The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old May 5, 2001, 09:00 PM   #1
handgunhunting
Senior Member
 
Join Date: October 26, 2000
Location: Maryland
Posts: 267
can anyone tell me anything about the 357 max.
1) can i use my 357 mag. dies to load them?
2) can i shoot 38 sp. or 357 mag out of a 357 max?
handgunhunting is offline  
Old May 5, 2001, 09:35 PM   #2
Byron Adams
Senior Member
 
Join Date: February 25, 2001
Location: Ellijay, GA
Posts: 176
357 max

I have a T/C 21" carbine in 357 max. I use my 357 mag dies for reloading. The RCBS carbide sizer needs no adjustment. I used a milk carton cap, cut a hole in it and it provided the proper gap for flaring and seating.I have shot 357 mag and 38 Special in mine with no loss of noticeable accuracy, but not on a regular basis. Groups will be lower.
Byron Adams is offline  
Old May 5, 2001, 09:38 PM   #3
Doug444
Senior Member
 
Join Date: January 30, 2001
Location: Draper, UT
Posts: 255
I've had a Contender in .357 Max. for over a dozen years. I got Max dies and have loaded Mag but not Spl. in them. I believe you could use Mag. dies, but you'd have to back off quite a bit - that might bet a bit dicey. I'd get a set of Max. dies if you're going to load a lot.

As for shooting the Mag. and Spl. in the Max. - yes they will be fine. As with any of these shorter rounds, make sure you clean the chamber thoroughly before shooting any of the longer cases in the gun as there could be a build-up of powder residue at the shorter case mouth that could result in a stuck case.

Doug444
Doug444 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:44 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06495 seconds with 9 queries