The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old June 18, 2013, 05:34 PM   #1
anthonycd1
Member
 
Join Date: January 9, 2013
Location: falmouth maine
Posts: 22
H4198 same as imr4198

I have some h 4198 but I see a lot of load data for 223 that's says imr 4198. Is this the same powder? Can they be used interchangably?
anthonycd1 is offline  
Old June 18, 2013, 07:45 PM   #2
243winxb
Senior Member
 
Join Date: July 26, 2011
Posts: 1,066
No, not the same. http://www.hodgdon.com/msds.html
243winxb is offline  
Old June 18, 2013, 09:46 PM   #3
mmb713
Senior Member
 
Join Date: March 15, 2011
Location: Salt Lake City, UT
Posts: 314
They are not identical but are extremely close and cover the same applications. Where one can be used the other can be used. Published data for both powders are abundant, just make sure you use data for the brand of 4198 you have. There will be overlap between the two powders but I wouldn't substitute one for the other. If you stick to the data for the powder you have you should be just fine. Hodgdon's website will have the info on both powders.

http://data.hodgdon.com/main_menu.asp
mmb713 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:26 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06715 seconds with 9 queries