The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > NFA Guns and Gear

Reply
 
Thread Tools
Old September 10, 2013, 12:27 AM   #1
Deja vu
Senior Member
 
Join Date: March 14, 2010
Location: Border of Idaho & Montana
Posts: 2,096
Need to confirm a gun store rumor

I was at a local gun shop and I talked about my idea to make a SBS 1887. The guy was intrigued but said I should leave the shoulder stock on it. I replied that I am planned to have both a pistol grip and a shoulder stock. He told me that I would have to pick just one for the form1.

Is that true or canI state on the paper work that it will have two different stock lengths?
__________________
Shot placement is everything! I would rather take a round of 50BMG to the foot than a 22short to the base of the skull.

all 25 of my guns are 45/70 govt, 357 mag, 22 or 12 ga... I believe in keeping it simple
Deja vu is offline  
Old September 10, 2013, 08:23 AM   #2
HopeandChange
Member
 
Join Date: September 4, 2013
Location: AZ
Posts: 65
Pick one for the paperwork. Anything requiring brain cell activity will only confuse the examiner.

Now you may be dealing with 2 different classes of weapon. I think a pistol grip SBS is considered an AOW (any other weapon) or something.... and the stocked gun would be an SBS.

But since it's not a factory AOW, you're just going to be looking at an SBS.

You might run this by the NFA section on M4carbine.
HopeandChange is offline  
Old September 10, 2013, 09:17 AM   #3
Willie Lowman
Senior Member
 
Join Date: March 5, 2009
Location: Uh-Hi-O
Posts: 2,410
To clarify Hopeandchange

A shotgun must have left the factory with a pistol grip and never had stock installed to be a AOW. If it is registered as a AWO it may never have a stock installed later on.

If you the OP wants to have a pistol grip and a full length stock all that is required by the ATF is that the gun be able to be readily restored to it's length stated on the form 1.
Willie Lowman is offline  
Old September 10, 2013, 09:23 AM   #4
Beretta686
Senior Member
 
Join Date: May 11, 2005
Location: Texas
Posts: 715
It has to be an SBS, as it originally had a stock.

But on a side note, there's no reason to ever make an AOW via a Form 1, as you're going to have to pay $200 to register it. It's only the subsequent transfer via Form 4s that's $5 when it comes to AOWs.

As you're incurring the $200 tax either way, it's smarter to do an SBS as then you can add a stock or whatever you wish to it later on, unlike with an AOW (unless of course SBSs aren't legal where you live).
__________________
"Our contract called for 16 cases of rifles and ammunition for $10,000 dollars, not a machine gun...........That is our present to the General"-Pike Bishop

When fascism comes to America, it will be wrapped in the flag and carrying a cross.”
Beretta686 is offline  
Old September 16, 2013, 12:56 PM   #5
sf46
Junior Member
 
Join Date: October 13, 2001
Location: Louisiana
Posts: 13
Hope and Change and Willie are both correct from what I know of the situation.
sf46 is offline  
Old September 18, 2013, 10:03 PM   #6
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,170
IIRC, the application form doesn't address the type of stock, but does ask the overall length. So if you changed from a full stock to a pistol grip type, doesn't that change the OAL, which changes the information in the NFRTR? Is that OK to do without notifying BATFE? Or if you want to switch back and forth, what are the legal ramifications?

At one time, I would have said that BATFE wouldn't care, but today it could be seen as invalidating the registration and/or committing a felony by lying on the Form.

Jim
__________________
Jim K
James K is online now  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:47 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06434 seconds with 9 queries