The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools
Old August 27, 2013, 02:04 PM   #26
Pathfinder45
Senior Member
 
Join Date: January 7, 2008
Posts: 978
Some of you must be joking.....

Y'all clean up after yourselves, right? Must be hard to do with expanding foam, TV's and such...... There are a number of places on the Mt Hood National Forest that are frequented by slob shooters that are completely trashed now. I won't shoot in those places because it would make me an accomplice as in guilt by association. They are now closing portions of the Forest to shooting that have been abused in this way. If you abuse YOUR rights, ALL OF US could lose ours. Don't shoot, "targets", that can't be cleaned up. Don't shoot glass bottles, TV's, containers of foam/pollutants, etc. Tin cans and water-filled plastic milk jugs are easy to pick up after and don't leave environmental contamination. When you are done, leave the place cleaner than you found it. I'm not asking you. I'm telling you.
Pathfinder45 is offline  
Old August 29, 2013, 04:07 PM   #27
skoal3
Member
 
Join Date: July 9, 2013
Posts: 27
+1 to what Pathfinder45 said and thank you. I like to shoot things that dance around, explode and make a mess just as much as everyone else but it is very important to clean it all up when your done. I clean up on my own private property every time because I don't like to see the mess, no one else does either. I work out in the woods and all these gates I have to open every morning are a pain in the ***. They probably wouldn't be there if the land didn't get abused so often. I'm sure no one on this forum goes out and leaves messes for others to clean up but it was a very good point to make.
skoal3 is offline  
Old August 29, 2013, 06:59 PM   #28
MaDMaXX
Member
 
Join Date: July 2, 2013
Location: Oregon from England
Posts: 93
I don't shoot over that side of town, but i've seen examples and can imagine how bad it got!!

That's just wrong, i hope people try harder to enjoy this sport and also that companies will realise the call for re-usable/reactive targets and release more and more affordable solutions.
MaDMaXX is offline  
Old August 29, 2013, 08:28 PM   #29
Kitgun
Member
 
Join Date: March 23, 2002
Location: Haslett Mi. USA
Posts: 59
Charcoal briquetes, cheap and when hit they go puff in a little black cloud.
Kitgun is offline  
Old August 29, 2013, 08:30 PM   #30
MaDMaXX
Member
 
Join Date: July 2, 2013
Location: Oregon from England
Posts: 93
Oh nice!!! Never thought of that, i'll have to try it
MaDMaXX is offline  
Old August 29, 2013, 08:30 PM   #31
Grizz12
Senior Member
 
Join Date: December 11, 2012
Posts: 311
Quote:
Charcoal briquetes, cheap and when hit they go puff in a little black cloud.
Ohh, I forgot about those, they are fun
Grizz12 is offline  
Old August 30, 2013, 07:07 AM   #32
Chestnut Forge
Senior Member
 
Join Date: August 21, 2013
Location: Polk, Pa
Posts: 123
We shoot golf balls with .22 pistols. Alot of fun to have a race with them. See who can get them down range first. Tomac has the bowling pin thing right. I've hit them with .338 and .300 Win Mags. Makes them fly around a bit. Marshmallows are another good target.
Chestnut Forge is offline  
Old August 30, 2013, 09:35 PM   #33
BigOne
Junior Member
 
Join Date: August 29, 2013
Posts: 4
Tannite

Mixing tannite and using white glue on the back of clay target, or anything really, adds a nice touch.
BigOne is offline  
Old August 30, 2013, 09:50 PM   #34
Revan
Junior Member
 
Join Date: July 28, 2013
Posts: 13
Nothing legal is better than tannerite!
Revan is offline  
Old August 30, 2013, 10:26 PM   #35
trg42wraglefragle
Senior Member
 
Join Date: April 21, 2008
Location: new zealand
Posts: 836
I've got some 1/4" steel plates in various sizes I shoot with 22 and my shotgun.
It's obvious when you hit them and they are instantly reset.

Other than that empty aluminium cans filled with water make a good explosion and can generally be found for free.
trg42wraglefragle is offline  
Old August 30, 2013, 10:27 PM   #36
4runnerman
Senior Member
 
Join Date: January 16, 2010
Location: Minnsota
Posts: 2,833
I was in same shoes here not more than a month ago. I think someone i here hd the idea. Make a stand like the letter H ,pound in ground and hang paint balls. Man is that fun, they explode big time.
__________________
NRA Certified RSO
NwCP- Performance Isn't Optional
4runnerman is offline  
Old August 30, 2013, 11:54 PM   #37
9mmfan
Senior Member
 
Join Date: May 26, 2012
Location: Weatherford, TX
Posts: 296
Another vote for tannerite. Not as cheap as some of these suggestions, but much more reactive. Particularly if'n you cut a hole in a pumpkin and set the canister inside. Orange goo a-flyin'. A little bit redneck and a whole lotta fun.
9mmfan is offline  
Old September 1, 2013, 11:59 AM   #38
arizona98tj
Senior Member
 
Join Date: December 10, 2007
Location: Arizona
Posts: 975
You are welcome to browse my reactive target review.

__________________
stu-offroad.com
Largest Jeep TJ project site on the web!
(now with guns)
arizona98tj is offline  
Old September 7, 2013, 11:31 PM   #39
SHE3PDOG
Senior Member
 
Join Date: January 27, 2013
Posts: 984
A few of my buddies decided they wanted to come shooting with me last weekend, but they wanted something fun to shoot at. We ended up going to one of the Halloween stores that have been popping up lately, and looked around. They bought 3 plastic skeletons. We used some tall scrap wood to stake into the ground and hold up the skeletons. They swung a lot when they were hit, and stood up to a pretty good beating from 8mm Mauser, 30-06, 40 S&W, 357 Mag, 5.56, and 22LR. The price was only like 15 bucks each too.
__________________
Semper Fi

Marine, NRA member, SAF Defender's Club member, and constitutionally protected keeper and bearer of firearms
SHE3PDOG is offline  
Old September 8, 2013, 06:23 AM   #40
dayman
Senior Member
 
Join Date: April 18, 2011
Location: The Woods
Posts: 1,101
It requires some clean-up, but cans of beer/soda are pretty fun to shoot.

They "react" a little more than clays, and can usually be had for around $0.50ea. Even less if you can find a place that sells expired beer.

edit:
Quote:
I quite fancy one of those duelling tree's i've seen on Hickok45's channel, though it looks to be about $350 for a 'normal' one from Salute Products
For anything made from steel, try to find a local welder. They'll probably be able to make it cheaper, and you'll make a new friend. Not having to ship a 80lb package cuts a lot from the final cost.
__________________
si vis pacem para bellum

Last edited by dayman; September 8, 2013 at 06:40 AM.
dayman is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:55 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.10400 seconds with 9 queries