The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old June 1, 2013, 04:56 PM   #1
bubbatheroach
Junior Member
 
Join Date: May 22, 2013
Posts: 9
Lee quick trim

So got the lee quick trim deluxe. So far I'm not to impressed but hav only used it for about 20 .223 cases so far. My problem is it trims cases .006 shorter than trim length, so instead of 1.750" I get 1.744. So my question is will the shorter length have a greater affect on anything? I have always been taught to do what the book says. Thanks for the input.

Bubba
bubbatheroach is offline  
Old June 1, 2013, 06:00 PM   #2
CrustyFN
Senior Member
 
Join Date: June 4, 2006
Location: West Virginia
Posts: 2,258
No .006 shorter than minimum shouldn't hurt anything. Load a couple and check to see if you have good case tension. I haven't seen one yet but in the reading I have done on it my impresson was that it should be adjustable. So you should be able to set the trim length to what ever you want.
__________________
I don't ever remember being absent minded.
CrustyFN is offline  
Old June 1, 2013, 08:40 PM   #3
bubbatheroach
Junior Member
 
Join Date: May 22, 2013
Posts: 9
From reading my instructions that is the longest length I could get, and the adjustments r in .001 increments shorter.
bubbatheroach is offline  
Old June 1, 2013, 09:53 PM   #4
HJ857
Senior Member
 
Join Date: January 9, 2007
Location: haslett, mi
Posts: 361
Mine's the other way around. The shortest I can get it is 1.754.

Have you tried backing out the trim die a bit, that should keep the case further away from the cutter.
HJ857 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:44 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05881 seconds with 9 queries