticking in the chamber.

Cleaning also gives you the opportunity to give all the parts and pieces a good examination.
__________________
God gave you a soul.
Your parents, a body.
Your country, a rifle.

Keep all of them clean.
Destructo6 is offline  
Old September 25, 2013, 03:54 PM   #30
Scattergun Bob
Senior Member
 
Join Date: February 29, 2008
Location: Nine Mile Falls, Washington
Posts: 1,186
The 6 "P" edict

Proper preventive maintenance prevents **** poor performance, has been around for a very long time. Each time we ignore it we create the enviroment for FAILURE.

Good Luck & Be Safe,
__________________
First, with the most, WINS!
Regards, Scattergun Bob
Scattergun Bob is offline  
Old September 28, 2013, 02:22 AM   #31
Sarge
Senior Member
 
Join Date: May 12, 2002
Location: MO
Posts: 4,781
686, I'm not an OC gun scrubber either. But the previous owner(s) of an old Revelation/Mossberg 500A I acquired, has us both beat. It was an old 70's gun that had layers of unburnt powder particles caked into the trigger assembly... took a soaking in Hoppes No 9 and two cans of carb cleaner to clean it out.

Your Express is of about the same vintage as my old Special Purpose, which was problematic as well. The issue with that one was an oddball shell carrier, not difficulty in unlocking. I'd say it's time to scrub your chamber bolt, carrier and the locking lug in the receiver.

FWIW my old '79 Wingmaster gobbles Universal, etc. by the hundreds.
__________________
Visit us at The Sixgun Journal or the archive, at http://sargesrollcall.blogspot.com/
Sarge is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:26 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08021 seconds with 9 queries